BGS technic 9689 Manuel utilisateur

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

BGS 9689

Timing Chain Test Tool Set

for VAG 1.2 / 1.4 TFSi

TOOLS

Timing Chain Test Tool Set, to be used as OEM T10550, consisting of the following tools:

1 Camshaft retainer, to be used as OEM T10550/1

2 Pointer, to be used as OEM T10550/2

3 Measuring gauge with crankshaft pulley plate, to be used as OEM T10550/3

INTENDED USE

This tool set is made to check timing chains on VAG 1.2 and 1.4L TFSi engines.

More information regarding this item and a list of suitable engines and models can be found on our

website: www.bgstechnic.com

SAFETY INFORMATION

•Do not use the tool if parts are missing or damaged.

•Use the tool for the intended purpose only.

•Never place the tool on the vehicle battery. There is a risk of a short circuit.

•Be careful when working with the engine running. Loose clothing, tools and other objects can

be caught by rotating parts and cause serious injury.

•Keep children and other unauthorized persons away from the work area.

•Be careful when working on hot engines because of the risk of burn injuries.

•If you remove the ignition key before repairing, you can prevent the engine from being started

accidentally and resulting in engine damage.

•This manual serves as a brief guide and does not replace a workshop manual. Always refer to

the vehicle-specific service literature, particularly the technical data such as torque values and

instructions for disassembly/assembly, etc.

•After repair or before starting the engine, turn a minimum of 2 turns by hand and check the

timing again.

•Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

USE

When checking the timing chain, the engine oil temperature must be at least 40°C.

Disassemble all required components for this test (see workshop manual).

Remove screws from both camshaft covers.

Remove both camshaft covers from the cylinder head.

The bore in the exhaust camshaft must be in the position shown

(B).

Insert camshaft retainer (9689-1) into camshaft openings until

stop.

Insert the locking pin (A) into the bore (B) of the exhaust

camshaft.

Tighten the camshaft retainer (9689-1) with original camshaft

cover bolts by hand.

Place the pointer (9689-2), vertically aligned and pointing

upwards, into the hole in the oil pan.

Mount the measuring gauge with crankshaft pulley plate (9689-3).

Fit the torque wrench on the crankshaft bolt with the appropriate socket wrench.

Turn the crankshaft clockwise and keep it pressed to 40 Nm.

Adjust the measuring gauge (9689-3) until the »0« points to the pointer (9689-2).

Switch torque wrench to reverse direction and slowly press counterclockwise with 40 Nm.

Read the displayed value on the scale and compare it with the workshop manual.

If a timing chain jump occurs during the test, replace the timing chain.

9689-1

9689-2

9689-3

Table des matières

Autres manuels BGS technic Outils

BGS technic

BGS technic 3380 Manuel utilisateur

BGS technic

BGS technic 3203 Manuel utilisateur

BGS technic

BGS technic 9414 Manuel utilisateur

BGS technic

BGS technic 6679 Manuel utilisateur

BGS technic

BGS technic 62636 Manuel utilisateur

BGS technic

BGS technic 1833 Manuel utilisateur

BGS technic

BGS technic 72098 Manuel utilisateur

BGS technic

BGS technic 9690 Manuel utilisateur

BGS technic

BGS technic 1688 Manuel technique

BGS technic

BGS technic BGS 8540 Manuel utilisateur

BGS technic

BGS technic 8951 Manuel utilisateur

BGS technic

BGS technic 8882 Manuel utilisateur

BGS technic

BGS technic 85865 Manuel utilisateur

BGS technic

BGS technic 8776 Manuel utilisateur

BGS technic

BGS technic 9498 Manuel utilisateur

BGS technic

BGS technic 66205 Manuel utilisateur

BGS technic

BGS technic 9387 Manuel utilisateur

BGS technic

BGS technic BGS 8699 Manuel utilisateur

BGS technic

BGS technic 66526 Manuel utilisateur

BGS technic

BGS technic 8349 Manuel utilisateur

BGS technic

BGS technic 8716 Manuel utilisateur

BGS technic

BGS technic 8766 Manuel utilisateur

BGS technic

BGS technic 8729 Manuel utilisateur

BGS technic

BGS technic 8723 Manuel utilisateur

Manuels Outils populaires d'autres marques

Martor

Martor SECUNORM 175 Manuel utilisateur

ERKCO

ERKCO 1000 Manuel utilisateur

jbc

jbc N4473 Manuel utilisateur

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuel utilisateur

Worx Professional

Worx Professional Sonicrafter WU676 Manuel utilisateur

Gage Bilt

Gage Bilt GB713SH Manuel utilisateur

Hilti

Hilti DX 9-ENP Manuel utilisateur

norbar

norbar NORTRONIC 34399 Manuel utilisateur

Makita

Makita DHR241 Manuel utilisateur

Motor Guard

Motor Guard JMB-1250 Manuel utilisateur

Power Adhesives

Power Adhesives 805-12 Manuel utilisateur

Clemco

Clemco 24189 Manuel utilisateur

VVG

VVG VNG 903 Series Manuel utilisateur

Hilti

Hilti FX 3-A Manuel utilisateur

Grizzly

Grizzly H6472 Manuel utilisateur

axing

axing BWZ 5-02 Manuel utilisateur

Dh-Robotics

Dh-Robotics RGI-100 Comment utiliser

Goobay

Goobay 97790 Manuel utilisateur