Birch DSP-850 Series Manuel utilisateur

DSP-850 Series Customer Display

User Manual

2006 July V1.6

Manual Version 1.6

The information contained in this document is subject to change without notice.

We make no warranty of any kind with regard to this material, including, but not

limited to, the implied warranties of merchantability and fitness for a particular

purpose. We shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance, or use of

this material.

This document contains proprietary information that is protected by copyright. All

rights are reserved. No part of this document may be photocopied, reproduced or

translated to another language without the prior written consent of the

manufacturer.

General Notice: All the company names used herein are for identification

purposes only and may be trademarks of their respective companies.

Safety

IMPORTANT SAFETY INSTRUCTIONS

1. To disconnect the machine from the electrial power supply, turn off the power

switch and remove the power cord plug from the wall socket. The wall socket

must be easily accessible and in close proximity to the machine.

2. Read these instructions carefully. Save these instructions for future reference.

3. Follow all warnings and instructions marked on the product.

4. Do not use this product near water.

5. Do not place this product on an unstable cart,stand,or table.The product may

fall, causing serious damage to the product.

6. Slots and openings in the cabinet and the back or bottom are provided for

ventilation;to ensure reliable operation of the product and to protect it from

overheating. These openings must not be blocked or covered.The openings

should never be blocked by placing the product on a bed, sofa, rug, or other

similar surface.This product should never be placed near or over a radiator or

heat register,or in a built-in installation unless proper ventilation is provided.

7. This product should be operated from the type of power indicated on the

marking label.If you are not sure of the type of power available, consult your

dealer or local power company.

8. Do not allow anything to rest on the power cord. Do not locate this product

where persons will walk on the cord.

9. Never push objects of any kind into this product through cabinet slots as they

may touch dangerous voltage points or short out parts that could result in a fire

or electric shock.Never spill liquid of any kind on the product.

FCC

This device complies with part 15 of the FCC rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference received, including interference that

may cause undesired operation.

CE Mark

This device complies with the requirements of the EEC directive

89/336/EEC with regard to “Electromagnetic compatibility” and

73/23/EEC “Low Voltage Directive”.

LEGISLATION AND WEEE SYMBOL

2002/96/EC Waste Electrical and Electronic Equipment Directive on the

treatment, collection, recycling and disposal of electric and electronic

devices and their components.

The crossed dustbin symbol on the device means that it should not be disposed of

with other household wastes at the end of its working life. Instead, the device

should be taken to the waste collection centers for activation of the treatment,

collection, recycling and disposal procedure.

To prevent possible harm to the environment or human health from uncontrolled

waste disposal, please separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this

product, or their local government office, for details of where and how they can

take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions

of the purchase contract.

This product should not be mixed with other commercial wastes for disposal.

Table of Contents

A. 2 X 20 CUSTOMER DISPLAY

1. CHECKLIST.........................................................................................................7

2. FEATURES..........................................................................................................7

3. SPECIFICATION..................................................................................................8

4. INTERFACE.........................................................................................................9

4.1. SPECIFICATION................................................................................................9

4.2. DISPLAY BASE.................................................................................................9

4.3. CONNECTOR...................................................................................................9

5. DIP SWITCH AND SOFTWARE SETTING........................................................ 11

5.1. COMMAND TYPE SELECTION .......................................................................... 11

5.2. BAUD RATE SELECTION ................................................................................. 11

5.3. PARITY CHECK SELECTION............................................................................. 11

5.4. DEMO MODE SELECTION ............................................................................... 11

5.5. INTERNATIONAL CHARACTER SET ...................................................................12

5.6. COMMAND CONTROL .....................................................................................12

6. SOFTWARE STATUS SETTING COMMANDS .................................................13

6.1. BAUD RATE SETTING COMMAND.....................................................................13

6.2. PARITY CHECK SETTING COMMAND ................................................................13

6.3. INTERNATIONAL CHARACTER SET SETTING COMMAND......................................14

6.4. COMMAND TYPE SETTING COMMAND..............................................................15

6.5. SHOW FIRMWARE VERSION............................................................................15

7. COMMAND LIST TABLE ...................................................................................16

8. COMMAND DETAILS ........................................................................................18

8.1. DSP-850

SERIES COMMAND LIST...........................................................................................18

8.2. CD5220 STANDARD MODE COMMAND LIST.....................................................19

8.3. UTC STANDARD MODE COMMAND LIST ..........................................................21

8.4. UTC ENHANCED MODE COMMAND LIST..........................................................21

8.5. AEDEX/EMAX MODE COMMAND LIST ...........................................................22

8.6. ADM787/788 MODE COMMAND LIST ...............................................................22

8.7. DSP800 MODE COMMAND LIST .....................................................................23

8.8. EPSON ESC/POS COMMAND LIST ...............................................................24

9. CHARACTER SET.............................................................................................26

9.1. CHARACTER CODE 20H –7EH ......................................................................26

9.2. CHARACTER CODE 80H –FFH ......................................................................27

10. DISPLAY MODULE DIMENSION...................................................................31

B. 1 X 12 CUSTOMER DISPLAY

1. CHECKLIST.......................................................................................................32

2. FEATURES........................................................................................................32

3. SPECIFICATION................................................................................................33

4. INTERFACE.......................................................................................................34

4.1. INTERFACE SPECIFICATION.............................................................................34

4.2. DISPLAY BASE...............................................................................................34

4.3. CONNECTOR.................................................................................................34

5. COMMAND LIST TABLE ...................................................................................36

6. COMMAND DETAILS ........................................................................................38

7. CHARACTER SET.............................................................................................43

8. DISPLAY MODULE DIMENSION ......................................................................44

(2 X 20 CUSTOMER DISPLAY AND 1 X 12 CUSTOMER DISPLAY)

APPENDIX A - COMMAND DETAILS .......................................................................45

APPENDIX B - CONTROL CODE SET.....................................................................48

A. 2 x 20 Customer Display

1. Checklist

Pole Display Module

Flat Cable (DB-9P to DB-9P

Flat Cable Connector)

Base Unit

Two Pieces of Pole Support

(1x22cm, 1x9cm)

Installation Guide

Power Adapter

2. Features

1. Data can be display on 20 columns x 2 lines.

2. Blue–green color and large character are easy to see.

3. The DIP switches setting emulate commands mode, baud rate and international

character.

4. Command emulation modes include: POS7300, EPSON ESC/POS, ADM787/

ADM788, DSP800, AEDEX/ EMAX, UTC, and CD5220.

5. Display area can be controlled by window function.

6. Provides an interface based in RS-232C, and RS232C baud rate from 4800 to

38400 bps.

7. Reverse characters can be specified using the Epson command set.

501 mm

191 mm

225 mm

93 mm

281 mm

3. Specification

NO Item Description

1 Display method Vacuum fluorescent display

2 Number of character 40 characters

(20 columns x 2 lines)

3 Character font 5 x 7 Dot matrix

4 Display color Blue green

5 Brightness 700 cd /㎡

6 Character type 96 alphanumeric

13 kinds of international character set

7 Character size 9.0mm x 5.25mm

8 Power supply 11-19VDC

Manufacture offer +12V power adapter

9 Power consumption 3 - 6 W

10 MTBF 25000 hours (power on time)

11 Panel dimensions 224 (W) x 93 (H) x 50(D) mm

12 Support dimensions Long support : 22 cm

Short support : 9 cm

13 Base dimensions 190(w)x55(h)x96(d)mm

14 Viewing angle -5 - 60 degrees

15 Rotation angle Maximum 270 degrees

16 Weight 1.25 Kg

17 Operating temperature 5 - 45℃

18 Operating Humidity 30%-85%

19 Storage Temperature -10 - 55℃

20 Storage Humidity 10%-85%

4. Interface

4.1. Specification

Data transmission Serial

Synchronization Asynchronous

Handshaking DTR / DSR

Signal level

MARK = -3 to –15 V (logic “1”)

SPACE = +3 to +15 V (logic “0”)

Baud rates 4800,9600,19200,38400 bps

Parity None, even

Bit length 8 bits

Stop bits 1 bit

4.2. Display Base

The picture below shows the configuration of the stand alone VFD Pole Display base.

Figure of VFD Pole Display Base

4.3. Connector

PWR COM RJ45

PWR: Power input connector from adapter

10 1

Connector type: DC jack (5.5/2.1)

Pin assignment

No Signal

+ Vin

- GND

RJ45: Connect to display panel

Connector type: Phone-jack 10P/8C

COM: RS232C link to PC/HOST connector (9-pin)

Connector type: D-sub 9 pin female

1 5

6 9

Table des matières

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation