Betts Industries Inc. ▪814·723·1250 ▪1800 Pennsylvania Ave. West ▪Warren, PA 16365 ▪www.BettsInd.com
Print Date: 6/20/2022 This form is considered uncontrolled 24 hrs. after print date.
1.0 General Maintenance Manual Guidelines
1.1 It is strongly recommended that this entire manual be read prior to any operation, disassembly, or
assembly of this equipment.
1.2 Betts Industries, Inc. provides this manual as a guideline for reference only and assumes no
responsibility for personal injury or property damage that may occur in conjunction with this manual.
Betts Industries, Inc. cannot be held responsible for incorrect installation, operation or maintenance
ofthis equipment. Use onlygenuine Bettsreplacementparts. Substituteparts willvoidall warranties
and could impair the proper function making this equipment unsafe.
1.3 Betts Industries, Inc. recommends all equipment be placed on a regular maintenance schedule that
includes the routine replacement of seals and gaskets and visual inspection for leaks and corrosion.
The end user must make their own determination and set their own schedule based upon use and
environment. In some cases, regulations may dictate the minimum testing frequencyof items. Make
sure operators are aware of all applicable codes.
1.4 Only trained and qualified personnel should perform maintenance on this equipment.
1.5 As with any maintenance work, proper safety gear must be utilized and approved procedures must
be followed at all times. Examples of safety gear may include but are not limited to gloves, safety
goggles, face shields, protective suits and respirators. It is the responsibility of the person/company
working on this equipment to identify the hazardous products that the equipment has been exposed
to and designate specific and appropriate protective gear and safety procedures.
1.6 Safety alert symbols are used to alert operator to potential personal injury hazards. These symbols
are per ANSI Z535.5 and are listed below. Operator MUST obey all instructions that follow a safety
symbol. Alerts will be used to indicate known safety concerns.
A list of hazards may include but are not limited to fall hazards, pressure hazards, loaded springs,
corrosive material, flammable product, pinch points. Additional concerns are possible and should
be identified and avoided by the operator.
1.7 Product Warranty shall be void if equipment is subject to misapplication, misuse, neglect, alteration,
or damage.
1.8 Specific design details described in this document are for reference only and are subject to change
without notice. See Betts Industries, Inc. web page for the most recent revision to this document.
www.bettsind.com
1.9 WARNING: This product can expose you to chemicals including Chromium (hexavalent
compounds), which is known to the State of California to cause cancer and birth defects or other
reproductive harm. For more information go to: www.P65Warnings.ca.gov
1.10 For additional questions or more detailed technical assistance, contact the Betts Industries, Inc.
Customer Service, Sales or Engineering Department at (814) 723-1250.
