Bematech LC7100 Manuel utilisateur
LC7100 Smart PC
ii
Copyright 2012
All Rights Reserved
Manual Version 1.1
Part Number: LC7100
The information contained in this document is subject tochange without
notice.
We make no warranty of any kind with regard tothis material, including,
but not limited to, the impliedwarranties of merchantability and fitness
for a particular purpose. We shall not beliable for errorscontained herein
or for incidentalor consequential damages in connection with the
furnishing, performance, oruse of thismaterial.
This documentcontains proprietary information that isprotected by
copyright. All rightsare reserved. No part ofthisdocumentmay be
photocopied, reproduced or translatedto another language without the
prior written consent ofthe manufacturer.
TRADEMARK
Intel®, Pentium® and MMX are registered trademarks of Intel®
Corporation. Microsoft® andWindows®are registered trademarks of
MicrosoftCorporation.
Other trademarks mentionedherein are the property oftheir respective
owners.
iii
Safety
IMPORTANT SAFETY INSTRUCTIONS
1. To disconnect themachine from the electrical Power Supply, turn off
the powerswitch and remove thepower cord plug from the wall socket.
The wallsocket must be easily accessible and inclose proximity to the
machine.
2. Read these instructionscarefully. Save these instructions for future
reference.
3. Followall warningsand instructions markedonthe product.
4. Do not use this product nearwater.
5. Do not place thisproduct on an unstable cart,stand, or table. The
product may fall, causing serious damage to the product.
6. Slotsand openings inthe cabinet andtheback orbottom are provided
for ventilation;to ensure reliableoperation of the product and to
protect it from overheating.These openings must not be blockedor
covered.The openings shouldnever beblocked by placingthe product
on a bed,sofa, rug, orother similar surface.This product should never
be placed near orover a radiator or heat register,or in a built-in
installation unless proper ventilation is provided.
7. This product should beoperated from the type of power indicatedon
the marking label. Ifyou are notsure of the type of power available,
consult your dealeror local powercompany.
8. Do not allow anythingto rest onthe power cord. Do notlocate this
product where persons willwalkon the cord.
9. Never push objects ofany kindinto this product through cabinet slots
as they may touch dangerous voltage points or short outparts that
could result in a fire or electric shock. Never spillliquid of anykind on
the product.
CE MARK This devicecomplies withthe requirements of the EEC directive
2004/108/EC with regard to “Electromagnetic compatibility” and
2006/95/EC “Low Voltage Directive”
FCC This devicecomplies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference
that maycause undesired operation
iv
CAUTION ON LITHIUM BATTERIES
There is a dangerof explosion if the battery is replaced incorrectly. Replace
only with the same orequivalent typerecommended by the manufacturer.
Discard used batteries according to the manufacturer’s instructions.
BatteryCaution
Risk ofexplosion ifbattery is replaced by an incorrectly type.
Dispose of used battery according tothe local disposal instructions.
SafetyCaution
Note: To comply with IEC60950-1Clause 2.5(limited power sources,L.P.S)
related legislation, peripheralsshall be 4.7.3.2 "Materials for fire enclosure"
compliant.
4.7.3.2 Materials forfire enclosures
For MOVABLE EQUIPMENT having a total mass not exceeding
18kg.the material of a FIRE ENCLOSURE, in the thinnest significant
wall thickness used, shall be of V-1 CLASS MATERIAL or shall pass
the test of Clause A.2.
For MOVABLE EQUIPMENT having atotal mass exceeding 18kg
and for allSTATIONARY EQUIPMENT, the material of a FIRE
ENCLOSURE, in the thinnest significant wallthickness used, shall
be of5VB CLASSMATERIALor shallpass the testof ClauseA.1
LEGISLATION AND WEEE SYMBOL
2002/96/EC Waste Electrical and Electronic Equipment Directiveon the
treatment, collection, recycling and disposal of electric andelectronic
devices and their components.
v
The crossed dustbin symbol on the device means thatit should notbe
disposedof with other household wastes at theend of its working life.
Instead,the device should betaken to thewaste collection centers for
activation of the treatment,collection, recycling and disposal procedure.
To preventpossible harm to the environmentorhuman healthfrom
uncontrolled waste disposal, please separate this from other types of
wastes andrecycle itresponsibly to promote thesustainable reuse of
material resources.
Household users should contacteither the retailerwhere they purchased
this product, ortheirlocal government office,for details ofwhereand
how they cantake thisitem forenvironmentallysafe recycling.
Business users should contact theirsupplier andcheck theterms and
conditions of the purchase contract.
This product should not be mixedwith other commercial wastes for
disposal.
vi
Revision History
Changes to the original user manual arelisted below:
Revision Date Description
V1.0 Jul 2012 Initial release
V1.1 Sep 2012 Content update
vii
TableofContents
1ItemChecklist................................................8
1-1 Standard Items............................................................8
2System View ..................................................9
2-1 Front View....................................................................9
2-2 RearView......................................................................9
2-3 Bottom View..............................................................10
2-4 I/O View........................................................................11
3Peripheral Installation ..............................13
3-1 CashDrawer...............................................................13
3-2 Serial Ports(COM 1 to COM 4) .................................15
4System Assembly & Disassembly.............17
4-1 Replace the HDD....................................................... 17
4-2 Replace the Motherboard........................................18
5Specification................................................19
6JumperSettings..........................................20
6-1 C56 Motherboard..................................................... 20
7BIOSSettings...............................................26
7-1 VGAwith 12V Setting............................................... 28
Appendix..........................................................30
8
1 Item Checklist
Take the system unit out of the carton. Removethe unit from the carton by holding it
by thefoam inserts.The followingcontents should be found in the carton:
1-1 Standard Items
a.
c.
b.
d.
e.
a. System
b. DriverCD
c. PowerAdapter (65W)
d. PowerCable
e. COM-RJ45 Cable (x2)
9
2 System View
2-1 Front View
Number Description
1 FRONT PLATE
2 CHASSIS COVER
3 CHASSIS
2-2 Rear View
Number Description
4 I/O PLATE
②
①
④
③
10
2-3 BottomView
Number Description
5 Wall Mount Kit Install Position
6 Rubber Pads
⑤
⑥
Autres manuels pour LC7100
1
Table des matières
Autres manuels Bematech Ordinateur de bureau
