TO REDUCE THE RISKOF FIRE AND ELECTRICSHOCK, DO NOT EXPOSETHIS UNIT TO RAINOR
MOISTURE.
IMPORTANT SAFEGUARDS
: To reduce the
risk of fire and electric shock,do
not remove the cover (or back)of
the unit. Refer servicing only toqualified service personnel.
The lightning flash with arrowhead symbol,within an equilateral
triangle, is intended to alert the userto the presence of uninsulated
"dangerous voltage" within product's enclosure thatmay be of
sufficient magnitude to constitute a risk ofelectric shock.
The exclamation point within an equilateraltriangle is intended to
alert the user to the presence ofimportant operation and servicing
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OFFIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE TO RAIN ORMOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDEBLADE OF
PLUG TO WIDE SLOT AND FULLY INSERT.
In addition to the careful attentiondevoted to quality standards
in the manufacture of your videoproduct, safety is a major factor
in the design of every instrument.However, safety is your
responsibility, too. This sheet lists importantinformation that will
help to assure your enjoyment andproper use of the video
product and accessory equipment. Please readthem carefully
before operation and using your videoproduct.
Installation
10.
11.
11a.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
CAUTION
The apparatus shall not be exposed todripping or splashing, and that no
objects filled with liquids, such as vases,shall be place on the apparatus.
SAFETY INFORMATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
Read and Follow Instructions- All the safetyand operation instructions
should be read before the video productis operated. Follow all
operating instructions.
Retain Instructions- The safety and operating instructionsshould be
retained for future reference.
Heed all Warnings-Comply with all warnings onthe video product and
in the operating instructions.
Polarization- Some video products are equipped witha polarized
alternating -current line plug. This plug willfit into the power outlet, try
reversing the plug. If the plugstill fails to fit, contact your electrician to
replace your obsolete outlet. To preventelectric shock, do not use this
polarized plug with an extension cord, receptacle,or other outlet unless
the blades can be fully insertedwithout blade exposure. If you needan
extension cord, use a polarized cord.
Power Sources- This video product should beoperated only from the
type of power source indicated on themarking label. If you are not sure
of the type of power supply toyour home, consult your video dealer or
local power company. For video products intendedto operate from
battery power, or other sources, refer tothe operating instructions.
Overloading- Do not overload wall outletsor extension cords as this can
result in a risk of fire orelectric shock. Overloaded AC outlets, extension
cords, frayed power cords, damaged or crackedwire insulation, and
broken plugs are dangerous, They mayresult in a shock or firehazard.
Periodically examine the cord, and if itsappearance indicated damage or
deteriorated insulation, have it replaced by yourservice technician.
Power-Cord Protection- Power-supply cords should berouted so that
they are not likely to be walkedon or pinched by items placed uponor
against them, paying particular attention to cordsat plugs, convenience
receptacles, and the point where theyexit from the video product.
Where the MAIN plug or an appliancecoupler is used as the disconnect
device, the disconnect device shall remain readilyoperable.
Ventilation- Slots and openings in the caseare provided for ventilation
to ensure reliable operation of the videoproduct and to protect it from
overheating. These openings must not the blockedor covered. The
openings should never be blocked byplacing the video product on a bed,
sofa, rug, or heat register. This videoproduct should not be placed in a
built-in installation such as a book caseor rack, unless proper ventilation
is provided or the video product manufacturer'sinstructions have been
followed.
Attachments- Do not use attachments unless recommendedby the video
product manufacturer as they may cause hazards.
The apparatus shall not be exposedto dripping or splashing and thatno objects
filled with liquids ,such as vases shallbe placed on the apparatus.
Caution: Maintain electrical safety. Powerline operated equipmentor accessories
connected to this unit should bear safetycertification mark on the accessory itself
and should not be modified so asto defeat the safety features. This willhelp avoid
any and should not be modified soas to defeat the safety features. Thiswill help
avoid any potential hazard from electrical shockor fire. If in doubt, contact
qualified service personnel.
Accessories- Do not place this videoproduct on an unstable cart, stand,tripod,
bracket, or table. The video product mayfall, causing serious injury to a childor
adult as well as serious damage tothe video product. Use this video productonly
with a cart, stand, tripod, bracket, ortable recommended by the manufacturer's
or sold with the video product. Anymounting of the product should follow the
manufacturer's instructions and use of a mountingaccessory recommended by
the manufacturer.
A video product and cart combination shouldbe moved with care. Quick stops,
excessive force, and uneven surfaces may causethe video product and cart
combination to overturn.
Note to CATV system installer
This reminder is provided to callthe CATV system installer's attention to
Section 820-40 of the NEC which providesguidelines for proper grounding
and, in particular, specifies that the cableground shall be connected to the
grounding system of the building, asclose to the point of cable entry as
practical.
Outdoor Antenna Grounding- If an outsideantenna or cable system is connectedto
the video product, be sure theantenna or cable system is groundedso as to provide
some protection against voltage surges and built-upstatic charges. Section 810 of
the National Electrical Code, ANSI/NFPA No.70-1984(Section 54 of Canadian
Electrical Code, Part1) provides information with respectto proper grounding of
the mast and supporting structure, groundingof the lead-in wire to an antenna-
discharge unit, connection to grounding electrodes, andrequirements for the
grounding electrode.
Power Lines-An outside antenna system should notbe located in the vicinity of
overhead power lines, other electric lightor power circuits, or where itcan fall into
such power lines or circuits. When installingan outside antenna system, extreme
care should be taken to keep fromtouching or approaching such power lines or
circuits, as contact with them might befatal. Installing an outdoor antenna can be
hazardous and should be left to aprofessional antenna installer.
Use
Cleaning- Unplug this video product from thewall outlet before cleaning.
Do not use liquid cleaners or aerosolcleaners. Use a damp cloth for cleaning.
Objects that may touch dangerous voltage pointsor "short-out" parts could result in
a fire or electric shock. Neverspill liquid of any kind on thevideo product.
Lightning-For added protection for this video productduring a lightning storm, or
when it is left unattended and unusedfor long periods of time, unplug itfrom the
wall outlet and disconnect the antennaor cable system. This will preventdamage to
the video product due to lightning andpower line surges.
Service
Servicing-Do not attempt to service this videoproduct yourself, as opening or
removing covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
Conditions Requiring Service-Unplug this video product fromthe wall outlet and
refer servicing to qualified service personnel underthe following conditions:
A. When the power-supply cord orplug is damaged.
B. If liquid has been spilled,or objects have fallen into thevideo product.
C. If the video product has beenexposed to rain or water.
D. If the video does not operatenormally by following the operating
instructions.
Adjust only those controls that are coveredby operating instructions.
Improper adjustment of other controls may resultin damage and will often
require extensive work by a qualifiedtechnician to restore the video product
to its normal operation.
E. If the video product hasbeen dropped or cabinet has beendamaged.
F. When the video product exhibits adistinct change in performance-this
indicates a need for service.
Replacement Parts-When replacement parts are required,have the service
technician verify that the replacements heuses have the same safety
characteristics as the original parts. Use ofreplacements specified by the video
product manufacturer can prevent fire, electric shock,or other hazards.
Safety Check-Upon completion of any service orrepairs to this video product, ask
the service technician to perform safety checksrecommended by the manufacturer
to determine that the video product isin safe operating condition.
Wall or Ceiling Mounting- The product shouldbe mounted to a wall or ceilingonly
as recommended by the manufacturer.
Heat-The product should be situated away fromheat sources such as radiators,
heat registers, stoves, or other products(including amplifiers) that products heat.