Becker CentronicPLUS SWC548A PLUS Manuel utilisateur

CentronicPLUS

SWC548A PLUS, SWC5416A PLUS

en Assembly and Operating Instructions

Multi-channel hand-held transmitter for sun/

wind control, bidirectional

Important information for:

• Fitters / • Electricians / • Users

Please forward accordingly!

These instructions must be kept safe for future reference.

Becker-Antriebe GmbH

Friedrich-Ebert-Straße 2-4

35764 Sinn/Germany

www.becker-antriebe.com

4036 630 265 023/11/2022

Table of contents

General information ................................................................................. 3

Licensing information for open source software.......................................... 3

Warranty ................................................................................................. 4

Safety instructions ................................................................................... 4

Intended use ........................................................................................... 5

Explanation of displays and buttons........................................................... 6

Explanation of functions ........................................................................... 6

Programming transmitter.........................................................................10

Setting the thresholds .............................................................................10

Restoring the factory settings of the hand-held transmitter.........................14

Installing the wall bracket.........................................................................15

Changing batteries..................................................................................15

Cleaning.................................................................................................16

Disposal .................................................................................................16

Technical data ........................................................................................16

What to do if...?.......................................................................................17

2-en

General information

Products such as roller shutter and sun protection systems, light controls and

remote-controlled sockets can be operated using the different transmission

channels.

This device is exceptionally easy to use.

Please observe these Assembly and Operating Instructions when installing

and setting up the equipment.

Explanation of pictograms

CAUTION CAUTION indicates a hazardous situation

which, if not avoided, could result in in-

jury.

ATTENTION ATTENTION indicates measures that must

be taken to avoid damage to property.

Denotes user tips and other useful in-

formation.

Licensing information for open source

software

This device uses free/open source software.

The licence texts are enclosed with the product in the licence documentation,

which can be identified by the following symbol:

The licence texts for the licensed software being used can be downloaded

from www.becker-antriebe.com/licenses.

3-en

Written request for the licence texts:

Becker-Antriebe will, on request, provide the licence texts for the licensed

software being used at cost price, either on a USB stick or a similar data car-

rier. Please send an email to the following email address for more information:

licenses@becker‑antriebe.com

Warranty

Structural modifications and incorrect installation which are not in accordance

with these and our other instructions can result in serious injuries, e.g., crush-

ing of limbs. Therefore, structural modifications may only be carried out with

our prior approval and strictly in accordance with our instructions, particularly

the information contained in these Assembly and Operating Instructions.

Any further processing of the products which does not comply with their inten-

ded use is not permitted.

The end product manufacturer and fitter have to ensure that all the relevant

current statutory, official and, in particular, EMC regulations are adhered to

during utilisation of our products, especially with regard to end product manu-

facture, installation and customer advice.

Safety instructions

General information

•Please keep the instruction manual safe!

•Only use in dry rooms.

•Only use unmodified original parts from the control unit manufacturer.

•Keep children away from control units.

•Observe all pertinent country-specific regulations.

•Dispose of used batteries properly. Only replace the battery with one of

the same type (see Technical Data).

Caution

•Keep people out of the system’s range of travel.

•If the system is controlled by one or more transmitters,

the system’s range of travel must always be visible during

operation.

•Device contains small parts that can be swallowed.

4-en

Intended use

The transmitter described in these instructions must only be used indoors for

the operation of radio drives and radio control units that are compatible with

the CentronicPlus.

Attention

A safety-relevant function has been provided for the

thresholds. Setting the threshold values wrongly can cause

damage to the sun protection system. For that reason, set-

ting the threshold values for the safety of your sun protection

system should only be done by – or under the instruction of –

a specialist retailer.

•Please note that radio-controlled systems may not be used in areas with

a high risk of interference (e.g. hospitals, airports).

•The remote control is intended solely for use with equipment and sys-

tems in which malfunctions in the transmitter or receiver would not pose

any risk to persons, animals or property, or which contain safety devices

to eliminate such risks.

•The operator is not protected from interference from other telecommu-

nications systems and terminal equipment (e.g. even from radio-con-

trolled systems which are properly operated in the same frequency

range).

•Only connect radio receivers to devices and systems approved by the

manufacturer.

•Ensure that the control unit is not installed or operated

close to metal surfaces or magnetic fields.

•Radio-controlled systems transmitting on the same fre-

quency may cause reception interference.

•Note that the range of the radio signal is limited by legis-

lation as well as by design.

5-en

Explanation of displays and buttons

1. LED ring

2. button

3. button (STOP)

4. button

5. function button

6. Battery compartment

7. programming button

Explanation of functions

LED ring

Display of:

•Confirmations from receiver

•Channel selection

•Manual/ automatic

•Threshold/ dimming values

•Battery status

•Visual support during commissioning

6-en

Keypad , ,

•Drive commands

•Manual/automatic mode switching

•Intermediate position I + II

Function button

•Channel selection/ Group selection/ Central command

•Retrieval/setting of thresholds

•Retrieval/setting of rain reaction

Programming button

•Environment scan, as well as selection and programming of receivers

•Add and remove receivers to/from the installation

•Restore factory settings

•Add additional transmitters to the installation

Channel selection/ Group selection/ Central command

The channel of a transmitter can be programmed into one or more receivers.

Only the channels in which receivers are programmed are displayed. One

channel is activated through an individual command, several channels through

a group command or central command.

One group has a maximum of 4 channels and is assigned a colour.

Depending on the model/ specification of the transmitter, several groups can

be selected.

One quarter of the LED ring lights up to indicate each of the individual chan-

nels. A group consists of four channels which are represented by different col-

ours.

If the entire LED ring lights up in one of the group colours, this group is selec-

ted. With the group command, all channels of the selected group are activ-

ated.

If the entire LED ring lights up white, the central command is selected. With the

central command, all channels of all groups are activated.

Channel 1 Channel 2 Channel 3 Channel 4 Group Central

command

7-en

8-channel hand-held transmitter

Channel Group Colour

LED ring

Channel 1 - 4 Group 1 green

Channel 5 - 8 Group 2 red

Channel 1 - 8 Group all

(central command)

White

16-channel hand-held transmitter

Channel Group Colour

LED ring

Channel 1 - 4 Group 1 green

Channel 5 - 8 Group 2 red

Channel 9 - 12 Group 3 yellow

Channel 13 - 16 Group 4 light blue

Channel 1 - 16 Group all

(central command)

White

manual/ automatic

You can display and select the "Manual" or "Automatic" setting by pressing the

STOP button. Only manual drive commands and emergency signals can be

performed with the "Manual" setting. In addition, automatic drive commands

are also performed in the "Automatic" setting. The automatic functions are not

interrupted if a manual drive command is carried out when in automatic mode.

3s Press the STOP button for 3seconds to display

the current status.

Automatic

mode:

The LED ring lights up green.

Manual mode: The LED ring lights up red.

Different

modes:

The LED ring lights up yellow.

8-en

5s You can toggle between manual and automatic

mode by pressing the STOP button for 5seconds.

Battery status

Battery status low

LED ring flashes yellow 4 times following normal

feedback.

Battery status empty

LED ring flashes red 4 times following normal

feedback.

Intermediate position I + II

The intermediate positions I + II are freely selectable positions for the shading

solution between the two limit positions. Each travel button can be assigned

one intermediate position. Both limit positions must be set before an interme-

diate position is set.

Whether or not this function is available depends on the devices used and is

described in the relevant instructions for the receiver.

Thresholds

The function button can be used to retrieve and set thresholds for sensors.

Whether or not this option for setting values is available depends on the

devices used and is described in the relevant instructions for the sensor.

Installation key

All of the devices operating within an installation must have the same installa-

tion key in order to communicate with one another. This key is created on ini-

tial commissioning, and is then transmitted to the additional added devices.

The installation key is only known to the programmed devices, and cannot be

read off. The commissioning procedure is described in the relevant instruc-

tions for the receiver.

9-en

Programming transmitter

Please find the appropriate description in the instructions for the receiver.

Setting the thresholds

Bring the transmitter as close as possible to the

required receiver.

3s Press the programming button for 3seconds. The

transmitter performs a search and the LED ring

continuously changes colour. The transmitter then

switches to receiver selection and selects the re-

ceiver with the best connection quality.

▻

The receiver confirms.

If you do not receive confirmation from the re-

quired receiver, you can press the / button to

toggle between the available receivers until the re-

quired receiver confirms.

▻

The transmitter displays the current as-

signment status of the receiver via the

LED ring.

Assignment status

Lights up yel-

low:

The receiver is not yet part of the

installation or is in the as-de-

livered condition.

Lights up

blue:

The receiver is not assigned to

the selected channel.

Lights up

green:

The receiver is assigned to the

selected channel.

10-en

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Becker Télécommande

Becker

Becker Centronic SunWindControl SWC441A-II Manuel utilisateur

Becker

Becker E01 Series Manuel utilisateur

Becker

Becker Centronic SunWindControl SWC745-II Manuel de la liste des pièces

Becker

Becker P5-16-C01 Manuel utilisateur

Becker

Becker R8/17RP+ Manuel utilisateur

Becker

Becker Centronic SWC441 Manuel utilisateur

Becker

Becker EVO 20 RJ Manuel utilisateur

Becker

Becker P3-30 Manuel utilisateur

Becker

Becker EasyControl EC541A-II Manuel utilisateur

Becker

Becker M05 Manuel utilisateur

Becker

Becker EasyControl EC541A-II Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation