BenQ RP7503 Manuel utilisateur
Getting Started with BenQ RP7503 Panel
Introduction
The BenQ Panel provides seamless, integrated,
and interactive learning. The panel is packed
with interactive tools that help teachers and
students make the most of instructional
moments. This quick reference guide provides
information on the control panel, sidebar menu,
and front and side input and output ports.
Control Panel
1. NFC Sensor: Tap NFC card here to login or
tap the end of the panel pen to activate
EZWrite.
2. Signal Receiver/Ambient Light Sensor:
Receiver for the panel’s wireless remote
and detects ambient light around the
display.
3. Power: Tap to enter energy saving mode.
Press and hold for 4 seconds or more to
power off.
4. Home: Tap to return to the main interface.
5. Back/Return: Tap to return to the previous
screen.
6. OSD Settings: Press to open or close the
OSD settings menu.
7. Volume: Adjust the volume of the panel
using the Volume Down or Volume Up
buttons.
Sidebar Menu
The Sidebar Menu is easily accessible from
the left-hand side or the right-hand side of the
BenQ Panel. The height of the Sidebar Menu
can be adjusted by dragging it up or down on
the side of the panel.
1. Home: Tap to return to the main interface.
2. Back: Tap to return to the previous screen.
3. EZWrite: Tap to enter EZWrite annotation
software.
4. Freeze: Tap to freeze the current screen.
5. Floating Tool: Tap to open the floating
annotation tool.
NOTE: As the panel is used, the Sidebar Menu
will update with recently used applications.
1 of 2Updated 04/18/2023 Division of Academics
1 2 3 4 5 6 7
1
2
3
4
5
Getting Started with BenQ RP7503 Panel
Front of Panel Input/Output
Ports
1. Type-C: Connects to a source using an
USB-C cable.
2. HDMI: Connects to a source using an
HDMI cable.
3. Touch-USB: Supports touch signal input
from an external device.
4. USB 3.0: Connect USB devices such as
keyboards, wireless mouse, and USB flash
drives.
5. Mic-In: Receives sound from a source
device via an audio cable.
6. Air Ionizer: Release negative ions.
NOTE: The BenQ RP7503 has multiple ports on
the front and side of the panel. Please note to
enable the touch feature with an HDMI device,
the Touch-USB cable must be plugged into the
Touch-USB port next to the HDMI port being
used.
To make a USB-C hardwire connection, the
front USB-C port must be used. The side
USB-C port only supports data transfer through
an USB-C thumb drive.
Side of Panel Input/Output
Ports
1. USB 2.0: Connects USB devices such as
keyboards, mice, and USB flash drives.
2. Type-C: Connects to USB-C devices for
data transfer.
3. HDMI-Out: Connects to display devices
with an HDMI input.
4. Touch-USB: Supports signal input from an
external device.
5. HDMI: Connects to external device with an
HDMI output or other video device.
6. DP: Connects to a PC, or audio/video
equipment that supports the DisplayPort
interface.
2 of 2Updated 04/18/2023 Division of Academics
1 2 3 4 5 6
1
2
3
4
5
6
Autres manuels BenQ TV
BenQ
BenQ DV2680 Manuel utilisateur
BenQ
BenQ L32 Manuel utilisateur
BenQ
BenQ PDP46W1 - 46W1 - 46" Plasma Panel Manuel utilisateur
BenQ
BenQ E24 Series Manuel utilisateur
BenQ
BenQ X46-5000 Series Manuel utilisateur
BenQ
BenQ DV2050 Manuel utilisateur
BenQ
BenQ L23 series Manuel utilisateur
BenQ
BenQ ML2241 Manuel utilisateur
BenQ
BenQ E37 series Manuel utilisateur
Manuels TV populaires d'autres marques
Philips
Philips Colour Television Manuel utilisateur
Toshiba
Toshiba 27A10 Manuel utilisateur
Philips
Philips 42PF9630A/37 Manuel utilisateur
Hitachi
Hitachi 32FX48B Manuel utilisateur
DAEWOO ELECTRONICS
DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur
Changhong Electric
Changhong Electric uhd55b6000is Manuel utilisateur
