Behringer Bass V-Amp Pro Manuel utilisateur

Behringer Bass V-AMP Pro – Quick Start Guide

Author: CharlieC, TalkBass.com Registered User

Revised: 2/28/2011

Source: http://www.talkbass.com/forum/showthread.php?t=687422

Introduction

This document should help you take control of Behringer’s Bass V-AMP Pro unit and

allow you to truly hear what it sounds like when properly and plainly configured.

Connections

Connect your instrument to the V-AMP's front panel input jack.

Connect either one of the V-AMP's ANALOG LINE OUTPUTS to your amp/combo’s

POWER AMP IN or EFFECT RETURN jacks. *

You should now be in full control of your volume level with just the V-AMP's MASTER

volume knob.

* Connecting this way best ensures that no further tone coloring is added to what

the unit outputs on its own.

Set Operating Mode

Goal: Set unit to L3 mode, flatten the LIVE EQ, and maximize MASTER INPUT GAIN

1. Enter CONFIG mode by pressing the [D] + [E] buttons simultaneously

2. Press the [>] button until L3 is displayed on the front panel

3. Set BASS, MID + TREBLE to 12 o’clock

4. Press and hold the TAP button, GAIN knob now lights up

5. Spin the GAIN knob all the way up **

6. Release the TAP button

7. Exit CONFIG mode by pressing the [TUNER] (EXIT) button

** The default master gain for the unit is set at 50%. This is very inadequate for

most basses. The built-in tuner will work poorly and the amp models will be gain-

starved if this were not adjusted. Should your bass have a really hot or active

output then it is suggested that you find a lower setting that works best for the

V-AMP and your tone goals.

Select Patch 1A

Goal: Select patch 1A as the current patch

1. Press the [<] button until numeral 1 is displayed on the front panel

2. Press the [A] button

Roll Your Own Tone

Goal: Pick an amp model, flatten all controls, save your tone, tweak, rock + repeat

1. Spin the AMP knob and select ROCK CLASSIC (Ampeg SVT)

2. Set GAIN to 2 o’clock

3. Set VOLUME, BASS, MID, TREBLE to 12 o’clock

4. Turn off COMPRESSOR + EFFECTS, spin them all the way down

5. Press and hold the [TAP] button to access the secondary parameters *

6. Spin BASS, MID, TREBLE + EFFECTS to 12 o’clock

7. Release the [TAP] button

* Secondary params are DEEP, SHIFT, PRESENCE, ATTACK, 2ND PARAMETER

Turn-off everything that would secretly spoil the quality of the current patch

1. Press [<] + [>] buttons simultaneously to enter EDIT mode

2. Press [A] button (MIDI) and then press [<] until numeral 1 is displayed

3. Press [B] button (DRIVE) and then press [<] until “--“ is displayed

4. Press [C] button (CABINETS), turn both BASS + TREBLE knobs to 12 o’clock

5. Press [D] button (X-OVER) and then press [<] until “--“ is displayed

6. Press [E] button (DENOISER) and then press [<] until “--“ is displayed

7. Exit EDIT mode by pressing the [TUNER] (EXIT) button

Test drive the ROCK CLASSIC amp model

1. Plug in your bass guitar, start playing, set MASTER volume

2. Ride the BASS knob until you’re moving some air

3. Tweak GAIN, BASS, MID, TREBLE, + COMPRESSOR knobs until satisfied

4. Save tone to Patch 1A (Press and hold the [A] button for about 3-seconds)

Moving Forward

1. Pick another AMP model

2. Season to taste

3. Save tone to Patch 1B (Press and hold the [B] button for about 3-seconds)

4. Press [A] to return to Patch 1A

You should be all set now from here! :-)

Autres manuels pour Bass V-Amp Pro

Table des matières

Autres manuels Behringer Amplificateur

Behringer

Behringer Ultrabass BX600 Manuel utilisateur

Behringer

Behringer VIRTUBE VT15CD Manuel utilisateur

Behringer

Behringer EUROPOWER EPQ2000 Manuel utilisateur

Behringer

Behringer EUROCOM AX6220 Manuel utilisateur

Behringer

Behringer TUBE ULTRAGAIN MIC200 Manuel utilisateur

Behringer

Behringer VIRTUBE VT100FX Manuel utilisateur

Behringer

Behringer Ultrabass BVT4500H Manuel utilisateur

Behringer

Behringer V-Tone GMX110 Manuel utilisateur

Behringer

Behringer Ultrabass BX3000T Manuel utilisateur

Behringer

Behringer iNuke NU6000DSP Manuel utilisateur

Behringer

Behringer Ultrabass BB115 Manuel utilisateur

Behringer

Behringer Minimic Mic800 Manuel utilisateur

Behringer

Behringer 902 Manuel utilisateur

Behringer

Behringer EUROCOM SN2408 Manuel utilisateur

Behringer

Behringer UltraBass BX4500H Manuel utilisateur

Behringer

Behringer Tube Ultragain T1953 Manuel utilisateur

Behringer

Behringer V-Tone Guitar GDI21 Manuel utilisateur

Behringer

Behringer EUROCOM AX6220 Manuel utilisateur

Behringer

Behringer EUROPOWER EP4000 Manuel utilisateur

Behringer

Behringer MA6018 Manuel d'installation et d'exploitation

Behringer

Behringer Ultrabass BX3000T Manuel utilisateur

Behringer

Behringer FOUR PLAY Manuel utilisateur

Behringer

Behringer Tube Ultragain MIC100 Manuel utilisateur

Behringer

Behringer KM1700 Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur