Better Health D3961 Manuel utilisateur
Better
For a better way of life
Health
Better
For a better way of life
Health
Better
For a better way of life
Health
Better
For a better way of life
Health
Better For a better way of life
Health
Electronic Foot Massager and
Circulator Instruction manual
D3961
2
ELECTRONIC FOOT MASSAGER AND CIRCULATOR
INSTRUCTION MANUAL
D3961
• Alleviates tired and aching legs
• Choice of settings that can be adjusted to suit your needs
• Includes four electrode pads to target specific areas of pain
• Includes remote control for simple operation
For correct usage, read these instructions carefully and keep in a safe place for future
reference.
Better
For a better way of life
Health
Better
Health
3
Introduction
INTRODUCTION
Poor circulation is an increasingly common problem, which arises when there is limited
blood flow to the legs, hands, heart and rest of the body, either due to a medical condition
or the natural aging process. This decrease in circulation can lead to a cold feeling in the
extremities, tired, aching/ heavy legs and swelling of the feet.
This foot massager uses electrical muscle stimulation (EMS) applied primarily through
two large footpads to stimulate thousands of nerve endings in the soles of the feet to help
improve circulation. The physiological result is that the foot and calf muscles contract
and release, creating a pumping action. This action imitates the body’s natural circulatory
system of the leg such as when you walk. As the calf muscles contract blood is squeezed
into the deep vein of the leg and pushed towards the heart. This action effectively prevents
stasis (the pooling of blood) with a significant increase in venous blood flow. E.M.S is part
of a Transcutaneous Electro-Nerve Stimulation (T.E.N.S) family, which has been sold over
the counter in pharmacies for decades. Additional electrical pads are included with the
device to treat other areas of pain. There is a large body of clinical evidence supporting
T.E.N.S and E.M.S.
MAIN FUNCTIONS
1. Helps improve circulation by stimulating the nerve endings in the soles of your feet, also
helping to relieve fatigue and aches/pains.
2. Helps improve sleep: consistent nerve stimulation has been found to be beneficial to ones
mental and physical health.
3. Far-infrared function: It can release continual heat to warm cold feet and promote better
blood circulation.
4
Safety
SAFETY
For your safe and correct use of this device, it is recommended that you read the following
guides before using it.
The following people must never use the foot massager
• Anyone fitted with a pace maker or automatic implanted cardiac defibrillator (AICD)
• Anyone that is pregnant
• Anyone with deep vein thrombosis (DVT) - to avoid mobilising the clot.
You should never use the massager on the following body parts
• Pregnant - womb/stomach
• Broken or bleeding skin - dress any open wound to ensure electrodes do not come in
contact with the area - to avoid a stinging sensation.
• Tissue bleed (internal/external)
• Epilepsy - do not use the pads on the neck area
• Malignancy
• Eyes, testicles
• Infected tissue (inc cellulites)
CAUTION-Take care during use:
Muscle or ligament sprains/tears - rest first then use a low intensity and/or shorter
duration to avoid over-stimulation.
Devitalised/numb tissue - ensure not to over stimulate the area
Long term immobility or inactivity - use a low intensity and shorter duration to introduce
the muscles and avoid over stimulation/muscle fatigue.
Other important safety precautions
1. Only use this device for the purpose of physical therapy.
2. Only use the accessories supplied with the foot massager.
3. Never expose the device to extreme heat and high temperatures.
4. Do not spill liquid on the device or its accessories, and do not put it in damp areas.
5. Do not overload the electrical outlet.
6. If you are not going to be using the massager for a long time, remove the batteries from
the remote controller. If the device malfunctions, disconnect it from the power source
and contact customer services. Do not attempt to repair the device yourself; as to do so
will invalidate the warranty.
7. Check the batteries in the remote control on a regular basis to ensure that they are
operative.
8. The wall socket should be installed near the equipment and should be easily accessible.
9. Keep the device and the accessories out of the reach of young children.
10. Do not place electrodes on damaged skin.
11. The surface of the far-infrared lights cover is hot. A person who is not sensitive to heat
must pay more attention when using it.
5
Description of parts
Connecting wire
Electrode Pad
Adapter Remote
1
2
1
2
ST
BD
E
K
IMJ
R
O
A
H
C
G
F
L
N
Q
P
6
Description of parts
A/ Power switch
B/ Working Mode button - By pressing this button, you can select the working mode from a
choice of 56. Each press of the mode button can shift it to a new mode.
C/ Function Button (switch between body and sole massage).
D/ Auto program Button - By pressing this button, the massager will automatically cycle
through the working modes.
E/ Time control button - Press “+” to increase the working time, and “-“ to reduce the
working time.
F/ Body/sole massage Intensity control button -
• In “Body” massage mode, press “+” to increase the intensity of the electromagnetic
wave pulse, and “-” to reduce.
• In “Sole” massage mode, press “+” to increase the intensity of the biologic
electromagnetic wave pulse, and “-“ to reduce.
G/ Sole Massage Pads - To place your feet on.
H/ Infrared warming area - The unique infrared warm function can infiltrate the massage
deep into your body.
I/ Red Indicating Light - Light flashes: waiting to start working - Light on constantly: in
working status mode
J/ Green indicating light - On: Automatic transfer mode - Off: Under the settled mode.
K/ Intensity Display (sole) - Displays the intensity.
L/ Intensity Display - Displays the intensity
M/ Time display - Displays the remaining time that you can enjoy the massage for.
N/ The Working Mode Display
O/ Electromagnetic Wave Pulse Intensity Display - When different electromagnetic wave
pulse modes and intensities are selected, the display will be different.
P/ Socket for power input - For connecting the adaptor
Q/ Infrared switch
R/ Socket for the connection of the electrode pads - For connecting the electrode pads
S/ T.E.N.S electrode pads
T/ Remote controller
7
Usage Instructions
USAGE INSTRUCTIONS
You can operate the device directly or by using the remote controller provided.
1. Connect the adaptor to the unit and plug into the mains power supply.
2. Plug the device into the nearest electricity socket and place the device a comfortable
distance from your chair.
3. Put your clean feet (it’s best to take off the socks) on the sole stimulating board, and
make sure that your soles completely touch the stimulating boards.
4. Press the power button to turn on the device.
5. Press the “FUNCTION” button until the “sole” icon is flashing and then press the
“INTENSITY” button on the unit or remote controller to select the desired intensity (“+”
increases the intensity and “-“ reduces the intensity).
6. Press the “TIME” button on the unit or on the remote controller to select the usage time
(5 minutes/ 10 minutes/…/90minutes).
7. Use the “AUTO” button on the unit or the remote controller to select the automatic
program, which will change the electronic pulse mode every one minute. There are 56
electromagnetic wave pulse modes.
8. If you want to select a single biologic electromagnetic wave pulse, press the “MODE”
button to choose the desired mode.
9. The machine will stop operation automatically when the preset time is up.
10. It is advisable to drink 500cc of warm water after using this unit.
11. When this device is not in use, remove the plug from the mains power supply.
8
T.E.N.S Electrode Pads
T.E.N.S ELECTRODE PADS
Four TENS electrode pads are provided. Use these pads to relieve body aches and pains
(for example, to the knee, shoulder, back and arm). You can use the pads either by
themselves or at the same time when using the footpads. The choice is yours.
1. Place the device into the nearest electricity socket and place the device at a comfortable
distance from your chair.
2. Connect the pins on the leads to the wire on each set of body pads.
3. Before use, please ensure that the surface of the skin is free from dirt, oil, sweat, powder
and any wounds.
4. Remove the backing from the electrodes, and place them on the body parts you wish to
treat, targeting the area where you suffer muscular or joint pain. Note; the electrodes
must be used as a pair and there should be at least a 1cm space between them. Below
are illustrated examples of T.E.N.S treatment areas for pain relief.
5. Plug the other end of the lead into the electrode pad socket on the side of the device.
6. Before use, please ensure that the surface of the skin is free from dirt, oil, sweat, powder
and any wounds.
7. Join the electrode pads to the wires, and connect to the device.
9
Maintenance
8. Remove the backing from the electrodes, and place them on the body parts you wish to
treat. Note; the electrodes must be used as a pair and there should be at least a 1cm
space between them.
9. Press the “FUNCTION” button until the “body” LED icon flashes. Then press the body
intensity button to +/- buttons to increase or decrease the intensity level. You should set
the intensity so that you can feel the pulses, but remain comfortable.
10. After use, remove the electrodes from the skin slowly and stick them back onto the
plastic backing.
11. Drink a glass of warm water after the therapy to help detoxification.
INFRARED FUNCTION
To switch on the infrared function, simply press the red infrared button on the left side of
the unit. To switch the infrared function off, just press the infrared button again.
MAINTENANCE
1. Before using the electrodes, make sure that the surface of the skin is free from sweat or
dirt.
2. Place the electrodes on the plastic backing after each use.
3. The electrodes should be removed from the skin slowly to protect the pectin.
4. Periodically rub a few drops of clean water on the electrodes to improve their adhesive
quality. Return the body electrodes to the white hard plastic protectors provided. Do not
immerse the device in water.
5. Clean the footpads with damp, soapy cloth. Do not clean the device or its accessories
with strong detergent.
6. Do not put the device in sunlight, damp areas or expose to high temperatures.
7. Store in a dry, dust free location.
10
F.A.Q
FREQUENTLY ASKED QUESTIONS
1. Should I bathe before using?
Not necessary, but it is a good hygienic habit to wash the feet before use.
2. What level of intensity should I use?
There is no fixed intensity level to follow as each individual has a different level of
electrical resistance. You should adjust the intensity to a level until you feel comfortable.
3. Will I get the best result from the highest intensity?
Not necessarily. Using an intensity that is too high, beyond the body’s acceptance, will
cause muscle fatigue and could aggravate an illness.
4. Why do I need to choose a high intensity?
It may be your feet are too dry; you only need to wash your feet or to apply skin lotion
to soften the skin. Or it may be that your feet or nerves have been damaged (inside
or outside), you only need to strengthen the intensity or place electrodes on the parts
where the feeling is weak.
5. What is the recommended time per session and how many times per day?
It is recommended that you use the unit for 30 mins each time and no more than
6 times every day. The total time one person should use the unit for each day, is a
maximum of 3 hours. It is better to take a 30-min rest before starting another therapy.
6. Can I treat both soles and body at the same time?
Yes, because the same waveforms will be used and there are separate intensity controls
for soles and body.
7. Will I get an electric shock if my feet are wet?
No. Because the electrical current is only AC12v, also the footpads are made of
plastics.
8. Can I bathe immediately after the therapy?
It is advisable to have a 10 to 15 minutes break before showering, as your body
temperature will rise as a result of improved blood circulation.
9. Can I use the device immediately after a meal?
Yes, it will help the detoxification process.
10. Do I need to drink a glass of water after therapy?
Yes, it will help the detoxification process.
11. Is the device safe to use on sprains and torn ligaments?
Do not use the device on sprains during the first 6 weeks. Rest for 2 to 6 weeks before
using the device on sprains. As for torn ligaments, it needs a 6 months rest before
commencement.
12. Why do I feel sleepy when and after use?
This is because both your body and mind are relaxed after the therapy.
13. What should I do if I find the stimulation too strong even at the lowest intensity level?
It may be that your nerves are too sensitive. You only need to reduce the usage time and
frequency.
14. My symptoms seem to have worsened since using the device. Is this normal?
Do not worry. It is quite normal that symptoms such as aches, pains and swelling may
be worse during the initial treatment phase. This may occur if the body has not yet
adjusted to the acceleration of blood circulation and muscle stimulation. Medically
it is called acclimatisation. You only need to reduce the session intensity, treatment
Table des matières
