Electrical
The electrical system including the motor wheel , controller , baery , display
etc have already be set to the frame. Please make sure the baery is sufficient
before use. All informaon will be showed on LCD Display.Such like the current
speed, ODM, speed gear baery level etc .
Brakes
Please make sure the brakes are in good condion before riding . If the brakes
require any adjuson ,please contact us or find professional person to handle
them.
Tires/Wheels
Before driving, check that the res have sufficient tension, if not, please use an
air pump on tension . Recommended re pressure is 4 bar, this applies to the
front and rear res.
NOTE: Too low re pressure affects the driving characteriscs negavely, gives
increased re wear and reduces the range.
Suspension
All bicycles are with front suspension and also have suspension locks. Please
choose whether or not suspension are needed on the appropriate road.
Baery
We have different baery capacity for selecon. The larger the baery, the
longer range it will be. We recommend that customers choose the appropriate
baery capacity according to their own condions.Recharge the baery every
two weeks on (regular charging and discharging can extend the life of the
baery extend).Always use the origial charger other chargers may damage the
baery .
Charger
1.Connect the plug of the charger with a socket of 110-220V.
2.While the bike is charging, the charger light is on red.
3.The light of the charger green when the bike is almost complete is charged.
Aer the light turns green we advise to connue for 1 to 1.5 hours to recharge
the baery full load.
4.Remove the plug from charging socket and disconnect the plug from the
charging port , then close the charging port on cover.
2
4
