GeneQuantTM 1300 Quick Reference Guide Page 6 Version 2.0
Parameter Folder Sub-Folder Manual
page
Description and options
Factor Life Science OD600 25 Enter the factor. Range 0 – 9999. Only
available if units are cells/ml
Folder Ulitilites Folder Names 63 Select a folder to rename. Options:
Methods 1-9 or Favourites
G Life Science Nucleic Acids - Oligo 17 Enter the proportion of Guanine bases.
Default is 10, range: 0 – 9999. Only an
option when units are pmol/µl
Game Utilities Sudoku - Setup 64 Select the game number. Range 1-50. Only
available if ‘Computer’ (the 50 preset
games) is selected as the game mode
Games Utilities Preferences 63 Select whether the games function is on or
off. Options: yes or no
History Utilities Preferences 63 Select whether to use previously entered
parameters when the instrument is switched
on or to use default values. Options: On or
Off
Hour Utilit Date and Time 62 Enter the hour. Range 1-24
Interval Applications Kinetics – Parameters 1 50 Enter the interval time in seconds between
measurements: 5, 10, 20, 29 or 60 seconds
Language Utilities Regional 62 Select the language used on the display
screen. Options: English , French, Italian,
Japanese or Spanish
Minimum peak
height
Applications Wavescan, options 4 –
peak detection
48 This selects the minimum height above the
highest of the two adjacent minima, that a
peak must be if it is to be detected
Minimum peak
width
Applications Wavescan, options 4 –
peak detection
48 This selects the minimum width, in nm, a
peak must be to be detected (width =
difference in wavelength between the
higher of the two adjacent minima and the
opposing intersection of that higher
minimum level and the peak profile). Range
1-190 nm, default 5 nm
Minutes Utilities Date and Time 62 Enter the minute. Seconds are zeroed when
OK is pressed
Mode Applications Concentration 45 Select ‘Factor’ if the factor is known or
‘Standard’ if it will be calculated from a
standard of known concentration
Mode Applications Kinetics – Parameters 2 50 Select the measurement mode: Delta A –
change in absorbance over the
measurement duration; Final A –
absorbance at the end of the measuremnt
duration; slope – rate of change of
absorbance over the measurement duration
Mode Applications Single Wavelength
Wavescan
43
47
Select the mode of measurement –
Absorbance or % Transmission
Mode Utilities Sudoku - Setup 64 Select the mode – Computer, for 50 preset
games, or User to enter your own pattern
Month Utilit Date and 62 Select the month
Multiplier Life Science OD600 25 Select the multiplier: 1000 or 1,000,000.
Only available if units are cells/ml
New Name Utilities Folder Names 63 Enter a new name for the folder
Number Format Utilities Regional 62 Set the decimal point style: 999,9 or 999.9
Other MW Life Science Tm Calculation 21 Only available if counter ion is ‘Other’
Time
ies
