BIOS Professional 601SC Manuel utilisateur

•••

DIGITAL

PORTION CONTROL

SCALE

601SC

INSTRUCTION MANUAL

601SC

DIGITAL PORTION SCALE

Thank you for purchasing the BIOS Professional Digital Portion Scale.

Please read all operating instructions carefully before use. This electronic

scale is a precision instrument. With normal care and proper treatment, it

will provide years of reliable service.

Please read all operating instructions carefully before using. Please note

the following points:

• Never load the scale with more than the maximum capacity. Overloading

can permanently damage it!

• Avoid any exposure to extreme heat or cold, your scale works better

when operated at normal room temperature. Always allow the scale to

acclimate to normal room temperature for at least 1 hour before use.

• Give your scale sucient warm up time. Usually 30 seconds to give the

internal components a chance to stabilize before calibration.

• Keep your scale in a clean environment. Dust, dirt, moisture,

vibration, air currents and a close distance to other electronic

equipment can all cause adverse eects on the reliability and accuracy

of your scale.

• Handle with care. Gently apply all items to be weighed onto tray top.

Although this scale is designed to be quite durable, try to avoid rough

treatment as this may permanently damage the internal sensor.

• Avoid shaking, dropping or otherwise shocking the scale. This is a

precision instrument and must be handled with extreme care.

• Only operate the scale on a stable, vibration free surface.

FEAUTRES:

• High-precision straining resistance sensor

• Standard weight auto-calibration

• Auto zero

• Auto o (after 120 seconds of inactivity)

• Full tare capacity

• Bright-blue backlit LCD display

• Low battery and overload indications

• Stainless steel platform

• Transparent cover protects the scale when not in use

• 7 Weighing modes: kg, lbs, g, oz, lb-oz, lb-¼oz, ¼oz.

• Power supply: 4 x AA rechargeable batteries and power adapter

included

OPERATING INSTRUCTIONS:

1. Put the scale on a at level surface.

2. Connect the scale to adapter or insert batteries, press ON / OFF

to start.

3. Once the digital screen shows [0] the scale is ready to be used.

DESCRIPTION OF BUTTONS:

PUSH TARE BUTTON:

When the scale is on, if the platter is empty and the scale shows a

reading other then zero, press the PUSH TARE button for approximately

3 seconds. To TARE is to remove the weight of an item that is on the

scale platform.

1. Turn on the scale as described above.

2. If the scale shows a reading other then zero press the PUSH TARE

button for approximately 3 seconds. [0] will show on the screen.

UNIT BUTTON:

To switch between the dierent measuring units, when there is a reading

on the screen, press the UNITS button to select a dierent measuring

mode.

LIGHT BUTTON:

The backlight is controlled by the LIGHT button. To turn the backlight on

and o press the LIGHT button.

CALIBRATION:

The Digital Portion Scale is calibrated at the factory to give you years

of reliable and accurate measurements. Calibration requires technical

knowledge and standard test weights. Calibration should only be

performed by a scale technician.

1. To calibrate the scale start with the scale o and proceed to turn it

on by pressing the ON / OFF button.

2. When the digital screen displays [0], press and hold the UNITS button

for 5 seconds, until [CAL] is displayed, release the UNITS button.

3. Press the UNITS button again, the display will ash a weight. Add the

calibration weight on the middle of the platform. The LCD display reads

[PASS] and will return to the normal weighing mode.

4. The scale is calibrated and can be turned o by pressing the ON / OFF

button to turn o the scale.

NOTE: Repeat this process if necessary.

SPECIFICATIONS:

Capacity 15 kg / 33 lbs / 529 oz / 15000 g

Graduations 2g

Units kg, lbs, g, oz, lb-oz, lb-1/4oz, 1/4oz

Tare Yes

Auto o Yes after 120 seconds

Low battery

indicator

Yes

Over load

indicator

Yes

Platform size 7” x 7”

Power Source 4 x “AA” (1.5V) rechargeable batteries or

AC/DC 110v - 240v Power Adapter

TROUBLESHOOTING:

The primary reasons for inaccuracy or malfunction are low batteries,

incorrect calibration, overload or operating on an unstable surface. Please

keep these in mind and maintain and operate your scale properly. The

scale is a precise instrument and must be handled with the upmost care

and caution.

DISPLAY READINGS REASON FOR DISPLAY

OUT2 Keep scale clean under platform then calibrate

and reboot the scale

UNSE Put scale in more stable position

EEEEE Scale is overloaded and will have to be

recalibrated

LO or NO SIGNAL Batteries to be recharged

ONE YEAR WARRANTY:

If this product proves to be defective in material or workmanship within

one year of purchase, please return it to the address below. It will be

repaired or replaced without charge upon receipt of the unit prepaid.

Please include return courier or best return method if unit is not declared

defective. Please include your full name, address, daytime phone number

or email address.

16975 Leslie Street

Newmarket, ON L3Y 9A1

www.biosprofessional.com

TH2844_111011

Table des matières

Manuels Échelle populaires d'autres marques

AWS

AWS ZEO-50 Manuel utilisateur

Gima

Gima Glass Body Fat Analyzer Manuel de la liste des pièces

Seca

Seca 374 Manuel utilisateur

TEC

TEC TEC SL59 SERIES Manuel utilisateur

Axis

Axis B/E Series Manuel utilisateur

Alecto

Alecto ACW-40 Manuel utilisateur

Rice Lake

Rice Lake MSI-4260 IS Manuel utilisateur

IKA

IKA RCT basic safety control Manuel utilisateur

ADE

ADE M20011 Manuel utilisateur

Duronic

Duronic KS3000 Manuel utilisateur

Digi

Digi SM-720 Manuel utilisateur

Cardinal

Cardinal CS Series Manuel utilisateur

Korona

Korona Kastella Manuel utilisateur

A&D

A&D FC-50Ki Manuel utilisateur

BDA

BDA CAMARGUE Manuel utilisateur

Tanita

Tanita HD-357 Manuel utilisateur

Leifheit

Leifheit 03173 Manuel utilisateur

Lumme

Lumme LU-1340 Manuel utilisateur