BigBlue POWER.PAIR.PLAY Manuel utilisateur
1
Table of conTenTs
Warnings and Cautions ................................2
FCC Information ......................................6
Location of Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . .8
Set Up................................................9
Pairing Your Device....................................9
Using Big Blue after Pairing. . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adjusting Volume.....................................11
Adjusting Bass and Treble. . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
LED Ring On/Off ....................................11
Connecting Other Stereo Components . . . . . . . . . . . . . . . . 12
Outputting Sound ................................... 12
Specifications.......................................13
Troubleshooting .....................................14
Warranty.............................................17
2
caUTIon
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER.
THERE ARE NO SERVICEABLE PARTS INSIDE.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
The lightning flash with arrow-head symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the unit’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the unit.
IMPoRTanT safeTY InsTRUcTIons
All of the safety and operating instructions should be read,
adhered to and followed before the unit is operated.
safeTY and HandlIng InfoRMaTIon
For maximum product life, do not drop, throw, or crush the
speaker. Do not expose it to humidity, dust, or operating
temperatures outside 32°F to 113°F (0°C to 45°C).
save THese InsTRUcTIons!
dangeR
To reduce the risk of electric shock, burns, fire or injury:
1. Do not use while bathing or in a shower.
2. Do not place or store unit where it can fall or be pulled
into a tub or sink.
3. Do not place in, drop or submerge in water or
other liquid.
4. Do not reach for a unit that has fallen into water.
Unplug it immediately.
5. Care should be taken so that objects do not fall and
liquids are not spilled onto the unit.
3
WaRnIng
1. Close supervision is necessary when this appliance/
product is used by or near children or mentally
disabled individuals.
2. Use this unit only for its intended use as described in
this manual.
3. Unplug this unit during lightning storms or when unused
for long periods of time.
4. Never drop or insert an object into any opening.
5. Protect the power cord from being walked on or pinched,
particularly at plug outlets, convenience receptacles and
the point where it exits the unit.
6. Do not allow cord to touch hot surfaces. Wrap cord loosely
around the unit when storing.
7. The unit should be situated away from direct sunlight
or heat sources such as radiators, electric heaters, heat
registers, stoves, or other units (including amplifiers) that
produce heat. Avoid placing on top of stereo equipment
that radiates heat.
4
5
8. Never block the air openings of the unit with materials such
as clothing, plastic bags or papers, or place it on a soft
surface such as a bed or couch, where the air openings
may be blocked.
9. Do not overload the electrical outlet. Use only the power
source as indicated.
10. Do not carry this unit by its cord or use the cord
as a handle.
11. Never operate this unit if it has a damaged cord or plug,
if it is not working properly, or if it has been dropped or
damaged, or dropped into water. If the unit’s power supply
cord or plug is damaged, do not attempt to fix it yourself.
12. To avoid the risk of electric shock, do not disassemble or
attempt to repair the unit. Incorrect repair can cause risk of
electric shock or injury to persons when the unit is used.
13. Do not operate in the presence of explosive and/or
flammable fumes.
14. Never remove the plug from the outlet by pulling the
power cord.
6
fcc InfoRMaTIon
This equipment has been tested and found to comply with
the limits for a Class B Digital Device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This equipment may not cause harmful interference.
2. This equipment must accept any interference received,
including interference that may cause undesired operation.
Modifications not authorized by the manufacturer may void the
user’s authority to operate this device.
7
8
locaTIon of PaRTs and conTRols
1. Power Button
2. LED Ring
3. Volume Up
4. LED Ring On/Off
5. AUX In Port
6. AUX Out Port
7. Power Port
8. Power Adapter
9. Treble Knob
10. Bass Knob
11. Speaker Grille
12. Volume Down
12 1 3
7
4
5
6
11
8
9
10
2
9
seT UP
1. Connect the ADAPTER’S jack to the POWER PORT on
the back of Big Blue.
2. Plug the ADAPTER into an electrical outlet.
PaIRIng YoUR devIce
1. Prepare your device to pair using Bluetooth®, making sure
you are within 33 feet of Big Blue. Refer to your device’s
owners manual for details if necessary.
2. If Big Blue is off, press and hold the POWER BUTTON
until the LED RING starts flashing. Four ascending beeps
will sound. If Big Blue is already on, press and hold the
POWER BUTTON until the LED RING starts flashing.
3. Big Blue is in pairing mode when the LED RING is
flashing. Big Blue will wait for a connection in pairing
mode for up to 3 minutes.
4. Once Big Blue is in pairing mode and your device is ready
to pair, select “Big Blue”. If prompted, use 0000 as a PIN
for the pairing code.
5. Once Big Blue is selected, the LED RING will change to
solid blue and 3 beeps will sound to confirm pairing is
complete. Big Blue is now ready to rock!
Table des matières
Autres manuels BigBlue Intervenants
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur