Binatone Trend 3 Executive Manuel utilisateur

TREND 3 EXECUTIVE

Corded Telephone

Unpackingyourphone

In the box you will find:

• Base Unit

• Handset

• Coiled Handset cord

• Telephone line cord

for Base unit

• User manual

Keep the packing materials

in a safe place in case you

later need to transport the

unit.

Keep your sales (till)

receipt, which is your

guarantee.

Important note---backup batteries

The Trend 3 Executive requires 2 x 1.5V AAA size Alkaline batteries

installed into the battery compartment before use.

Warning: The caller display will not work without batteries installed.

CHECKBACK

DEL

Tel No

new

3 Executive

1. LCD Screen

2. Scroll Up& Down buttons

3. Call Backbutton

4. Delete button

5. Check button

6. Store button

7. Secrecy button

8. One-Touch Memory button

9. Pause button

10.R(Recall) button

11.Battery Compartment

12.Telephone Line Socket

13.Ringer Volume Switch

1. Where to find it

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

14.LNR(Last Number Redial) button

1.Locating the Base unit

The Base unit should be placed on a level surface, in a position where:

the telephone line cable will reach your telephone line socket or

extension socket.

it is not close to a sink, bath or shower, or anywhere else where it

might get wet.

it is not close to other electrical equipment - fridges, washing

machines, microwave ovens, TVs, fluorescent lights, etc.

2. Plug the coiled handset

cord into the Handset.

Plug the other end into

the jack on the left

side of the Base unit.

3. Place the Handset in

the Base unit.

4.Plug the telephone line cord

free end into a modular wall jack.

Press the cable into the groove

so that the Base unit stands level.

5. Lift the Handset and check for

Dial tone in the earpiece.

Always use the

telephone line

cord supplied

with your Trend 3

Executive phone.

Other telephone

line cords may

not work.

make sure the

plugs click

into place.

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

2. Installation

Installing (or Replacing) the Battery

IMPORTANT

- Before removing the

battery compartment cover, always

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

Use a screwdriver to remove the screw



in the battery compartment cover on the

top of the base unit.

Install 2 pcs of Alkaline AAA batteries



into the battery compartment and place

back the cover before use.

Note: 1) Please do NOT use Rechargeable

batteries in this phone.

2) The Caller display will not work

without batteries fitted.

l2jmivvv vFE;FCH? <;NN?LC?M

w;NN?LS =IGJ;LNG?HN =IP?L

3=L?Q >LCP?L NI IJ?H

<;NN?LS >IIL

4?F?JBIH?

HOG<?L =;L>

06xJF;N?

make sure the base unit is

disconnected from the telephone line.

Wall mount

To place the Trend 3 Executive phone on a wall,

mark two points on the wall that are 130 mm

apart to lay the fixing centers as shown below.

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

Slide-back in

3. Wall mount installation

IMPORTANT

Before you wall mount, please check that:

you are not drilling into any hidden wiring

the telephone line cord will reach the

telephone socket

Fix two screws at the marketed locations, leaving

approximately 7mm between the wall and

the screw head. Hang the cradle unit on the

screws using the wall mount slots. You may need

to remove the telephone from the wall and

tighten the screws so that the cradle is securely

fixed and does not wobble. Place the Handset on

the cradle with the packing hook on the cradle

arranged to fit in the parking recess under the

earpiece on the Handset.

130 mm

Set Time/Date

1In standby mode, press MENU button.

ÖThe display shows ' SET 1 DATE '.

2Press MENU button to confirm.

ÖThe 'year' icon will be blinking.

3Press UP or DOWN button to set the year.

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

4. Setting up your phone

Press the MENU button to enter the menu and

then use UP or DOWN buttons to cycle through

the following options:

SET 1 DATE

SET 2 LCD

SET 3 FLASH

Note: The system will time out if you leave more

than 8 seconds between key presses.

You will need to set the correct time and date

so they can be displayed correctly on the display.

If you subscribe to a Caller Display service, the

time and date will be set automatically on receipt

of your first incoming call.

4Press MENU button to confirm.

ÖThe 'month' icon will be blinking.

5Press UP or DOWN button to set the month.

6Press MENU button to confirm.

ÖThe 'date' icon will be blinking.

7Press UP or DOWN button to set the date.

8Press MENU button to confirm.

ÖThe 'hour' icon will be blinking.

9Press UP or DOWN button to set the hour.

ÖWhen setting the 'hour', the 'AM' or 'PM' icon

will automatically turn on to correspond the

hour time.

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

10 Press MENU button to confirm.

ÖThe 'minute' icon will be blinking.

Press UP or DOWN button to set the minute.

Press MENU button to confirm the setting.

ÖThe display shows ' SET 2 LCD ' , you can

continue with programming, or press DELETE

button to return to standby mode.

Set LCD 1In standby mode, press MENU button.

ÖThe display shows ' SET 1 DATE '.

2Press UP or DOWN button until the display

3Press MENU to confirm.

4Press UP or DOWN button to select your

Press MENU button to confirm the setting.

ÖThe display shows ' SET 2 LCD ' , you can

continue with programming, or press DELETE

button to return to standby mode.

Contrast

shows 'SET 2 LCD'.

comfortable display viewing level (1~8).

The default setting is 3.

Set Flash

1In standby mode, press MENU button.

ÖThe display shows ' SET 1 DATE '.

2Press UP or DOWN button until the display

3Press MENU to confirm.

4Press UP or DOWN button to select 100 (default),

Time

shows 'SET 3 FLASH'.

300, 600, or 1000.

This telephone gives you the possibility to

use the special services of your network provider.

When pressing the RECALL button, the phone

generates a line interruption and the length

depends on your Flash Time setting.

DEL

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

Making a 1Lift the Handset, listen for a dial tone.

ÖThe display shows ' 00-00 '.

2Dial the telephone number you wish to call.

3To end the call, return the Handset to the Base

call

Press MENU button to confirm the setting.

ÖThe display shows ' SET 1 DATE ' , you can

continue with programming, or press DELETE

button to return to standby mode.

5. Telephone Operations

ÖThe display shows the number as you dial

(maximum of 14 digits will be shown).

unit.

Receiving a 1When the phone rings, the ringer indictor flashes

2Pick up the Handset to answer the call.

3To end the call, return the Handset to the Base

call

ÖThe call timer starts about 7 seconds after

going on line.

unit cradle.

and the incoming phone number will be shown

on the display.

Last Number 1Lift the Handset.

2Press LNR button.

Redial

ÖThe phone automatically dials the last

number you called (maximum of 32 digits).

DEL

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

Mute 1During a call press SECRECY button.

Function

ÖWhen the mouthpiece is muted, the person

at the other end of the call cannot hear you

but you can hear his side.

2To get back to the call, release SECRECY

button again.

Inserting a

Pressing PAUSE button immediately after the

Pause in

For some switchboard system, an access number

must be dialed (usually an 8 or 9) to get another

dial tone and an outside line.

the dialing

sequence

access number, a pause of about 3.6 seconds

will be entered, and the desired number can be

dialed immediately.

Press PAUSE button to insert a pause when

dialing or storing Long Distance Access Codes.

Use on PBX

Press R (RECALL) button on your Trend 3

If you are using your Trend 3 Executive phone

on a PBX, and the PBX user guide tells you to

press RECALL;

Executive phone.

Making a call

1In waiting mode, press CHECK button.

from the

ÖThe most recent outgoing call number and

duration will be displayed.

2Press CHECK repeatedly to find the record you

wish to call.

The telephone remembers the last 5 outgoing calls.

outgoing call

records

Press BACK button to auto-redial.

CHECK

BACK

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

Deleting an

1In waiting mode, press CHECK button.

outgoing call ÖThe most recent outgoing call number and

duration will be displayed.

2Press CHECK repeatedly to find the record you

wish to delete.

record

3Press DELETE button.

ÖThe display shows the next record.

4Press and hold DELETE button 3 seconds will

delete all outgoing call records.

Storing a 1Lift up Handset, press STORE button.

Number in

ÖThe largest length cannot exceed 14 digits

and if exceed, the memory will not store the

2Press M1 button and then telephone number,

up to 14 digits.

a One-Touch

memory

correct number.

Dial out

Stored ÖThe number dials automatically.

1Lift up Handset, press M1 button.

number

VERY IMPORTANT:

To use Caller Display you must first subscribe to your network provider's Caller

Diaply service.

If you subscribe to a Caller Display service, you can see the phone number of

the person calling you before you answer. The caller display information includes:

The caller's number

The date and time of the call

6. Caller Display Operation

CHECK

DEL

3Press STORE button to confirm the storing

number.

Table des matières

Autres manuels Binatone Téléphone

Binatone

Binatone iDECT L1i System Manuel utilisateur

Binatone

Binatone SPEAKEASY 5 Manuel utilisateur

Binatone

Binatone Speakeasy Combo 3865 Triple Manuel utilisateur

Binatone

Binatone Speakeasy 17 Manuel utilisateur

Binatone

Binatone 433 Manuel utilisateur

Binatone

Binatone Reliant 510 Manuel utilisateur

Binatone

Binatone Oval Twin XD1220 Manuel utilisateur

Binatone

Binatone ACTIVE XA2020 Manuel utilisateur

Binatone

Binatone iDECT M3i Manuel utilisateur

Binatone

Binatone Acura 3000 Manuel utilisateur

Binatone

Binatone LYRIS 410 Manuel utilisateur

Binatone

Binatone 5502 Manuel utilisateur

Binatone

Binatone Speakeasy 6 Manuel utilisateur

Binatone

Binatone IDECT X3I SYSTEM Manuel utilisateur

Binatone

Binatone CAPRICE 500 Manuel utilisateur

Binatone

Binatone iDECT Freedom Twin Manuel utilisateur

Binatone

Binatone AC2000 Manuel utilisateur

Binatone

Binatone LYRIS 310 Manuel utilisateur

Binatone

Binatone SPIRIT 221 Manuel utilisateur

Binatone

Binatone DECT Solo Single Manuel utilisateur

Binatone

Binatone Speakeasy Combo 3410 Manuel utilisateur

Binatone

Binatone Trend 0119 Manuel utilisateur

Binatone

Binatone Pegasys 8 Triple Manuel utilisateur

Binatone

Binatone Smart 66 Manuel utilisateur

Manuels Téléphone populaires d'autres marques

GE 2-9480 Manuel utilisateur

Geemarc

Geemarc PHOTOPHONE 155 Manuel utilisateur

D-Link

D-Link DWR-720/PW Manuel utilisateur

Interquartz

Interquartz Gemini IQ333 Manuel utilisateur

SSS Siedle

SSS Siedle HT 840-0 Manuel utilisateur

Motorola

Motorola TITANIUM Manuel utilisateur

Panasonic

Panasonic ICX Manuel utilisateur

LG H870DS Manuel utilisateur

Samsung

Samsung GT-I9500 Manuel utilisateur

AT&T

AT&T Trimline 205 Manuel utilisateur

Selta

Selta zenyth 600 Manuel utilisateur

Doro

Doro AFTI 20 Manuel utilisateur

UNIQCELL

UNIQCELL A1 Manuel utilisateur

Panasonic

Panasonic KX Series Manuel utilisateur

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuel utilisateur

BT Decor 425 Manuel utilisateur

NEC

NEC SV8500 Manuel utilisateur

Teledex

Teledex PEARL Manuel utilisateur