Beckett AquaSmart Instructions de fonctionnement
The receiver/transmitter and sensor should be linked together from
the factory. It can be possible for this link to be lost on either side.
Use the following procedures to re-establish this link.
Clearing the old links.
Outdoor Sensor: Hold the button of the WTS for five seconds. The
LED should turn on. While the LED is still on (within 5 seconds),
press the button once more to confirm the clearing. Once the link is
cleared, the LED will flash quickly for 2 seconds.
WIRELESS MENU
ENTER TO VIEW
Navigate to the wireless menu on theAquaSmart keypad
and press ENTER.
OTR MENU
ENTER TO VIEW
The screen reads OTR MENU. Press the down arrow key
to advance to the maintenance menu.
MAINTENANCE MENU
ENTER TO VIEW
Press ENTER.
CONNECTIONS
ENTER TO CLEAR
Press the down arrow key to the CONNECTIONS
ENTER TO CLEAR menu and press ENTER.
CLEAR ALL?
ENTER or CANCEL
Press ENTER.
CLEARED ALL
CONNECTIONS
Cleared all connections will quickly flash on the screen.
Put the WTS in discovery mode: press the WTS button twice. The
LED will flash slowly until it finds the AWM (for up to 3
minutes).
Autres manuels pour AquaSmart
5
Autres manuels Beckett Contrôleurs
Beckett
Beckett GENISYS 7565 Manuel utilisateur
Beckett
Beckett HeatManager 2.5 7516 Manuel utilisateur
Beckett
Beckett GeniSys Display Instructions de fonctionnement
Beckett
Beckett AquaSmart Instructions de fonctionnement
Beckett
Beckett GeniSys 120V Manuel utilisateur
Beckett
Beckett HeatManager 2.5 7514 Manuel utilisateur
Beckett
Beckett Heat Manager 61572 04 Manuel utilisateur
Beckett
Beckett AquaSmart Manuel utilisateur
Beckett
Beckett AquaSmart Instructions de fonctionnement
Beckett
Beckett GeniSys 7575 Manuel utilisateur
