BIGSTONE C500B Manuel utilisateur

i de the li de www.RideTheGlide.ca

C500B Instructions

www.bigstone-nj.com

i de the li de www.RideTheGlide.ca

Contents

Introduction           3

NoteaboutWarranty        3

TheDisplay           3

TheButtons           4

TheDisplay           4

NormalView          5

Operation           5

On/O5

 SpeedDisplay         6

 RidingMode          6

Current6

 PedalAssistLevel         7

 Odometer,Trip,Time        7

 BatteryIndicator         8

 6km/hWalkAssist        8

Settings            9

 SET0:RidingMode        9

 SET1:TripReset         9

 SET2:MaxSpeedLimit       9

 SET3:WheelDiameter       9

 SET4:SpeedUnits        9

USBCharging          10

ErrorCodes           10

i de the li de www.RideTheGlide.ca

Introduction

NoteaboutWarranty

TheDisplay

For starters, thanks for your purchase and for choosing Ride the

Glide! No doubt you’re very excited to get out and riding right away,

who wouldn’t! But please rst take a moment to read through this

instruction manual to learn the ins and outs of this display, how to

operate it and allay any confusion.

If you ever have any issues with your e-bike, whether mechanical or

electrical please contact us immediately and without delay. Warran-

ty can be voided by not disclosing an issue and not having it xed

in a timely manner. And remember your bike is only as good as the

shape you keep it in so please make use of your rst year of free

tune ups.

The C500B display is made of black ABS plastic and the bracket is a

nylon plastic. The normal operating temperature range is -20 to 60°C

Dimensions in mm

i de the li de www.RideTheGlide.ca

TheButtons

TheDisplay

The C500B has four buttons including ON/OFF, SET, UP and DOWN.

The C500B has wide range of functions and indicators. The diagram

below shows the full contents of the display

i de the li de www.RideTheGlide.ca

Normal View

Operation

On/O

With the display on the default display is the speed, odometer (trip

and time), pedal assist level (default to zero or one depending on

model), mode indicator (eco, normal or power), current level and

battery level.

Press the ON/OFF button to start the display, this will provide power

to the controller and turn on the bike. Pressing the ON/OFF button

with the display on will turn the back light on as well as the front

and rear lights. To turn the display and the bike o hold the ON/OFF

button for 3 seconds until the display powers o. With the display

turned o there is no battery consumption and the display itself

when on draws no more than 2µA (micro amps).

The display panel will automatically turn o if the speed is 0km/h for

ve minutes.

i de the li de www.RideTheGlide.ca

Speed Display

Riding Mode

Current

The speed displays in the top right corner, the default reading is in

km/h but can be changed to mph in the settings.

There are three riding modes available, eco, normal and power,

which regulate the amount of available power. Eco will regulate up

to 6A, normal at 10A and power up the maximum of 12A. The default

is normal and can be changed in settings.

This gives a visual representation of the discharging current of the

battery. Each mark is 2A, all six marks is equal to 12A.

i de the li de www.RideTheGlide.ca

Pedal Assist Level

This determines the speed and amount of power when pedaling.

Default is 0 or 1 depending on model and can be changed by clicking

the up or down buttons. 0 pedal assist is no pedal assist, but power

is still available with the throttle. For pedal assist 1-5 levels are

available with 1 being the least and 5 being the most.

Odometer, Trip, Time

The odometer, trip odometer and riding time display in the bottom

right of the display. You can switch between each by clicking the set

button.

The odometer is to total distance the bike has been ridden with the

display powered on, this cannot be cleared.

The trip odometer is cumulative up to 500km at which point it will

automatically reset. The trip distance can be manually reset.

The riding time indicates how long the bike has been above zero

speed. This is automatically reset when the display is powered o.

i de the li de www.RideTheGlide.ca

Battery Indicator

Backlight/LightIndicator

6km/hWalkAssist

The battery frame has ve segments, each representing 20%

battery capacity. When the battery is severely depleted the outside

edge of the battery frame will ash, indicating it needs to be charged

immediately.

With the display powered on click the on/o button to turn on the

front and rear lights as well as back light the display. Click it again to

turn the lights o.

Hold the down button for 2 seconds to engage the 6 km/h walk

assist mode, releasing the button will turn the walk assist o.

i de the li de www.RideTheGlide.ca

Settings

Hold the set button for 2 seconds to enter the settings interface. The

lights with ash on and the screen will become back light. Use the

set button to cycle between settings and use the up and down

buttons to select the desired parameter. Hold set for 1 second to

save and exit the settings interface.

SET 0: Riding Mode

SET 1: Trip Reset

SET 2: Max Speed Limit

SET3:WheelDiameter

SET 4: Speed Units

Select the desired riding mode, eco, normal or power.

Click the down button to reset the trip distance.

The max speed is set by default to 32 km/h to comply with local laws

but can be adjusted from 20 km/h to 99.9km/h (no speed restriction)

Select the suitable value to ensure accurate display of speed and

mileage. *Correctly set from factory, no need to change.

Select either mph or km/h depending on your preference. Default is

km/h.

i de the li de www.RideTheGlide.ca

USBCharging

Error Codes

There is a USB charge port below the display that allows you to

charge a mobile phone or other device. In order to turn on USB

charging press and hold the set and up buttons for 2 seconds. The

USB icon, as shown below, will turn on. Repeat to disable this

feature.

If a fault is detected within the electronic control system, the display

will ash and show an error code. Reference the table below for

code details. If your display shows an error immediately contact

Ride the Glide about the error code and set up an appointment to

bring your bike in to have it looked at.

Error Code Description

1 Current error or MOS damaged

2 Throttle error (start detection)

3 Motor no phase position

4 Hall error

5 Brake error (start detection)

6 Under voltage

7 Motor stalling

8 Controller receiving error

9 Display receiving error

Table des matières

Autres manuels BIGSTONE Moniteur

BIGSTONE

BIGSTONE C500B-LCD Manuel utilisateur

BIGSTONE

BIGSTONE C600E-USB-LCD Manuel utilisateur

BIGSTONE

BIGSTONE C300-LCD Manuel utilisateur

BIGSTONE

BIGSTONE C200-LCD Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation