Becom 150-3078-1 Manuel utilisateur

PoE-Splitter

User Manual

Version 3

User Manual - PoE-Splitter

Last change: 25 March 2021/Version 3

2| 15

BECOM Systems GmbH

Gutheil-Schoder-Gasse 17

1230 Wien

AUSTRIA

office.systems@becom-group.com

systems.becom-group.com

PoE-Splitter –User Manual

Publication date: March 25, 2021

Subject to change without notice. Errors excepted.

transmitted for any purpose in any form or by any means, electronically or mechanically, without expressly

written permission by BECOM Systems.

Windows is a registered trademark of Microsoft.

User Manual - PoE-Splitter

Last change: 25 March 2021/Version 3

3| 15

Table of Contents

1General Information ...........................................................................................................................................................................................................5

1.1 Symbols Used.....................................................................................................................................................................................................................5

1.2 Safety instructions ...................................................................................................................................................................................................6

1.3 Electrical connection..............................................................................................................................................................................................6

2Mechanical Installation....................................................................................................................................................................................................7

2.1 Front view .......................................................................................................................................................................................................................7

2.2 Top view ...........................................................................................................................................................................................................................7

2.3 Mounting..........................................................................................................................................................................................................................7

2.3.1 Top Hat Rail Mount........................................................................................................................................................................................... 8

2.3.2 Wall mount.............................................................................................................................................................................................................. 8

3Connecting the Device ....................................................................................................................................................................................................9

3.1.1 Connecting the Camera using a dedicated Camera Cable from BECOM Systems...................................10

4Technical Information ......................................................................................................................................................................................................11

4.1 PoE........................................................................................................................................................................................................................................11

4.2 Operating Conditions ...........................................................................................................................................................................................11

4.3 Product Anomalies .................................................................................................................................................................................................11

5Trouble Shooting.................................................................................................................................................................................................................12

5.1.1 Troubleshooting List.......................................................................................................................................................................................12

5.1.2 Support......................................................................................................................................................................................................................12

6Ordering Information.......................................................................................................................................................................................................13

7Document Revision History........................................................................................................................................................................................14

AList of Figures and Tables ............................................................................................................................................................................................15

User Manual - PoE-Splitter

Last change: 25 March 2021/Version 3

4| 15

The information herein is given to describe certain components and shall not be considered as a guarantee of

characteristics.

Terms of delivery and rights of technical change reserved.

We hereby disclaim any warranties, including but not limited to warranties of non-infringement, regarding

circuits, descriptions and charts stated herein.

BECOM Systems makes and you receive no warranties or conditions, express, implied, statutory or in any

communication with you. BECOM Systems specifically disclaims any implied warranty of merchantability or fitness

for a particular purpose.

BECOM Systems takes no liability for any damages and errors causing of the usage of this board. The user of this

board is responsible by himself for the functionality of his application. He is allowed to use the board only if he

has the qualification. More information is found in the General Terms and Conditions (AGB).

Information

For further information on technology, delivery terms and conditions and prices please contact BECOM Systems

www.becom-group.com

User Manual - PoE-Splitter

Last change: 25 March 2021/Version 3

5| 15

1General Information

This guide applies to the PoE-Splitter from BECOM Systems. Follow this guide chapter by chapter to set up and

understand your product. If a section of this document only applies to certain camera parts, this is indicated at

the beginning of the respective section.

The document applies to product V1.0.x

1.1 Symbols Used

This guide makes use of a few symbols and conventions:

Warning

Indicates a situation which, if not avoided, could result in minor or moderate injury and/or

property damage or damage to the device.

Caution

Indicates a situation which, if not avoided, may result in minor damage to the device, in

malfunction of the device or in data loss.

Note

Notes provide information on special issues related to the device or provide information that will

make operation of the device easier.

Procedures

A procedure always starts with a headline

1. The number indicates the step number of a certain procedure you are expected to

follow.

Steps are numbered sequentially.

This sign indicates an expected result of your action.

References

This symbol indicates a cross reference to a different chapter of this manual or

to an external document.

User Manual - PoE-Splitter

Last change: 25 March 2021/Version 3

6| 15

1.2 Safety instructions

Important

This manual is part of the device and contains information and illustrations about the correct

handling of the device and must be read before installation or use. Observe the operating

instructions. Non-observance of the instructions, operation which is not in accordance with use as

prescribed below, wrong installation or handling can affect the safety of people and machinery.

The installation and connection must comply with the applicable national and international

standards. Responsibility lies with the person installing the unit.

1.3 Electrical connection

Note

The unit must be connected by a qualified electrician.

Device of protection class III (PC III).

The electric supply must only be made via PELV circuits.

The device must only be powered by a limited energy source (≤ 30 V; ≤ 8 A; ≤ 100 VA).

Disconnect power before connecting the unit.

User Manual - PoE-Splitter

Last change: 25 March 2021/Version 3

7| 15

2Mechanical Installation

All dimensions are in mm, tolerance +/-0,5mm.

2.1 Front view

Figure 2-1: Front view dimensions

2.2 Top view

41,5

5,5

118

Top Hat Rail Mount (optional)

Nut for Wall

Mounting

Nut for Wall

Mounting

Figure 2-2: Top view dimensions

2.3 Mounting

There are two mounting possibilities

User Manual - PoE-Splitter

Last change: 25 March 2021/Version 3

8| 15

2.3.1 Top Hat Rail Mount

The Rail mount can be used to mount the device on a top hat rail according to IEC/EN 60715.

Figure 2-3: Hat rail mount

2.3.2 Wall mount

Two nuts in the housing can be used for wall mounting the device. Please refer to Figure 2-2 to see the

dimensions and positions of the nuts.

User Manual - PoE-Splitter

Last change: 25 March 2021/Version 3

9| 15

3Connecting the Device

The following figure shows the interfaces and status LEDs of the device.

Data & PoE IN Data OUT

Power Current Limiter

PoE Class 24V DC OUT

Status LEDs

Figure 3-1: Connectors and LEDs

Connector description:

Connector

Description

Data & PoE IN

Connect this to your PoE switch or injector with a CAT5e or higher category patch cable.

Data OUT

Connect this to your camera with a CAT5e or higher category patch cable or connect it

with the RJ45 plug of your dedicated camera cable from BECOM systems.

24V DC OUT

Connect this header to the power supply cable of your camera. Refer to Figure 3-2 for

the pin description or connect it to the dedicated wires of your camera cable from

BECOM Systems using an appropriate mating part.

Mating part suggestion: 691361100002 from Würth Electronics or similar part

Table 3-1: Connector Description

V+V-

Figure 3-2: Pin description of the camera power supply connector (24V DC OUT)

User Manual - PoE-Splitter

Last change: 25 March 2021/Version 3

10 | 15

3.1.1 Connecting the Camera using a dedicated Camera Cable from BECOM Systems

To Switch /

Injector

Argos3D-P2x

cable

Figure 3-3: Example for connecting an Argos3D-P2xx camera to the PoE-Splitter

Table des matières

Manuels Câbles et connecteurs populaires d'autres marques

Philips

Philips SWA6310 Manuel utilisateur

StarTech.com

StarTech.com CRJ4550PK Manuel utilisateur

Nohau

Nohau EMUL-IP2K-PC Manuel utilisateur

Foxun

Foxun SX-SP144E-HD4K2K Manuel utilisateur

Philips

Philips SWA3305W Manuel utilisateur

opticis

opticis Stretch DVIM1-1P0x Manuel utilisateur

Volkswagen

Volkswagen VAS 6558A Manuel utilisateur

NEXIBO

NEXIBO N-13 Manuel utilisateur

CYP

CYP PU-1H3HBTL Manuel utilisateur

Allen-Bradley

Allen-Bradley 1784-u2dhp Manuel utilisateur

Global Caché

Global Caché Flex Link Blaster Manuel utilisateur

Hauppauge

Hauppauge USB-Live2 Manuel utilisateur

Fenix

Fenix MPSV 15 Manuel utilisateur

BEGA

BEGA 71 085 Manuel utilisateur

Tesla

Tesla HPWC Manuel utilisateur

GAMERON

GAMERON LUXURY TV CABLE Manuel utilisateur

molex

molex Milli-Grid Dual row 87568 Series Manuel utilisateur

Burndy

Burndy Continental Industries thermOweld CRE-7 Manuel utilisateur