Belanger SpinLite Manuel utilisateur

SpinLite® Full Side Washer

Belanger, Inc. * P.O. Box 5470 * Northville, MI 48167-5470

Customer Service Phone (248) 349-7010 * Fax (248) 380-9681

SpinLite® Full Side Washer

1MANUAL961 Rev01

Belanger Equipment Owner’s Manual

SpinLite® Full Side Washer

Belanger, Inc®

This manual and the accompanying equipment are protected by United States trademark, copyright, and patent laws. You may

make one copy of this manual. Do not make additional copies of this manual or electronically transmit it in any form whatsoever,

in whole or in part, without the prior written permission of Belanger, Inc.®

The registered trademarks used in this document are the property of their respective owners. The use of such trademarks is for

reference purposes only and does not imply sponsorship or approval of Belanger, Inc.® by these companies or any companies

affiliated with their respective owners.

CURRENT REVISION LOG

1MANUL961 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681

Rev

Release

Date

Page

Description

03/21/22

Front Cover

Updated front cover to new design

Manual

Updated Belanger logo throughout the entire manual

Changed Belanger Limited Warranty on Parts from 30 days to 90 days

Top image: Removed 47-1/2”

Bottom image: Changed the 47-1/2” dimension to 13” Conveyor: 47-1/2” & 14-1/2” Conveyor: 49”

(per Project #32-523)

Added page Installation: Identify Conveyor (per Project #32-523)

Added Note about the 13” Conveyor being shown in images in manual

Updated dimension to driver side Full Side Washer 13” Conveyor: 47-1/2” and 14-1/2” Conveyor: 49”

Added to note under image: (13” Conveyor: 47-12” / 14-1/2” Conveyor: 49”) (per Project #32-523)

Removed placement dimensions DS: 47-1/2”, PS 103-1/2”, and spacing dimension 78-1/2” for the

staggered QuickFire® Plus assemblies

Updated dimension to driver side Full Side Washer 13” Conveyor: 47-1/2” and 14-1/2” Conveyor: 49”

Added to note under image: (13” Conveyor: 47-12” / 14-1/2” Conveyor: 49”) (per Project #32-523)

For Stand-Alone Installation: added dimension for 13” Conveyor: 47-1/2” / 14-1/2” Conveyor: 49”

Added dimension information to Step 2 for the 13” & 14-1/2” wide conveyors (per Project #32-523)

Removed placement dimensions DS: 47-1/2”, PS 103-1/2”, and spacing dimension 78-1/2” for the

staggered QuickFire® Plus assemblies

For Staggered with QuickFire® Plus Installation: added dimension for 13” Conveyor: 47-1/2” / 14-1/2”

Conveyor: 49” for placement of driver side SpinLite® Full Side Washer

Added dimension information to Step 2 for the 13” & 14-1/2” wide conveyors ( per Project #32-523)

85 & 86

Changed Motor/Gearbox from 1GEABX-AS660 to 112271 and 1GEABX-AS661 to 112272 (per

Project #10037)

Back Cover

Updated back cover to new design

SpinLite® Full Side Washer

1MANUL961 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 1

Table of Contents

Belanger Incorporated Limited Warranty..............................................................3

Operational Warning...............................................................................................4

Important Safety Information .................................................................................5

Safety Symbols and Signal Words .................................................................................................................................. 5

IMPORTANT Safety Information –MUST READ............................................................................................................ 6

Introduction .............................................................................................................7

Before You Get Started ................................................................................................................................................... 8

Specifications..........................................................................................................9

Requirements .................................................................................................................................................................. 9

Physical .......................................................................................................................................................................................... 9

Utility............................................................................................................................................................................................... 9

Electrical......................................................................................................................................................................................... 9

General Dimensions...................................................................................................................................................... 10

Inspection ..............................................................................................................11

Equipment to Inspect Before Installation....................................................................................................................... 11

Installation .............................................................................................................13

Identify Conveyor .......................................................................................................................................................... 13

Tunnel Placement: Overview ........................................................................................................................................ 14

Standard, Stand-Alone Configuration .......................................................................................................................................... 14

Staggered, with QuickFire® Plus assemblies .............................................................................................................................. 15

Tunnel Placement: Preparation..................................................................................................................................... 16

Tunnel Placement: Stand-Alone Installation ................................................................................................................. 16

Tunnel Placement: Staggered Installation with QuickFire® Plus .................................................................................. 18

Attach the Arm Assemblies ........................................................................................................................................... 20

Install the Drive Shaft Components............................................................................................................................... 24

Connect the Motor/Gearbox and Slip Ring to the Drive Shaft....................................................................................... 27

Connect LED Power Cable to Slip Ring ........................................................................................................................ 31

Install Hub Assemblies, LED Lights with Electrical Connections & ShineMitts™.......................................................... 32

Attach Hub Assemblies to Drive Shafts ....................................................................................................................................... 32

Hub LED Installation and Electrical Connections......................................................................................................................... 35

Load ShineMitts™ on Hub Assemblies........................................................................................................................................ 37

Connect LED Lights to Wire Harness .......................................................................................................................................... 42

Filler Strip Installation for the SpinLite® FSW Assemblies............................................................................................ 44

Utilities........................................................................................................................................................................... 46

Water Connections: Water Line to the SpinLite® Full Side Washers .......................................................................................... 46

Pneumatic Connections: Air Panel to Cylinders........................................................................................................................... 48

Electrical Connections: Air Panel to Controller ............................................................................................................................ 50

Pneumatic Connections: Initial Air Settings for Air Panel ............................................................................................................ 51

Electrical Connections: Main Power to Motors and LED Lights................................................................................................... 52

Electrical Connections: Motor....................................................................................................................................................... 53

SpinLite® Full Side Washer

1MANUL961 Belanger, Inc. * PO BOX 5470 * Northville, MI 48167-5470 * Ph (248) 349-7010 * Fax (248) 380-9681 2

Table of Contents

Maintenance ..........................................................................................................56

Daily ...............................................................................................................................................................................56

Monthly ..........................................................................................................................................................................56

Quarterly ........................................................................................................................................................................56

Troubleshooting .............................................................................................................................................................57

Powder Coating Maintenance ........................................................................................................................................58

Powder Coating Repair..................................................................................................................................................59

Replacing an LED Light on the Hub Assembly ..............................................................................................................61

Motor Gearbox and Torque Plate Replacement ............................................................................................................64

Remove Motor Gearbox & Torque Plate Assembly..................................................................................................................... 64

Prepare New Motor Gearbox & Torque Plate Assembly for Installation...................................................................................... 71

Install New Motor Gearbox & Torque Plate Assembly................................................................................................................. 72

Exploded Parts View......................................................................................................................................................80

Leg Assembly Components: Driver & Passenger Side................................................................................................................ 80

Leg Assembly Components: Water Feed & Manifold Assembly ................................................................................................. 81

Manifold Assembly: 108730 (2) ................................................................................................................................................... 82

Arm Assembly: Overview............................................................................................................................................................. 83

Arm Assembly: Cylinder & Shock Assemblies............................................................................................................................. 83

Arm Assembly: Pivot Shaft & Bumper Assemblies...................................................................................................................... 84

Arm Assembly: Bearing & Electrical Cable Assemblies............................................................................................................... 84

Arm Assembly: Shaft Assembly 110946 (2) ................................................................................................................................ 85

Motor Gearbox & Torque Plate Assembly ................................................................................................................................... 86

Slip Ring Assembly: 110708 (2)................................................................................................................................................... 86

Motor/Gearbox, Drive Shaft & Cover Assembly........................................................................................................................... 87

Hub Assembly 111673: Hub Cover Components ........................................................................................................................ 88

Hub Assembly 111673: Skin and Spider Assembly..................................................................................................................... 89

Hub ShineMitt™ Fill Pattern......................................................................................................................................................... 90

Hub ShineMitt™........................................................................................................................................................................... 90

ShineMitt™ 19” 45 Degree Short Lead: 111060 (Qty. 80)........................................................................................................... 91

ShineMitt™ 22” 45 Degree Short Lead: 111053 (Qty. 64)........................................................................................................... 92

ShineMitt™ 25” 45 Degree Short Lead: 111369 (Qty. 32)........................................................................................................... 93

Hub Assembly: LED RGB Assembly 111674 .............................................................................................................................. 94

LED RGB Assembly: 111674 (2) ................................................................................................................................................. 94

Filler Strips: Driver Side Arm & Leg Assembly............................................................................................................................. 95

Filler Strips for Passenger Side Arm & Leg Assembly................................................................................................................. 96

Air Panel: 102060 Assembled View............................................................................................................................................. 97

Air Panel: 102060 Exploded View................................................................................................................................................ 97