Benchmark 1262-000 Manuel utilisateur

5" RANDOM

ORBIT SANDER

5 year limited warranty on tool

JD2529U

PRODUCT SPECIFICATIONS

5" RANDOM ORBIT SANDER

Voltage 120V , 60 Hz AC

Amperes 2.5A

Speed 0-13000 min OPM (no load)

Sanding pad size: 5 inch (127 mm)

Sandpaper Attachment Hook & Loop

Weight 3.4 LB (1.53Kg)

NEED ASSISTANCE?

Call us on our toll-free customer support line:

1-866-349-8665

(Monday through Friday 9am – 5pm Eastern Standard Time)

• Technical questions

• Replacement parts

• Parts missing from package.

1262-000

5" RANDOM ORBIT SANDER

TABLE OF CONTENTS

Product speciﬁcations ................................................................................... 1

Table of contents ........................................................................................... 2

General safety warnings ............................................................................3 - 6

Speciﬁc safety rules for Random Orbit Sanders ............................................. 7

Guidelines for extension cords ....................................................................... 8

Symbols ........................................................................................................ 9

Know your sander ........................................................................................10

Assembly and operating ..........................................................................11 - 2

Maintenance ............................................................................................... 13

Exploded view ............................................................................................. 14

Parts list ..................................................................................................... 15

Warrant ....................................................................................................... 16

Save these instructions for reference

GENERAL SAFETY WARNINGS

IMPORTANT SAFETY INSTRUCTIONS

WARNING

Before using this tool orany of itsaccessories, read this manual and follow

all Safety Rules and Operating Instructions. The important precautions, safeguards

and instructions appearing in this manual are not meant to cover all possible situations.

It must be understood that common sense and caution are factors which cannot

be built into the product.

EYE, EAR & LUNG PROTECTION

SYMBOL MEANING

ALWAYS WEAR EYE PROTECTION THAT CONFORMS

WITH CSA Z94.3 or ANSI SAFETY STANDARD Z87.1

FLYING DEBRIS can cause permanent eye damage.

Prescription eyeglasses ARE NOT a replacement for proper

eye protection. The usage of a safety standard compliant

face shield placed over proper safety glasses or goggles

can reduce the risk of facial injury.

Non-compliant eyewear can cause serious injury if broken

during the operation of a power tool.

Use hearing protection, particularly during extended periods

of operation of the tool, or if the operation is noisy.

WEAR A DUST MASK THAT IS DESIGNED TO BE

USED WHEN OPERATING A POWER TOOL IN A

DUSTY ENVIRONMENT.

Dust that is created by power sanding, sawing, grinding,

drilling, and other construction activities may contain

chemicals that are known to cause cancer, birth defects,

or other genetic abnormalities. These chemicals include:

• Lead from lead-based paints

• Crystalline silica from bricks, cement, and other

masonry products

• Arsenic and chromium from chemically treated lumber

The level of risk from exposure to these chemicals varies,

according to how often this type of work is performed. In

order to reduce exposure to these chemicals, work in a

well-ventilated area, and use approved safety equipment,

such as a dust mask that is speciﬁcally designed to ﬁlter

out microscopic particles.

1262-000

5" RANDOM ORBIT SANDER

ELECTRICAL SAFETY

WARNING

To avoid electrical hazards, ﬁre hazards or damage to the tool, use proper

circuit protection.

This tool is wired at the factory for 120 V AC operation. It must be connected

to a 120 V AC, 15 A circuit that is protected by a time-delayed fuse or circuit

breaker. To avoid shock or ﬁre, replace power cord immediately if it is worn,

cut or damaged in any way.

Save these instructions for reference.

WARNING

Read all safety warnings, instructions, illustrations and speciﬁcations provided

with this power tool. Failure to follow all instructions listed below may result

in electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future reference.

Always use safety glasses, ear protection and a dust mask when operating the tool.

The term “power tool” in the warnings refers to your mains-operated (corded)

power tool or battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence

of ﬂammable liquids, gases or dust. Power tools create sparks which may ignite

the dust or fumes.

c) Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools.

Unmodiﬁed plugs and matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,

ranges and refrigerators. There is an increased risk of electric shock if your body

is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging

the power tool. Keep cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric shock.

e) When operatinga power tool outdoors, usean extension cord suitable for outdoor

use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f) If operating a power tool in adamp location is unavoidable, use a residual current

device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating

a power tool. Do not use a power tool while you are tired or under the inﬂuence

of drugs, alcohol or medication. A moment of inattention while operating power

tools may result in serious personal injury.

b) Use personal protective equipment. Always wear eye protection. Protective

equipment such as a dust mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce personal injuries.

1262-000

5" RANDOM ORBIT SANDER

connecting to power source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your ﬁnger on the switch or energizing power

tools that have the switch on invites accidents.

d) Remove any adjusting key or wrench before turning the power tool on.

A wrench or a key left attached to a rotating part of the power tool may result

in personal injury.

e) Do not overreach. Keep proper footing and balance at all times. This enables

better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and

clothing away from moving parts. Loose clothes, jewellery or long hair can

be caught in moving parts.

g) If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of dust collection

can reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of tools allow you to become

complacent and ignore tool safety principles. A careless action can cause

severe injury within a fraction of a second.

4) Power tool use and care

Do not force the powertool. Use the correct power tool for your application.The correct

power tool will do the job better and safer at the rate for which it was designed.

tool that cannot be controlled with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or remove the battery pack,

if detachable, from the power tool before making any adjustments, changing

accessories, or storing power tools. Such preventive safety measures reduce

the risk of starting the power tool accidentally.

d) Store idle power tools out of the reach of children and do not allow persons

unfamiliar with the power tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained users.

e) Maintain power tools and accessories. Check for misalignment or binding

the power tool’s operation. If damaged, have the power tool repaired before

use. Many accidents are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with

sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these

instructions, taking into account the working conditions and the work to be

could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free from oil and grease.

Slippery handles and grasping surfaces do not allow for safe handling and

control of the tool in unexpected situations.

5) Service

Have your power tool serviced by a qualiﬁed repair person using only

identical replacement parts. This will ensure that the safety of the power tool

is maintained.

SPECIFIC SAFETY RULES FOR ROS

WARNING

Know your random orbit sander. Do not plug in the sander until you have read

and understand this Instruction Manual.

Learn the tool’s applications and limitations, as well as the speciﬁc potential

hazards related to this tool. Following this rule will reduce the risk of electric

shock, ﬁre, or serious injury.

Always wear eye protection. Any power tool can throw foreign objects into your

eyes and cause permanent eye damage.

ALWAYS

Wear safety goggles (not glasses) that comply with ANSI Safety Standard Z87.1.

Everyday glasses have only impact resistant lenses. They ARE NOT safety glasses.

WARNING

Glasses or goggles not in compliance with ANSI Z87.1 could cause serious

injury when they break.

WARNING

Always use a dust mask when sanding.

WARNING

Always use hearing protection when sanding, particularly during extended

periods of operation.

WARNING

Always unplug the tool from the power source before changing the sandpaper

and when cleaning the tool.

Do not wear gloves, neckties or loose clothing.

Secure the workpiece. Use clamps or a vise to hold the work when practical.

It is safer than using your hand and it frees both hands to operate the tool.

Do not sand material too small to be securely held.

Make sure there are no nails or foreign objects in the part of the workpiece

to be sanded.

Always keep hands out of the path of the sanding pad. Avoid awkward hand posi-

tions where a sudden slip could cause your hand to move into the path

of the sanding pad.

To avoid injury from accidental starting, always remove the plug from the power

source before installing or removing sandpaper or the vacuum adaptor.

1262-000

5" RANDOM ORBIT SANDER

GUIDELINES FOR EXENSION CORDS

Make sure your extension cord is the proper size. When using an extension cord,

be sure to use one heavy enough to carry the current the tool will draw. An undersized

cord will cause a drop in line voltage resulting in loss of power and overheating.

The table below showsthe correct size to use according to cord length and

nameplate ampere rating. Ifin doubt, use the next heavier gauge.The smaller

the gauge number the heavier the cord.

Be sure your extension cord is properly wired and in good condition. Always replace

a damaged extension cord or have it repaired by a qualiﬁed electrician before

using it. Protect your extension cord from sharp objects, excessive heat and damp

or wet areas.

Use a separate electrical circuit for your power tools. This circuit must not

be less than 14 gauge wire and should be protected with either a 15A time delay

fuse or circuit breaker. Before connecting the power tool to the power source,

make sure the switch is in the OFF position and the power source is the same

as indicated on the nameplate. Running at lower voltage will damage the motor.

When operating a power tool outdoors, use an outdoor extension cord marked

“W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric

shock.

WARNING

Keep the extension cord clear of the working area. Position the cord so it will

not get caught on the workpiece, tools or any other obstructions while you are

working with the power tool.

WARNING

Repair or replace damaged or worn extension cords immediately.

Select the appropriate extension cord gauge and length using the chart below.

LENGTH OF EXTENSION CORD

110V-120V 25’(7.5 m) 50’ (15.25 m) 100’ (30.5 m) 150’ (45.7 m)

Amps AWG Wire Size

0-6 18 16 16 14

7-10 18 16 14 1 2

11-12 16 16 14 12

13-16 14 12 Not recommended

SYMBOLS

WARNING

Some of the following symbols may appear on the random orbit sander. Study these

symbols and learn their meaning. Proper interpretation of these symbols will allow

Volts

Amperes

Hertz

Watts

Kilowatts

Microfarads

Liters

Kilograms

Hours

Newtons per

square centimeter

Pascals

Oscillations per minute

Minutes

Seconds

Alternating current

Three-phase

alternating current

Three-phase alternating

current with neutral

Direct current

No load speed

Alternating or direct current

Class II construction

Splash-proof construction

Watertight construction

Protective grounding a

grounding terminal, Class I tools

Revolutions or reciprocations

per minute

Diameter

Directional arrow

Warning symbol

Wear your safety glasses

This symbol designates that this tool is listed with U.S. and

Canadian requirements by cTUVus Testing Laboratories, Inc.

UL62841-1，UL62841-2-4;

CSA C22.2#62841-1，CSA C22.2#62841-2-4 .

JD2529U

Table des matières

Autres manuels Benchmark Sander

Benchmark

Benchmark 2.2AMP VS 1/3 Manuel utilisateur

Benchmark

Benchmark 1262-200 Manuel utilisateur

Benchmark

Benchmark 1282 006 Manuel utilisateur

Benchmark

Benchmark 1262-001 Manuel utilisateur

Benchmark

Benchmark 1262-301 Manuel utilisateur

Manuels Sander populaires d'autres marques

Oliver

Oliver 6305 Manuel utilisateur

Jet

Jet 22-44 Pro-3 Manuel de service

Makita

Makita M9204 Manuel

Makita

Makita M9204 Manuel utilisateur

Craftsman

Craftsman 351.215131 Manuel utilisateur

Clarke

Clarke Woodworker CBS1-5B Mode d’emploi

Chicago Pneumatic

Chicago Pneumatic CP9778 Manuel utilisateur

Nitto Kohki

Nitto Kohki BB-20 Manuel utilisateur

Ferm

Ferm FEOS-135 Manuel utilisateur

Unior

Unior 1510 Manuel utilisateur

stayer

stayer ls1200 Manuel utilisateur

Jet

Jet JSG-96 Manuel de service

Parkside

Parkside PDS 290 B2 Manuel utilisateur

Status

Status XPA Series Manuel utilisateur

Clarke

Clarke EZ Sand Manuel utilisateur

Craftsman

Craftsman 113.22521 Manuel utilisateur

Craftsman

Craftsman 113.225831 Manuel utilisateur

CLAS

CLAS OP 1429 Manuel utilisateur