1918
Your rst ride
1. Make sure you have a good internet connection and log into the simulator with
your email and password.
2. Place your phone on the stand (see illustration in step 7 of the assembly) and
open the Bkool Remote app. You will use this app to control the resistance of your
Smart Bike automatically or manually and to interact with the Bkool simulator. If you
have any questions, see the Bkool Remote app manual in the “Help” section.
3. In the simulator, select the session you want to do, click on it and then click on
the “Start” button.
And remember, if you want reliable data, we recommend doing an FTP test (5 or 20
minutes) as quickly as possible. That way you’ll know your exact tness level and the
Smart Bike will automatically adjust to it. You can nd it in the Bkool simulator
in “Search > Create FTP Test > 5-min FTP test”.
What to do if...
The simulator doesn’t detect the bike. Make sure the bike is plugged in. If using
Windows, the bike must be connected to your computer via Bluetooth before it can
be synced with the simulator. Make sure it is properly connected. If using an ANT+
connection, the USB ANT+ must be connected to the computer or tablet.
A device isn’t detected. Make sure the device is active. To detect a heart rate
monitor the strap must be rmly around the chest. To detect a cadence sensor, the
pedals must be turning. The USB ANT+ must be connected to the computer or tablet.
You can’t log into the simulator. Make sure you’ve entered the same email and
password you used to register at bkool.com. Make sure you have internet access
and that your antivirus or rewall aren’t preventing the simulator from connecting to
the internet.
Help. If you have any questions, see the help section at bkool.com
Manuals and Videos. There are manuals and videos for the simulator and bike in
the Help section at bkool.com.
Safety warnings
Smart Bike
Make sure that all of the components described in the assembly section are
securely attached to the bicycle. If they are not, the user could fall of the bicycle.
Electrical connection. Properly plug the transformer into the outlet and to the
connection on the bike. Your electrical installation must conform to the standards
or regulations in eect in the country where the bike is being used. The connection
to the mains must be easily accessible..
Use original spare parts. If the transformer is damaged, it must be replaced with
another supplied by Bkool or by its after-sales service.
Cleaning. To clean the bike, use a cloth dipped in water or a mild cleaning solution.
Be sure to unplug it before cleaning it. Do not allow any cleaning products to enter
the resistance unit.
Users
Users Users who can use the bicycle. The bicycle is intended for use only by
people who have the physical, sensory and mental abilities needed to make the
eort required by any exercise routine. We recommend asking your doctor if you
are t enough to engage in the physical activity required to use the bike. Even if you
meet the above requirements, you must have sucient experience or knowledge,
or have received adequate training, to use this exercise equipment.
Users who can NOT use the bicycle. Under no circumstances should the bike
be used by individuals with diminished physical, sensory or mental capacities. It is
also not intended for children. The bicycle must be kept out of the reach of these
individuals.
Health recommendations. If you do not feel well while exercising, or if you feel
weak, discomfort, pain or tightness of the chest, or if you are short of breath or
have an irregular heartbeat, stop using the bicycle. We recommend checking with
your doctor.
4
5
6
