23
medical electrical equipment.
• Chemicals from a broken panel are toxic when ingested. Use
caution when the monitor has a broken display screen.
• Debrillation protection only implement on the ECG cable which
has the debrillation function.
• When using debrillation, it needs to remove other non-debrillation
applied parts from patients.
• The use of the device is restricted to one patient at a time.
• Use a debrillator on a patient, the device requires special
protection when the discharge of a debrillator affects the device.
• Please use the accessories that approved by the manufacturer.
• If the device has the battery, it still working after interruption of the
supply mains exceeding 30s. Or else it power off.
• PACEMAKER PATIENTS. Rate meters may continue to count
the pacemaker rate during occurrences of cardiac arrest or some
arrhythmias. Do not rely entirely upon heart rate meter ALARM
SIGNALS.
• To avoid the risk of leakage on the patients, the cable is isolated
by high voltage and adopted the insulation material. In order to
improve the service life of the cable, we use the high quality cables.
• These materials that contact with the patient’s skin are all pass the
ISO10993-5 Tests for invitro cytotoxicity and ISO10993-10 Tests
for irritation and delayed-type hypersensitivity.
• Please take attention that changes or modication not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
• This equipment should be installed and operated with a minimum
distance 20cm between the radiator and your body.
Cautions!
• Check whether the equipment in the correct status or not.
• Check all the leads connection; make sure all of them connect well.
• Check the quantity and status of the battery.
• Make sure the safety of the patient, if it needs cut off the power
supply, take out the leads or sensor.
• Do drop the re goods, medal or liquid into the equipment. If these
effective use of the monitor.
Notes: contain important information that may be overlooked or missed.
Warnings!
• Before use, carefully read the manual.
• Operation of the equipment may be affected by the use of an
electrosurgical unit (ESU) or high-frequency interference.
• Do not use the equipment in an MRI or CT environment.
• Do not use the equipment in an explosive ammable or anesthesia
atmosphere.
• Do not use the equipment on the airplane.
• Do not use the equipment with debrillator, pacemaker or hearing-
aid.
• The equipment is intended only as an adjunct in patient assessment.
It must be used in conjunction with other methods of assessing
clinical signs and symptoms.
• In order to ensure correct sensor alignment and skin integrity, the
maximum application time at a single site for our device should be
less than half an hour.
• Do not sterilize the device using autoclaving, ethylene oxide
sterilizing, or immersing the device in liquid. The device is not
intended for sterilization.
• Only the qualied physician can use the equipment, the patient
should follow the physician’s advice use the equipment.
• Only use the accessories approved by our company. Other
accessories may affect the equipment performance. The
accessories contain battery, external power supply line, cuff, SpO2
sensor and temperature sensor.
• Avoid extremes in temperature and humidity. Do not use this device
in locations subject too high or too low temperature or humidity.
• Avoid to store in the place that has chemicals or gas leakage
dangerous.
• Follow local ordinances and recycling instructions regarding
disposal or recycling of the device and device components,
including batteries.
• Portable and mobile RF communications equipment can affect
