bioBidet A3 Document technique
rebmuNegaPdraobpilC
Installation
Manual &
Operating
Instructions
WARNING Do Not over-tighten
plumbing connections.
Over-tightening plumbing
connections can damage parts and
cause leaks.
2
BIO BIDET A3
CONTENTS
............................. 4
.................................................................. 5
.......................................................... 6
...................................................... 7
8 - 9
.............................................................. 10
................................................................ 12
Read this manual carefully
and install properly
This product should be installed
accordingly to the manual
Keep this manual for future reference
Functions and Characteristics
Parts list
Configuration
Final Assembly
Installation Instruction
Operation
Maintenance
Warranty
Contact
3
..............................
....................................................... 11
BIO BIDET A3
Ambient temperature bidet
model
Ingenious splash guard
Continuous Controlled
Water Stream
No electricity or battery
required
Connects directly to
fresh water line
Built-in cold water by- pass
Adjustable pressure
Control
Quality silver brass parts
Brass T valve
Retractable nozzle for
better hygiene
Splash Guarded Nozzle
P.S.P.C (Positive Stepping
Pressure Control)
Double sided body panel
Functions and Characteristics
4
Sliding seat hook coupling(12-25cm)
Water pressure control lever
and Function selection
Self-cleaning
BIO BIDET A3
Parts List
Name Quantity
Bidet 1
7/8” T Adapter 1
Braided Metal Hose 1
Protective O rings 2
Owner’s Manual 1
5
BIO BIDET A3
Configuration
6
7.88"
6.69"
5.51"
4.33"
4.88"
BIO BIDET A3
Tighten connections while checking
for leaks. Do not over tighten.
7
control knob
Seat
Flexible
hose
Main body of bidet
Adapter
Valve Stool
Water
tank
BIO BIDET A3
Installation Instructions
1. CAUTION
2. PROCEDURES OF ASSEMBLY
3
Shut water supply off by turning
it to the right and disassemble the
water hose.
Flush toilet to drain water inside of
toilet water tank before
disassembling the water hose.
1
8
Do Not over tighten any connections.
Over tightening connections and adaptor can
cause damage to the parts.
BIO BIDET A3
4
Remove existing seat and lid.
Release the bolts on both sides of
the existing toilet seat.
2
3
Connect supplied universal 7/8” T
valve to the fill valve underneath of
toilet water tank and connect water
supply hose between universal 7/8”
and shut off valve
3
3
Mount bidet and toilet seat/lid over
toilet mounting holes.
Supplied rubber O-rings should be
placed under the bidet mounting
bracket to protect and secure the
bidet on the toilet.
4
3
5
9
Connect water supply hose
between bidet inlet and universal
T valve
Seat
BIO BIDET A3
3
3
10
Using BIO BIDET A3
To use the posterior wash begin turning the dial clockwise
from the OFF position.
Pressure can be controlled by how far the dial is turned.To
increase the water pressure continue to turn the dial further,
in order to reduce water pressure turn the dial back towards
the center.The visual markings around the dial will help
depict the amount of pressure selected.
It is recommended that women lean forward slightly for
the spray to reach all areas during the feminine wash cycle.
Self-Cleaning
The self cleaning operation is accessed by turning the dial in
the counterclockwise direction.This will flush out and allow
water to flow over the nozzle.
Operation
BIO BIDET A3
Autres manuels pour A3
1
Table des matières
Autres manuels bioBidet Produits de plomberie
bioBidet
bioBidet dib Special Edition Manuel utilisateur
bioBidet
bioBidet BB-600 Mode d’emploi
bioBidet
bioBidet Discovery DLS Manuel utilisateur
bioBidet
bioBidet STREAM SPECIAL EDITION A5 Guide de dépannage
bioBidet
bioBidet PEARL S-100 Manuel utilisateur
bioBidet
bioBidet FLOW X-1000 Manuel utilisateur
bioBidet
bioBidet BB-800 Document technique
bioBidet
bioBidet SlimEdge Manuel utilisateur
bioBidet
bioBidet BB-400 Manuel de l'opérateur
bioBidet
bioBidet BB-1000 Document technique
