BIRO AFMG-52 Manuel de service
PTCT
AFMG-52
232-6-10-13
STANDARD AND OPTIONAL
STAINLESS STEEL BOWLS, AUGERS & END RINGS
(130mm UNGER & ENTERPRISE) ..............................................18
PRODUCT MIXER SAFTY COVERS & LID LOCKS................................19
- NOTE -
A copy of this manual is included with each AFMG-52 MIXER GRINDER.
The descriptions and illustrations contained in this manual are not binding. The
manufacturer reserves the right to introduce any modification without
updating the manual.
1
CLEANING THE BOWL - RING AND WORM
CARE OF TIN COATED PRODUCTS
(DO’S AND DON’TS)
1. Do not use abrasive cleaning materials, such as Brillo pads or metal scrapers. Tin is a soft metal and should be cleaned
with a soft cloth and dried.
2. Do not use a cleaning agent containing a high percentage of free alkali or acid.
3. Do not use detergent containing a high percentage of tri-sodium phosphate or meta-silicate. Tin is reactive to both.
4. Rinse well and dry thoroughly after washing to remove agents that may be reactive to tin.
5. If sterilizing agent containing chlorine is used, the tinned surface must be thoroughly rinsed. Chlorine is corrosive to tin.
6. Dry thoroughly after rinsing and store in a dry environment.
7. If water is exceptionally hard, drying will be necessary to prevent spotting.
Autres manuels pour AFMG-52
1
Autres manuels BIRO Broyeur
BIRO
BIRO AFMG-52 Manuel de service
BIRO
BIRO 922 Manuel d'instructions
BIRO
BIRO AFMG-48-II Manuel de service
BIRO
BIRO 722 Manuel d'utilisation
BIRO
BIRO 8-12 Manuel d'utilisation
BIRO
BIRO EMG-32 Manuel utilisateur
BIRO
BIRO AFMG-48-II Manuel de service
BIRO
BIRO AFMG-48-II Manuel de service
BIRO
BIRO Mini-32 Manuel de service
BIRO
BIRO MINI-22 Manuel utilisateur
