BigRoad DASHLINK DL-200 Manuel utilisateur
DASHLINK DL-200
Installation Guide
CONTACT
P: 1.888.305.8777 Ext. 1
CONTENTS
Required Materials 01
Adding A New Truck 02
Installing Your DashLink 03
Link Your Vehicle To DashLink 06
What To Keep In Your Cab 09
Troubleshooting 10
Resources 12
Electronic Logging Device (ELD)
DL-200
DashLink DL-200 ― Installation Guide
^ iPhone 9.3 or higher with
BigRoad Mobile App installed
01.
Required
Materials
12
3
^Android 5.0 or higher with
BigRoad Mobile App installed
DASHLINK DL-200
1
ADAPTER CABLE
COMPATIBLE MOBILE DEVICE
2
3
With correct pin conguration for
your vehicle. See the Ordering Your
DashLink ELD guide for assistance
selecting the correct cable.
CABLE TIES, TAPE, OR VELCRO
(OPTIONAL)
4
What Do You Need to
Get Started?
DL-200
Device ID: 2471-89A8-C114
DashLink DL-200 ― Installation Guide
Trucks can only be added to a eet through the BigRoad Web App by
the Safety Manager. We no longer allow trucks to be added through the
BigRoad Mobile App.
02.
Adding A
New Truck 1
2
Follow these steps to add a
new truck.
LOGIN TO THE BIGROAD WEB APP AS A SAFETY MANAGER
CLICK ON THE FLEET TAB
SELECT TRUCKS
SELECT ADD A TRUCK
ENTER THE TRUCK NUMBER
This can be a maximum of 10 characters and cannot contain
spaces or commas.
ENTER THE LICENSE PLATE NUMBER
ENTER THE VIN NUMBER
BigRoad will verify that the VIN number is the required 17
characters long.
SELECT THE TYPE OF TRUCK YOU WISH TO ADD:
ELECTRONIC LOG, AOBRD OR ELD
Once a truck has been added as ELD it cannot be switched to
Electronic Log or AOBRD.
SELECT PAIRING OPTION (VIN OR DEVICE ID)
If you select device ID, you must enter the DashLink number into
the box below.
CLICK ADD TRUCK
3
4
5
6
7
8
9
10
DashLink DL-200 ― Installation Guide
CONNECT THE ADAPTER CABLE TO THE DASHLINK DEVICE
Plug the connector on the adapter cable into the DashLink device.
Rotate the plastic screws on both sides of the adapter cable to tighten.
03.
Installing Your
DashLink
1
2
Follow these steps to install
DashLink in your vehicle.
LOCATE THE DIAGNOSTIC PORT IN YOUR VEHICLE
Look in your cab under the dashboard to the left or right of the steering
column OR to the left of the driver’s seat.
DL-200
Device ID: 2471-89A8-C114
DashLink DL-200 ― Installation Guide
3
4
Installing Your
DashLink
CONNECT THE ADAPTER CABLE TO THE DIAGNOSTIC PORT
FOR 9-PIN OR 6-PIN CABLES
Rotate the collar to align the collar tabs with the matching slot on the
diagnostic port. Press rmly until the cable is fully connected. Rotate the
collar clockwise until it clicks.
FOR OBD STYLE CABLES
Insert the connector and ensure it is fully inserted.
ATTACH THE DASHLINK DEVICE TO YOUR VEHICLE
Mount your DashLink in a place where it won’t obstruct your view or ability
to drive safely. Avoid putting your DashLink within 2 inches of any metal
fairings to prevent interference with the GPS signal. If you do have to put it
near a metal fairing, make sure the sticker side faces away from it.
DashLink DL-200 ― Installation Guide
TIDY THE INSTALLATION
Tie up any loose or dangling cords using ties to make sure they don’t
interfere with anything while you’re driving.
Installing Your
DashLink
5
DashLink DL-200 ― Installation Guide
Cancel
Sign Out
Switch Truck
Settings
S
witch Truc
k
1
MAKE SURE YOUR VEHICLE IS
SELECTED
Select the truck you want to
connect to DashLink.
Note that DashLink equipped
vehicles will show a DashLink
icon beside them.
04.
Link Your Vehicle
To DashLink
2
Follow these steps to connect
your DashLink and mobile
device to your vehicle.
Note: If your vehicle has not been added to
the BigRoad Mobile App, ask your carrier to
add your truck. They must do this through
Fleet tab in the BigRoad Web App.
MENU
i
LAUNCH THE BIGROAD MOBILE
APP ON YOUR DEVICE
Click on the BigRoad Mobile App
icon to launch the app. Enter your
email and password to sign in.
Sign In
Forgot your password?
Password
Email
S
ign In
DashLink DL-200 ― Installation Guide
Link Your Vehicle
To DashLink
3ONCE A MATCHING VIN OR DEVICE ID IS FOUND, THE APP AND THE
HARDWARE WILL CONNECT
VERIFY THE DASHLINK CONNECTION IS CORRECTLY ESTABLISHED
(MAY TAKE UP TO 120 SECONDS IN SOME CASES)
Before a connection is established,
the DashLink icon will show a
question mark (?).
It will say: DashLink is connecting –
please wait
Once the connection is established,
the DashLink icon will change to the
Wi-Fi logo.
It will say: DashLink is successfully
connected
4
DashLink DL-200 ― Installation Guide
DL-200
Device ID: 2471-89A8-C114
Link Your Vehicle
To DashLink
MAKE SURE THE GREEN GPS LED ON THE DASHLINK DEVICE IS SOLID,
NOT FLASHING
This indicates that the device has found a GPS signal. If the LED is
ashing, it means the GPS signal hasn’t been found yet.
NOTE: In some cases, it may take up to 2 minutes for the LED light to become solid
after it’s connected to the vehicle.
5
>Solid green light
DashLink DL-200 ― Installation Guide
05.
What To Keep
In Your Cab
Driver Card
1 2 Paper Logbook
1
2
DASHLINK DRIVER CARD
If you’re pulled over for an inspection, you’ll be asked to provide this card.
If you’ve lost your laminated card or require an extra, visit
www.bigroad.com/driver-card and download the AOBRD Driver Card.
PAPER LOGBOOK
You are required to have a paper logbook with at least 14 days of blank
forms in your vehicle.
Table des matières
