I signal indicator on your receiver indicates very strong signal and you still have
dropouts in audio, there is possibility your receiver is overloaded. It can cause high
power o wireless transmitter and short distance between transmitter and receiving
antennas. In this case decreasing o antenna gain (even to negative gain) can help
to get much better per ormance o your wireless system.
8. Display settings
Variable display settings are available or possibility to adjust behavior o antenna
display to actual ambient light conditions or speci ic requirements o shooting place.
enter the settings long (2 seconds) press o UP and DOWN buttons at once
change setting short press o UP or DOWN button
save setting i no button is pressed during 3 seconds, display settings stops
to lash and actual value is stored in memory
Available display settings are listed bellow:
b.A automatic display brightness according to ambient light
b.0 display is turned o until one o buttons is pressed, then display
will temporarily turn on or the period o 3 seconds with
automatic brightness settings
b.1 - b.5 manual brightness level set to one o 5 levels (1 is lowest)
When the antenna is turned on, it will automatically recalled lastly saved display
settings.
9. Recommended accessories
Optional accessories include various cables or the connection o the antenna
output signal and input power supply and special threaded variable angle antenna
mounting adaptor.
For the latest in ormations about our products BETSO please contact your local
distributor or visit our website http://www.betso.eu.
© Copyright BETSO ELECTRONICS Ltd. 6