i. **Liftgate may initially jerk away from truck **
c. Driver should operate the liftgate
d. Second person should be on the ground to help stabilize dome
as coming down the liftgate. The empty crate can be removed
on the liftgate if necessary
c. Remove PC Cart Crate from the truck
d. Remove Dolly Crate from the truck
i. Position close to CDP Base crate
2. Handling the Screen
a. The inside screen is a gel coated surface, touching it should be completely avoided as it
can be scratched
i. Scratches and marks on the screen will adversely affect the effectiveness of the
equipment
b. The screen should be handled by 2 people while maneuvering through buildings
i. One person at the front ensuring the front face of the screen does not rub
against hallway
ii. One person watching the rear of the screen
c. Hallways must be minimum width of 48” always
i. Use a drop cloth, plastic, or packing foam to protect the screen and screen
frame from scratches while moving through narrow or tight spaces
d. Maneuvering the screen through a doorway (or into elevator)
i. Prepare by reviewing site discovery form
ii. The screen will maneuver through a 48” or wider doorway with no issue
iii. Doorways smaller than 48” must be at least 35 ” wide with a four feet of clear
space on both the exterior and interior wall on the side of the door that the
screen will wrap around. (Image below for reference)
1. A 4-foot-wide exterior and interior non-obstructed area must be clear of
all permanent fixtures like shelves, tables, and sinks. It may be
necessary for the customer to have these moved before installation
begins.
2. Remove Overhead automatic door closers to allow the door to fully
swing open
3. Doors may need to be removed
