Belimo GKX24-MFT-X1 Manuel utilisateur

Technical Data 2194

Power Supply 24 VAC ± 20%, 50/60 Hz, 24 VDC ± 10%

Power Consumption Running 12 W

Power Consumption Holding 3 W

Transformer Sizing 21 VA (class 2 power source)

Electrical Connection 18 GA plenum rated cable with 1/2” conduit

connector protected NEMA 2 (IP54) 3ft [1m]

10 ft [3m] and 16 ft [5m]

Overload Protection electronic throughout 0° to 95° rotation

Operating Range Y 2 to 10 VDC, 4 to 20 mA w/ ZG-R01 (500 Ω,

1/4 W resistor), variable (VDC, floating point,

on/off)

Input Impedance 100 k Ωfor 2 to 10 VDC (0.1 mA), 500 Ωfor

4 to 20 mA, 1500 Ωfor PWM, floating point

and On/Off

Feedback Output U 2 to 10 VDC, 0.5 mA max, VDC variable

Angle of Rotation max. 95°, adjustable with mechanical stop

Direction of Rotation (Motor) reversible with built-in switch

Direction of Rotation (Fail-Safe) reversible with switch

Position Indication reflective visual indicator (snap on)

Manual Override external push button

Running Time (Motor) 150 sec (default), variable (95 to 150 sec)

Running Time (Fail-Safe) 35 sec

Bridge Time programmable 0 to 10 sec (2 sec default)

delay before fail-safe activates

Pre-charging Time 5 to 20 seconds

Humidity 5 to 95% RH non condensing (EN 60730-1)

Ambient Temperature Range -22°F to +122°F [-30°C to +50°C]

Storage Temperature Range -40°F to +176°F [-40°C TO +80°C]

Housing NEMA 2, IP54, UL enclosure type 2

Housing Material UL94-5VA

Agency Listings† cULus acc. to UL60730-1A/-2-14, CAN/CSA

E60730-1:02, CE acc. to 2004/108/EC and

2006/95/EC

Noise Level (Motor) <45 dB (A)

Noise Level (Fail-Safe) <45 dB (A)

Servicing maintenance free

Quality Standard ISO 9001

Weight 4 lb [1.8 kg]

†Rated Impulse Voltage 800V, Type of action 1.AA, Control Pollution Degree 3

GKX24-MFT-X1

Modulating, Electronic Fail-Safe, 24 V, for 2 to 10 VDC or 4 to 20 mA Control Signal

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA / CARIBBEAN

Date created, 09/01/2016 - Subject to change. © Belimo Aircontrols (USA), Inc.

Wiring Diagrams

INSTALLATION NOTES

Actuators with appliance cables are numbered.

Provide overload protection and disconnect as required.

Actuators may also be powered by 24 VDC.

Only connect common to negative (-) leg of control circuits.

A 500 Ωresistor (ZG-R01) converts the 4 to 20 mA control signal to 2

to 10 VDC.

Control signal may be pulsed from either the Hot (Source) or Common

(Sink) 24 VAC line.

For triac sink the Common connection from the actuator must be

connected to the Hot connection of the controller. Position feedback

cannot be used with a triac sink controller; the actuator internal

common reference is not compatible.

IN4004 or IN4007 diode. (IN4007 supplied, Belimo part number

40155).

Actuators may be controlled in parallel. Current draw and input

impedance must be observed.

Master-Slave wiring required for piggy-back applications. Feedback

from Master to conrol input(s) of Slave(s).

Meets cULus requirements without the need of an electrical ground

connection.

!WARNING! LIVE ELECTRICAL COMPONENTS!

During installation, testing, servicing and troubleshooting of this

product, it may be necessary to work with live electrical components.

Have a qualified licensed electrician or other individual who has been

properly trained in handling live electrical components perform these

tasks. Failure to follow all electrical safety precautions when exposed to

live electrical components could result in death or serious injury.

Blk (1)

Red (2)

Pnk (4)

Wht (3)

Org (5)

Line

Volts

24 VAC Transformer

Position

Feedback VDC

(+)

(–)

Common

+ Hot

Input

U Output

1 3 46 47

On/Off

24 VAC Transformer (AC Only)

Blk (1) Common

Red (2) + Hot

Wht (3) Y1Input

Org (5) U Output

Pnk (4) Y2 Input

Line

Volts

(–)

(+)

Position

Feedback VDC

110 46 47

Floating Point

Blk (1) Common

Red (2) + Hot

Pnk (4) Y2 Input

Wht (3) Y1 Input

Org (5) U Output

(–)

(+)

Line

olts

24 VAC Transformer

500

1/4 watt

Control Signal

VDC / mA

1 3 5 46 47

VDC/mA Control

Blk (1) Common

Red (2) + Hot

Wht (3) Y1Input

Pnk (4) Y2Input

Org (5) U Output

Line

Volts

24 VAC Transformer (AC only)

(–)

(+)

Position

Feedback VDC

1 8 46 47

PWM Control

GKX24-MFT-X1

Modulating, Electronic Fail-Safe, 24 V, for 2 to 10 VDC or 4 to 20 mA Control Signal

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA / CARIBBEAN

Date created, 09/01/2016 - Subject to change. © Belimo Aircontrols (USA), Inc.

Functions

50%

100%

Control mode acc. to Y

Min

Mid

Max

Normal

abcOrg (5)

24 VAC Transformer (AC Only)

U Output

1 5

Blk (1) Common

Red (2) + Hot

Pnk (4)

Wht (3)

(–)

(+)

Line

Volts

VDC / mA

Control Signal

Y2Input

Y1Input

Override Control

Blk (1) Common

Red (2) + Hot

Wht (3) Y1Input

Org (5) U Output

Master

24 VAC Transformer

Line

Volts

Control Signal

(–)

(+)

Blk (1) Common

Red (2) + Hot

Wht (3) Y1Input

Org (5) U Output

1 5 46 47

Slave

Master - Slave

GKX24-MFT-X1

Modulating, Electronic Fail-Safe, 24 V, for 2 to 10 VDC or 4 to 20 mA Control Signal

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA / CARIBBEAN

Date created, 09/01/2016 - Subject to change. © Belimo Aircontrols (USA), Inc.

Autres manuels Belimo Contrôleurs

Belimo

Belimo SY-3-T-TS Series Guide de démarrage rapide

Belimo

Belimo TR24-SR Manuel utilisateur

Belimo

Belimo AF24-LIN US Manuel utilisateur

Belimo

Belimo AFB Series Manuel utilisateur

Belimo

Belimo FSNF230 US Manuel utilisateur

Belimo

Belimo NIMVR C Series Manuel utilisateur

Belimo

Belimo LF24-3 US Manuel utilisateur

Belimo

Belimo CR24 Series Manuel utilisateur

Belimo

Belimo TRANE TTF Series Mode d’emploi

Belimo

Belimo SRF230A-S2-5-O Mode d’emploi

Belimo

Belimo LMC24 Manuel utilisateur

Belimo

Belimo NMQB24-MFT Manuel utilisateur

Belimo

Belimo AF120 US Manuel utilisateur

Belimo

Belimo AVK230A-3 Manuel utilisateur

Belimo

Belimo LonWorks NMX24-LON Manuel utilisateur

Belimo

Belimo LMB series Manuel utilisateur

Belimo

Belimo LRB24-SR-T Manuel

Belimo

Belimo FS Series Manuel d'utilisation et d'entretien

Belimo

Belimo AR 24-3 Series Manuel utilisateur

Belimo

Belimo NF24A Manuel utilisateur

Belimo

Belimo LMQB24-1 Manuel utilisateur

Belimo

Belimo SY 3-T Series Manuel utilisateur

Belimo

Belimo SY U24-SR Series Guide de démarrage rapide

Belimo

Belimo NFBUP Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur