BEROTEC EC 250 Manuel utilisateur

GasGas / KTM / HUSQVARNA

CUMPAN

BEROTECBEROTEC

Benutzerhandbuch

User Guide

Manuel d‘utilisation

Manuale d‘uso

Manual del usuario

EC 250

EC 300

EX 250

EX 300

EXC 250-TPI

EXC 300-TPI

FE 250i

TE 300i

TX 300i

2-Takt / 2-stroke

BEROTEC

CUMPAN

Installation GasGas / KTM / HUSQVARNA

1. Install CUMPAN Display at desired position

» Look for the blue connector (1) above the cylinder.

» Insert intermediate plug (2) and connect with CUMPAN (black cable) (3)

» Lead cable behind the lamp mask

» Lay cables on the existing cable harness

Video

2. Connect RPM signal

English

4. Connect power

3. Engine temperature sensor (water temperature)

» Behind the lamp mask on the parking light removed

→brown = ground →green = plus

» Install on the water pump housing

» replaces the lower screw of the pump hou-

sing cover M6x20 screw

» Connect engine temperature sensor con-

nector

» Motor protection must not touch the

sensor

» Check the seal at operating temperature!

6. Settings in the „SENS“ menu: // SENSOR → UNI // COUNT → 18 // DAMPING → 200 //

7. Carry out calibration of the gears (see operating instructions)

+49 7262-6168573

info@berotec.de

www.berotec.de

BEROTEC GmbH

Georg-Schlatter-Straße 10

75031 Eppingen

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels BEROTEC Accessoires pour motos

BEROTEC

BEROTEC HUSQVARNA 701 Manuel utilisateur

BEROTEC

BEROTEC Mofessor Manuel utilisateur