Bishamon KGL20NH Manuel d'utilisation

Read this manual carefully and understand completely before operating stackers. Keep filing this

manual for future reference. If this copy is lost, please contact your local supplier for a replacement.

Read the Operation Manual NEVER go under table. NEVER sit, stand or ride on

thoroughly before using table. SEVERE PERSONAL

the Stacker. Important or DEATH could result. INJURY or DEATH could

Warnings are described. result. or uncontrollable. SEVERE

*Incorrect operation may PERSONAL INJURY and

result in an accident.

result.

DO NOT operate or turn DO NOT overload lifter.

Distribute the load on table

higher position, or it may designated capacity and

result in falling of the load. load center rating. INJURY or DEATH could

result. DAMAGE.

KEEP AWAY from open SHOCK HAZARD !

wheels that could result in

create loss of control and Handle battery after fully Emergency Stop Button

reading instruction manual. before handling battery.

INJURY.

DO NOT use Stacker on slope,

unlevel or soft surface. Stacker

may become unstable and /

PROPERTY DAMAGE could

around when load is kept at

USE ONLY in areas clear of

ALWAYS stay within the all personnel and objects to

DO NOT load on end of table.

Disconnect power and push

SEVERE PERSONAL INJURY

result in SEVERE PERSONAL

flame when charging battery.

evenly. Or SEVERE PERSONAL

DO NOT use in areas of multi

prevent SEVERE PERSONAL

KEEP FEET CLEAR of rolling

SEVERE PERSONAL INJURY.

level floor surface that could

INJURY and PROPERTY

In this manual, 「Warning」, 「Caution」are defined and specified as below. Notice of Warnings are

very important for safe operations. As these are very Important to protect operators from accidents

resulting in personal injury and death, and damage to property, so make sure to read thoroughly and

understand fully before operation.

Warning Incorrect operation may result in serious injury or death of the operator.

Caution Incorrect operation may result in injury and damage to the property. The

occurence of the danger is lower than "Warning" articles.

Explanation of Terms and Symbols

1. READ THIS MANUAL COMPLETELY BEFORE USING AND THOROUGHLY UNDERSTAND AND FOLLOW

ALL SAFETY INSTRUCTIONS.

2. DO NOT exceed the rated load capacity.

3. KEPP HANDS OFF moving parts such as chain and pulley.

4. KEEP FEET CLEAR of rolling wheels that could result in severe personal injury.

5. DO NOT LOAD the platform stacker improperly centered on the table.

ENSURE that the load is evenly distributed. UNBALANCED loads may become unstable and fall.

SEVERE PERSONAL INJURY and PROPERTY DAMAGE COULD RESULT.

6. NEVER modify the platform stacker in any manner without prior written consent of Sugiyasu Corporation.

7. Perform the regular maintenace according to the manual.

Model No. KGL20NH

Capacity(kgs) 200

A Vertical Travel (mm) 980

B Min. Height (mm) 150

C Max height (mm) 1,130

D Overall Height (mm) 1,344

E Overall Width (mm) 569

F Overall Length(mm) 919

G Table Width (mm) 541

H Table Length (mm) 600

Rising Speed 37

Lowering Speed 37

Rising Speed 55

Lowering Speed 37

I Load Center (mm) 300

J Front Wheel Diameter (mm) 125

K Rear Wheel Diameter (mm) 125

L Minimum Turning Radius (mm) 788

Machine Weight (kgs) 58

Table Height

Without Load (Sec.)

With Full Load (Sec.)

NEVER OPERATE THE PLATFORM STACKER IF IT MALFUNCTIONS, HAS BROKEN, DAMAGED OR WORN

PARTS. USE OF THE PLATFORM STACKER IN THIS TYPE OF CONDITION COULD RESULT IN SEVERE

PERSONAL INJURY OR PROPERTY DAMAGE.

1 Check for any distortion, stress cracks or breaks in welds, materials and castings (Frame Pipe and Table).

2 Check for any distortion, stress cracks or breaks in welds and materials (Table).

3 Check for smooth rolling and free rotation of the wheels.

4 Check for rust, crack and kink in chain.(Monthly)

5 Check for the function of brake.

6Check if table rise when pushing "UP" button.

7Check if table lower when pushing "DOWN" button.

8Check for any abnormal noise from screw cylinder during rising and lowering operation.

① Put load on forks so that CG of the load can be located at center of

table.

① Push "DOWN" button to lower table. Table stop lowering when releasing button.

① Push "Emergency Lowering" button to lower table. Table stop lowering when releasing button.

① Push "Emergency Stop" button to stop.

・When button is being kept pushed (locked), electricity is not supplied.

・Turn button clockwise to release locking.

② Push "UP" button to raise table. Table stop rising when releasing button.

Hold the Handle Pipe of inclining area and maneuver the stacker slowly.

Brake (Wheel Lock) is equipped at right side caster.

(Both wheels get locked at same time firmly)

① Lock the Brake (wheel)

Push down Brake Pedal

② Release the Brake

Push down Lock Release Pedal

Slide the battery along with rail and insert until lock hook clicks into place.

Release Lock Hook and then pull up battery.

Perform the periodic inspections for safe operation.

The below show how to deal with relatively minor malfunctions. For other further issues,

please contact your supplier of this stacker.

・ Insufficiency of a battery

・ Loose Motor Cable, or

Wiring Breakage

・ Loose Cable of Switch

・ Loose Motor Cable, or

Wiring Breakage

・ Loose Cable of Switch

Beep sound during operation ・ Insufficiency of a battery

Does Not Rise with loaded ・ Load is exceeding capacity → Reduce load to below capacity

When disposing of this stacker, dispose of the metal, non-metal, plastic, and hydraulic oil

components separately. There are regulations for disposing of the hydraulic oil, so make

sure to sourt and follow the local rules. If you have any questions regarding disposal,

please check with your supplier of the stacker.

Warranty

Should the unit malfunction within the warranty period (Within one (1) year of purchase)

when it has been operated in accordance with the user manual and the warning labels on the

unit, we will adjust the defective component, repair it, or send a replacement part free of

charge. However, this does not apply in the case of secondary damage or any damage to

which any of the following apply :

(1) Damage or injury resulting from incorrect operation, improper inspection, improper

storage, or any other type of negligence

(2) Damage of injuries resulting from changes (modifications) that negatively impact the

product's operation mechanism

(3) Consumable parts that are damaged and need to be replaced

(4) Damage or injury resulting from fires, earthquakes, wind, floods, or other natural

disasters or external factors

(5) Problem resulting from specified parts not being used

(6) Error in the warranty claim process (Ex : failure to indicate Model or Serial No. etc.)

(7) Damage or injury resulting from installation

(8) Repairs performed not by our company or not by our authorized dealer

(9) Damage confirmed to be the result of overuse, user error, or accident

Furthermore, all rubber components and other naturally degradable products used in this

products and its accessories, as well as all consumable products, fall outside the scope

of this warranty.

How to Claim Warranty

If you decide to file claim for this product based on the above, please contact your dealer.

The dealer will carry out the necessary procedures. In addition, we can not decide whether

or not any particular situation falls within the scope of this warranty.

Does Not Lower without load

→ Charge battery, or replace battery

Symptoms of malfunction Possible Cause Action

→ Connect Cable, or replace

Button, or Wiring Breakage

Does Not Rise without load

→ Charge battery, or replace battery

・ Insufficiency of a battery (Can be lowered by Emergency Lowering Button)

→ Connect Cable, or replace

Button, or Wiring Breakage

This Stacker is not waterproof, so rust, corrosion, short citcuits, and other damage caused

by water is not covered under warranty.

・Product does not work properly →Review the manual and try to find solution

→Contact your supplier and request repairs

→

・Repairs out of warranty period →Consult with your supplier

・Availability of Spare Parts →

Contact your lifter supplier for any information regarding after service.

When contacting your lifter supplier, provide following information.

・Model No.

・Serial No.

・Purchase Date

・Conditions of trouble

Record the above information in the table below for future inquiries.

Type

Serial No.

Purchase Date

Stacker Supplier

Installer

Date :

・Product still does not work properly

・Repairs within the warranty

period

The warranty is valid one year from the date of

purchase. We will service your product in

accordance with warranty conditions.

The spare parts are available for 8 years after

discontinuing manufacturing

Trouble Date and conditions

3-21, 4-Chome, Hongo-Cho, Takahama City,

Aichi, Japan 444-1394

Tel. 81-566-53-1126, Fax. 81-566-53-1844

http//www.bishamon.co.jp/

Autres manuels Bishamon Système de levage

Bishamon

Bishamon LX25SA Manuel d'utilisation

Bishamon

Bishamon KGL20NHF Manuel d'utilisation

Bishamon

Bishamon BSC3200 Series Manuel d'utilisation

Bishamon

Bishamon LV50WE Manuel d'utilisation

Bishamon

Bishamon SCL3000A Manuel utilisateur

Bishamon

Bishamon Multi Lift MUS40U Manuel utilisateur

Bishamon

Bishamon ST30EWW Manuel d'utilisation

Bishamon

Bishamon MUL30 Manuel utilisateur

Bishamon

Bishamon NSP3500N Manuel d'utilisation

Bishamon

Bishamon NSA3500N Manuel d'utilisation

Bishamon

Bishamon STS15 Manuel d'utilisation

Bishamon

Bishamon FP3500 Manuel utilisateur

Bishamon

Bishamon ESC32UF Manuel utilisateur

Bishamon

Bishamon X Series Manuel d'utilisation

Bishamon

Bishamon Lift2K Manuel utilisateur

Bishamon

Bishamon TORTOISE III Manuel d'utilisation

Bishamon

Bishamon ST50A Manuel d'utilisation

Bishamon

Bishamon LV50W Manuel d'utilisation

Bishamon

Bishamon SPA4000 Manuel utilisateur

Bishamon

Bishamon A031810 Manuel utilisateur

Manuels Système de levage populaires d'autres marques

morse

morse 82H-124 Manuel utilisateur

Braun

Braun NL955 Series Manuel utilisateur

haacon

haacon 1889.10 Manuel utilisateur

Protekt

Protekt AT 252 Manuel utilisateur

R. Beck Maschinenbau

R. Beck Maschinenbau HS 600 Manuel utilisateur

Nova Technology International, LLC

Nova Technology International, LLC NAS Series Manuel utilisateur

Genie

Genie Z-60/34 Manuel utilisateur

Screen Technics

Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur

Mortuary Lift

Mortuary Lift ULTIMATE 1000 Manuel utilisateur

Custom Equipment

Custom Equipment Hy-Brid 3 Series Manuel de programmation

Custom Equipment

Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation

Hy-Brid Lifts

Hy-Brid Lifts HB-P3.6 Manuel de programmation

BERG

BERG BeNomic EasyLeaf Manuel utilisateur

Powermate

Powermate LiftGate LG-3 Manuel utilisateur

Snorkel

Snorkel TM12 Series Manuel utilisateur

Terberg

Terberg OMNIDEKA Manuel utilisateur

Harmar Mobility

Harmar Mobility AL625 Mode d'emploi

Rotary

Rotary SPO16 Manuel utilisateur