BESTEK PPC-x86P Manuel utilisateur

Panel PC

PPC-x86P

Always at the forefront of innovation

User Manual

This publication contains information that is protected by copyright. No part of it may be reproduced in any

form or by any means or used to make any transformation adaptation without the prior written permission

from the copyright holders.

This publication is provided for informational purposes only. The manufacturer makes no representations or

warranties with respect to the contents or use of this manual and specifically disclaims any express or implied

warranties of merchantability or fitness for any particular purpose. The user will assume the entire risk of the

use or the results of the use of this document. Further, the manufacturer reserves the right to revise this

publication and make changes to its contents at any time, without obligation to notify any person or entity of

such revisions or changes.

All trademarks and registered trademarks of products appearing in this manual are the properties of their

respective holders.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio TV technician for help.

Notice:

1. The changes or modifications not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

2. Shielded interface cables must be used in order to comply with the emission limits.

Trademarks

FCC and DOC Statement on Class A

1. Warranty does not cover damages or failures that are raised from misuse of the product, inability to use the

product, unauthorized replacement or alteration of components and product specifications.

2. The warranty is void if the product has been subject to physical abuse, improper installation, modification,

accidents or unauthorized repair of the product.

3. Unless otherwise instructed in this user’s manual, the user may not, under any circumstances, attempt to

perform service, adjustments or repairs on the product, whether in or out of warranty. It must be returned

to the purchase point, factory or authorized service agency for all such work.

4. We will not be liable for any indirect, special, incidental or consequential damages to the product that has

been modified or altered.

It is quite easy to inadvertently damage your PC, system board, components or devices even before installing

them in your system unit. Static electrical discharge can damage computer components without causing any

signs of physical damage. You must take extra care in handling them to ensure against electrostatic build-up.

1. To prevent electrostatic build-up, leave the system board in its anti-static bag until you are ready to install

it.

2. Wear an antistatic wrist strap.

3. Do all preparation work on a static-free surface.

4. Hold the device only by its edges. Be careful not to touch any of the components, contacts or connections.

5. Avoid touching the pins or contacts on all modules and connectors. Hold modules or connectors by their

ends.

Important:

Electrostatic discharge (ESD) can damage your processor, disk drive and other

components. Perform the upgrade instruction procedures described at an ESD

workstation only. If such a station is not available, you can provide some ESD protection

by wearing an antistatic wrist strap and attaching it to a metal part of the system chassis.

If a wrist strap is unavailable, establish and maintain contact with the system chassis

throughout any procedures requiring ESD protection.

Warranty

Static Electricity Precautions

To avoid damage to the system:

• Use the correct AC input voltage range.

To reduce the risk of electric shock:

• Unplug the power cord before removing the system chassis cover for installation or servicing. After installation

or servicing, cover the system chassis before plugging the power cord.

Battery:

• Danger of explosion if battery incorrectly replaced.

• Replace only with the same or equivalent type recommend by the manufacturer.

• Dispose of used batteries according to local ordinance.

Before using the system, prepare basic system components.

If the system comes as a barebone; that is, none of the key components, including processor, memory, and hard

drive has been pre-installed as part of your purchase, you will need to at least ensure a compatible counterpart

is located and installed.

You will also need a few external system peripherals intended for the use of the system, a common pool with

at least a keyboard, a mouse, and a monitor is thus suggested.

Safety Measures

Before Using the System

Table of Content

Copyright ................................................................................................................................................................ 2

Trademarks................................................................................................................................................................. 2

FCC and DOC Statement On Class A .......................................................................................................................... 2

Warranty..................................................................................................................................................................... 3

Static Electricity Precautions...................................................................................................................................... 3

Safety Measures......................................................................................................................................................... 4

Before Using the System Board ................................................................................................................................. 4

Table of Content......................................................................................................................................................... 5

Chapter 1 General Information

1.1 Main Feature

........................................................................................................................................................... 7

1.2 Specifications

........................................................................................................................................................

1.3 Board Layout ..................................................................................................................................................... 9

1.4 Indications & Features.................................................................................................................................... 10

1.5 Back Panel Connectors ................................................................................................................................... 12

Chapter 2 Jumper Setting

2.1 Before You Begin...................................................................................................................................... 14

2.2 Precautions ..................................................................................................................................................... 14

2.3 Open Up Memory and Drive Back Cover ......................................................................................................... 15

2.4 Accessing Memory............................................................................................................................................. 16

2.5 Accessing 2.5” Drive........................................................................................................................................... 17

2.6 Open Up Expansion Slot Back Cover.................................................................................................................. 18

2.7 Accessing PCIe X4 Slot........................................................................................................................................ 19

2.8 Accessing CPU and Cooler ................................................................................................................................. 20

Chapter 3 Android Software Access

3.1 Turning On The System .................................................................................................................................. 22

3.2 Installing Operating System & Drivers

...........................................................................................................

3.3 Understanding LAN Indicators........................................................................................................................... 25

Chapter 4 Android Software Access

4.1 Entering Setup................................................................................................................................................ 28

4.2 Getting Help.................................................................................................................................................... 28

4.3 Control Keys.................................................................................................................................................... 28

4.4 The Main Menu .............................................................................................................................................. 29

4.5 The Advanced Menu....................................................................................................................................... 30

4.6 The Chipset Menu........................................................................................................................................... 32

4.7 The Boot Menu............................................................................................................................................... 34

4.8 The Security Menu.......................................................................................................................................... 36

4.9 The Save & Exit Menu..................................................................................................................................... 38

Chapter 5 Q & A................................................................................................................... 38

Chapter 1

General Information

Performance Panel PC

PPC-x86P is a general purpose Panel PC featuring Intel® H77 PCH chipset that supports Intel® Gen-2/3

Core™ desktop processor and two Dual Channel DDR3 SO-DIMM slots up to maximum 16GB DDR3

1066/1333/1600MHz SDRAM with Non-ECC support and integrated HD graphic controller.

Every Size Matters

From as small as 10.4” easy admission control to some large management console crammed with panes of

information, PPC of various sizes are delivered to facilitate all different field sites, in terms of physical touch

with machine to be controlled or monitored and display resolutions that are demanded for proper

presentation and user experience.

Luxurious Input & Output

Perfectly designed for industrial applications, PPC-x86P offers a wide variety of input and output, such as

HDMI + DisplayPort, Dual Gigabit Ethernet, Audio, 3x RS-232, and user’s choice of optional port as RS-485

or DB15 VGA. For places with only space to hold a display, while no extra space is reserved for a computer

controller, PPC-x86P represents a perfect solution with low actuation touch, an optional PCIe slot to expand

functions as well as slim DVD for easy maintenance and data reload.

List of Key Features

Intel® Core™ Gen-2/3 i3/i5/i7 CPU

10.4" ~ 19" Full Range Panel Size

5-Wire Resistive Low Actuation Touch

Optional 1x PCIe X4 Slot

Optional 802.11 b/g/n Wi-Fi module

Optional Slim DVD

1.1 Main Feature

System

Motherboard

BNX-I77

Process

Support Intel® Gen-2/3 Core i3, i5, i7, Pentium® , Celeron® Processor Single LGA1155 Socket

Chipset

Intel® H77 PCH

Memory

2x DDR3 1066/1333 DIMM Slots, up to 16GB, Non-ECC/Non-Buffered Memory Module

Operation System

Android / Linux / Windows

Display

Size/Type

10.4”

12.1”

15”

17”

19”

Resolution

1024x768

1280x1024

Brightness(cd/m2)

350

300

350

Dimension(mm)

311 x 238 x 55

388 x 335 x 73

408 x 355 x 73

Touch interface

5-Wire Resistive Low Actuation Touch

Touch stress

Saving 50%, 20~25g

Drive Bay

SATA HDD

1* 2.5”HDD Bay

Slim DVD

None

Option

Connectivity

Communication

Option 1: Dual 10/100/1000 Mbps

Option 2: Single 10/100/1000 Mbps + Wireless Module (see Options)

I/O

1x Power Switch, 1x DC-in Jack, 2x Audio Jacks, 1x HDMI, 1x Display Port, 1x Power LED

1x HDD LED, 2x RJ45 LAN (or 1x with WiFi), 4x USB 3.0, 3x RS232, 1x RS485 (or VGA)

Expansion Slot

None

1* PCIex4

Power

Input

19Vdc Power-In / 100-240Vac, 50-60Hz

Environment

Operating Temp.

0oC to 60oC

Storage Temp.

-20oC to 70oC

Humidity

10% to 90% (Operating, non-condensing)

VESA Mount

75x75 & 100x100 mm

1.2 Specifications

Figure 1.1: System Layout of PPC-x86P

1.3 System Layout

►Front View

1. Power Switch with LED

2. 2* optional antenna for wireless module

3. HDD LED

►Rear View

1. CPU cooler fan

2. Access cover for RAM & HDD

3. Access cover for PCIe Card

4. Standard VESA Mount (75x75mm & 100x100mm)

1.4 Indicators & Features

Autres manuels pour PPC-x86P

Table des matières

Autres manuels BESTEK Écran tactile

BESTEK

BESTEK PPC-x86P Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur