Binks MX6805PU-SMX Manuel utilisateur

Instruction Manual

Page 1 of 20 Issue: 1.1

Instruction Manual

MX6805PU-SMX Pump

MX6812PU-SMX Pump

MX6833PU-SMX Pump

Instruction Manual

Page 2 of 20 Issue: 1.1

Instruction Manual

Page 3 of 20 Issue: 1.1

Specification

Feature Unit

Flow at 60 cycles/min 1.08 US Gal. /min.

4.08 Litres/min.

Flow per cycle 0.018 US Gallons

0.068 Litres

Recommended intermittent cycle rate 20 cycles/min

Pump Stroke 3”

75 mm

Ratio – MX6805PU-SMX

MX6812PU-SMX

MX6833PU-SMX

5:1

12:1

33:1

Maximum Fluid Pressure 3830 PSI

265 BAR

Fluid Inlet

Fluid Outlet

Ram – Chop Check

½” NPT (f)

Weight – MX6805PU-SMX

MX6812PU-SMX

MX6833PU-SMX

15 KG / 33 Lbs

18 KG / 39.6 Lbs

Rod Upper Packing Seal PTFE + UHMWPE

Rod Lower Packing Seal PTFE + UHMWPE

Air Inlet Ø12 Hose Female

Air Quality ISO 8573.1 Class 3.3.2

Dirt 5 microns

Water -20ºC@7bar (0.1g/m³)

Oil 0.1mg/m³

Instruction Manual

Page 4 of 20 Issue: 1.1

Instruction Manual

Page 5 of 20 Issue: 1.1

Instruction Manual

Page 6 of 20 Issue: 1.1

MX6805PU-SMX Overall Dimensions

Instruction Manual

Page 7 of 20 Issue: 1.1

MX6812PU-SMX Overall Dimensions

Instruction Manual

Page 8 of 20 Issue: 1.1

MX6833PU-SMX Overall Dimensions

Instruction Manual

Page 9 of 20 Issue: 1.1

General Description

The MX68xxPU-SMX fluid paint pump is designed for pumping High Viscosity

materials such as Mastic, PVC, Underseals, Sound deadeners and other similar

materials.

The fluid section is a ‘ROD’ type design which means the rod displaces the

material and is the only wear contact with the packings. A ball check valve system

in the rod and a chop check inlet valve system ensure a precise, smooth volume

output. Tungsten Carbide ball seats ensure maximum operating life between

servicing.

The interior design maintains high flow capacity with minimum pressure drop

ensuring high efficiency; special surface treatments provide a smooth micro

surface making cleaning and flushing easier.

The piston and rod seals are the chevron type, which can be adjusted by means of

a gland nut, should wear occur, a preloaded wave spring is employed to adjust

and maintain the lower chevron packing preload when wear occurs. A built in

Solvent cup cleans and lubricates the pump rod and seals to prolong working life.

The air motor also utilises the Binks quick exhaust technology to prevent air valve

freezing conditions when high cycle speeds are employed.

The air motor is furnished with an exhaust muffler to control air exhaust noise

emission. An adapter kit is also available to facilitate connection to a piped

exhaust system if required.

Installation

This pump should be flushed with a suitable compatible solvent prior to use.

It is recommended that a propriety 1/2" BSP Filter / Regulator is used to provide

final control of the compressed air to the air motor.

Mount the pump securely and position the pump at a convenient height to allow

for maintenance, visual observation, and periodic inspection.

The Pump Assembly must be connected to a suitable earth ground to ensure that

there is no possibility of static build up.

Attach suitable pipework or flexible hoses designed to meet the working pressure

of the pump assembly (dependent on pump ratio) to the outlet connection, e.g. ½”

Outlet.

Set the pump speed to a slow cycle rate and start the pump to remove any air

from the fluid circuit. Inspect for any air or fluid leaks.

Instruction Manual

Page 10 of 20 Issue: 1.1

MX6805PU-SMX Pump Assembly

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Binks Pompe à eau

Binks

Binks 818830 Manuel utilisateur

Binks

Binks DX70 Manuel utilisateur

Binks

Binks GEMINI II Series Manuel de la liste des pièces

Binks

Binks DX200AR Manuel utilisateur

Binks

Binks DX200SR Manuel utilisateur

Binks

Binks MX432 Manuel utilisateur

Binks

Binks HP 4/20 Feuille d'instructions

Binks

Binks MX412UCA Manuel utilisateur

Binks

Binks MX432 Manuel utilisateur

Binks

Binks Maple 7/7 Manuel utilisateur

Binks

Binks HP 4/32 Manuel utilisateur

Binks

Binks FX12PL Manuel utilisateur

Binks

Binks MX432 Manuel utilisateur

Binks

Binks Gemini II 41-818810 Manuel de la liste des pièces

Binks

Binks E2-30 Manuel utilisateur

Binks

Binks 81882 Series Manuel utilisateur

Binks

Binks DX70 Manuel utilisateur

Binks

Binks Maple 7/15 10 40 41 Manuel utilisateur

Binks

Binks DX200-3 Manuel utilisateur

Binks

Binks DX200 Manuel utilisateur

Binks

Binks MX412 Manuel utilisateur

Binks

Binks E2-7 Manuel utilisateur

Binks

Binks 10 Manuel utilisateur

Binks

Binks 41-38045 Manuel utilisateur

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur