STATEMENT OF WARRANTY TERMS & CONDITIONS
BelAir’s refrigerated air dryers are warranted to be free of defects in materials and workmanship under
proper use, installation, and application. Warranty covers parts and labor at fair market value and according
to warranty labor replacement guidelines. This warranty shall be for a period of 15 months from date of
shipment from our factory or other stocking facilities or 12 months from date of installation. Proof of
installation date will be required. All dryers outside the U.S. and Canada carry a parts only warranty.
ALL FREIGHT DAMAGE CLAIMS ARE NOT THE RESPONSIBILITY OF THE MANUFACTURER AND
ARE NOT COVERED UNDER WARRANTY AS ALL PRODUCTS ARE SHIPPED F.O.B. SHIPPER.
PLEASE DIRECT ALL FREIGHT CLAIMS TO THE SHIPPER IN QUESTION.
MAINTENANCE AND ADJUSTMENTS
ADJUSTMENTS TO THE HOT GAS AND MAINTENANCE OF FLOAT AND AUTOMATIC DRAINS AND
CONDENSER COILS ARE CONSIDERED TO BE ROUTINE MAINTENANCE AND THEREFORE NON-
WARRANTABLE ITEMS AND ARE THE SOLE RESPONSIBILITY OF THE END USER. CONSULT THE
INSTALLATION, OPERATION AND MAINTENANCE MANUAL FOR THE ADJUSTMENT AND
MAINTENANCE PROCEDURES.
THIS WARRANTY DOES NOT APPLY TO ANY UNIT DAMAGED BY ACCIDENT, MODIFICATION,
MISUSE, NEGLIGENCE, OR MISAPPLICATION. DAMAGE TO HEAT EXCHANGERS BY EXPOSURE
TO AMMONIA, ANY OTHER CORROSIVE SUBSTANCE OR SUB-FREEZING ENVIRONMENT WILL BE
CONSIDERED MISUSE.
Any refrigerated dryer part or material found defective will be repaired, replaced or refunded, at the sellers
option free of charge, provided that BelAir is notified within the above stated warranty period. All returns of
allegedly defective equipment must have prior written authorization. Said authorization may be
obtained through our refrigerated dryer service department. All refrigerated dryers, parts, materials must be
returned freight prepaid to the Manufacturer’s factory for inspection within 30 days of return authorization
date. Any shipment returned to the factory collect will be refused.
After inspection, if an item is found to be warrantable, the repaired item or replacement will be returned
normal ground freight prepaid within the continental United States and Canada. In the event an item is
deemed non-warranty due to improper usage, maintenance, improper installation, abuse, alteration or
operator error the customer is responsible for all charges (including parts, labor or replacement costs)
incurred resolving the warranty claim. Expedited shipment costs are the responsibility of the requestor.
Any replacement part or material is warranted only to the extent of the remaining warranty period of the
dryer or to the extent as provided by the supplier, whichever is longer.
IDENTIFICATION PLATE
The identification plate is located on the back of the dryer and shows all the primary data of the machine.
Upon installation, fill in the table on the previous page with all the data shown on the identification plate. This
data should always be referred to when calling the manufacturer or distributor.
The removal or alteration of the identification plate will void the warranty rights.
DISCLAIMER
The warranty does not cover any responsibility or liability for direct or indirect damages to persons, or
equipment caused by improper usage or maintenance, and is limited to manufacturing defects only. Refer to
BelAir Warranty policy manual for travel, mileage and special charge considerations. The warranty will be
immediately voided if there are changes or alterations to the dryer.
FILTERS AND DRAINS
Filters and drains are warranted to be free from defects in material and workmanship, under proper use,
installation, application and maintenance in accordance with written specifications for a period of one year
from date of purchase. Elements, o-rings and float drains are considered consumable items and are
warranted at installation only.
WHO TO CONTACT IF YOU HAVE A WARRANTY CLAIM:
BelAir Technologies, LLC Phone (302) 832-5800
Fax (302) 832-5900
All freight damage claims should be filed within 15 working days and should be directed to the
carrier.
