Belimo ZTH Series Guide de démarrage rapide

Firmware Upgrade

ZTH-…

www.belimo.eu

T9-ZTH Firmware Upgrade • en • 02.2013

1 / 2

Firmware Upgrade of ZTH devices



Simplest use



No special material required



Actual Upgrade version:

ZTH-GEN V4.50

Type Overview

Type Description

ZTH-GEN Service-Tool for Belimo actuators (MF, MP, LON, MOD,...) and VAV controllers

ZTH-VAV Service-Tool for Belimo VAV controllers

General information

•The Firmware Upgrade may be applied only to devices listed in the type overview.

•The instructions concerning setup and workflow must be observed. Belimo assumes no

responsibility for devices, which are no longer usable due to inappropriate handling.

Required Material

Material

Obtaining

Notebook with Windows XP / 7 and free USB interface

Level converter ZIP-USB-MP with automatic MA/MO switching,

incl. USB cable

Belimo Sales

USB device driver for ZIP-USB-MP,

driver is usually pre-installed by the Belimo PC-Tool

Belimo Web

Connecting cable RJ12 to RJ12 (6P/6C),

e. g. Belimo ZK6-GEN (from September 2010)

Belimo Sales

Programming software "ZTH-Updater Vx_xx.exe",

Executable program incl. ZTH firmware

Belimo Web

Optional:

- quick start guide, can be affixed to the rear of the device

- for upgrade of ZTH-VAV: Sticker "ZTH-GEN" for the front of the device

Belimo Sales









ZTH-

Firmware Upgrade

2 / 2

T9-ZTH Firmware Upgrade • en • 02.2013

www.belimo.eu

Workflow

Preparation

Connect level converter ZIP-USB-MP to the computer. If the required device driver is not installed on

the computer, it can be downloaded from the Belimo Web (administrator privileges required).

The ZTH-Updater software can be downloaded from the Belimo Web. No installation is required.

Upgrade

1. Start ZTH-Updater Vx_xx

2. Select COM-Port

3. Click "Update SW…"

4. Keep the Minus button (-) pressed while connecting the ZTH device to the ZIP-USB-MP

5. Wait for completion of update process

▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒



ZTH will restart!

6. Check Welcome screen of the ZTH

BELIMO ZTH-GEN

HW 1.1 SW:4.xx

7. Disconnect ZTH device from ZIP-USB-MP

For the upgrade of further devices continue with step 3.

Post processing

The ZTH device is immediately ready to use. If required, the settings in the configuration menu can

be checked and adjusted.

Optional: Affix the newest quick start guide to the rear of the device.

Optional, for ZTH-VAV adjustment devices: The ZTH-VAV lettering on the front may be paste over

with an orange ZTH-GEN sticker.

Troubleshooting

ZIP-USB-MP not recognized

- Download and install USB device driver from Belimo Web (administrator privileges required)

COM-Port cannot be opened

- ZIP-USB-MP must be connected before starting the ZTH-Updater tool.

- Check COM Port (Windows control panel)

- Close potential conflict software (PC-Tool, synchronisation software, …)

Update process does not start

- Keep the Minus button (-) pressed while connecting the tool to the actuator.

- Check connecting cable, 6-core version required!

Ce manuel convient aux modèles suivants

Autres manuels Belimo Contrôleurs

Belimo

Belimo AMX24-SR-X1 Manuel utilisateur

Belimo

Belimo TRANE TTF Series Mode d’emploi

Belimo

Belimo NMQB24-MFT Manuel utilisateur

Belimo

Belimo FS Series Manuel d'utilisation et d'entretien

Belimo

Belimo AF120 US Manuel utilisateur

Belimo

Belimo LMB24-MFT Manuel utilisateur

Belimo

Belimo AMQB24-MFT Manuel utilisateur

Belimo

Belimo AF Series Manuel utilisateur

Belimo

Belimo NM24P Mode d’emploi

Belimo

Belimo LRB24-SR-T Manuel

Belimo

Belimo PRCA-S2-T Mode d’emploi

Belimo

Belimo AF24 US Manuel utilisateur

Belimo

Belimo GM24A-MOD Mode d’emploi

Belimo

Belimo LM24A-SX-F Mode d’emploi

Belimo

Belimo CR24 Series Manuel utilisateur

Belimo

Belimo LF120 US Mode d’emploi

Belimo

Belimo LonWorks NMX24-LON Manuel utilisateur

Belimo

Belimo SRF230A-S2-5-O Mode d’emploi

Belimo

Belimo ARX24-3-5 Manuel utilisateur

Belimo

Belimo FSNF Manuel utilisateur

Belimo

Belimo SMQ24G-SR Mode d’emploi

Belimo

Belimo NF24A Manuel utilisateur

Belimo

Belimo NF24A-MOD Mode d’emploi

Belimo

Belimo SY 3-T Series Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur