BEC B-WSP1 Manuel utilisateur
1
Wireless Video/Audio
Intercoms
BEC Integrated Solutions —Williamsville, New York —716-689-0871
User Set-Up Guide and
Instructions
2
Table of Contents:
B-WSP1……………………………………………………….Page 3
B-WSP2………………………………………………………Page 8
B-WC2.……………………………………………………….Page 13
B-WI2…………………………………………………………Page 16
5225 Sheridan Drive
Georgetown Square
Williamsville, NY 14221
Phone: 1-716-689-0871
Toll-Free: 1-888-556-3998
Email: support@becsolutionsllc.com
http://www.becintegrated.com
3
Introduction
Congratulations on your purchase of the Wi-Fi Video
Intercom! We pride ourselves in providing reliable, conven-
ient, and secure solutions for your home or business. Please
read this manual thoroughly before using your system.
This Wi-Fi video intercom operates on a 2.4GHz Wi-Fi band,
integrating your iPhone/Android through the “idoorphone”
app, available through the App Store or Google Play.
Product Overview
1. Pairing is quick and easy. Just put the device in pairing
mode and begin a search within the app to connect. No
manual ID or passwords to input.
2. The outdoor station has a magnetic sensor that will
sound an alarm if it is removed from the rain cover.
Password verification is needed to release the door
strike. The outdoor unit intelligently determines what
phone the unlock request is sent from, whether or not
the passcode is correct, and then will unlock the door.
3. All functionality can be accessed through the app. This
includes visitor information, alarm tampering, motion
detection, visitor messages, and unlock functions. The
unit’s recordings and saved images can be downloaded
from anywhere at any time.
Wi-Fi Video Intercom (B-WSP1)
4
Connecting Your Phone
1. Connect the doorbell using provided DC adapter, (red wire to ‘ + ’, black wire to ‘ - ’) then fully insert
into the rain cover. Indicator will blink from red to blue after initial boot is complete, indicating that the
device is in standby mode.
2. Place device into pairing status by using a paperclip or small pin to click the “Reset” button (located on
back) for 5 seconds. Indicator light will blink quickly from blue to red indicating pairing mode.
3. To pair with Android/iOS, open
the application “idoorphone”, tap
“Add Device” and follow the on-
screen directions that appear.
Pairing status will last for 90 seconds on the door station, if pairing fails, doorbell tips “pairing failure”.
4. Once the device is connected to the app, Go to > Settings > WLAN > Scan. Select a network to connect
the doorbell to, and enter the network password. Click “Done”. Doorbell indicator will light blue if con-
nected correctly. After this point, the doorbell’s access point will be hidden.
5. To connect another phone, connect to
the same Wi-Fi network as the door-
bell, and click Add Device in the app.
*iOS devices and some Android devices will not auto connect to
the doorbell’s LAN, in which case you must manually link your
phone to the
doorbell’s
Wi-Fi hotspot.
Android/Play Store iOS/App Store
Wi-Fi Video Intercom (B-WSP1)
5
Using the App —Device Settings
*
Device must be online to adjust doorbell settings
.*
1. User settings: By default, the admin password is “admin”. Revise this password to secure your device.
2. Motion settings: Enable or disable motion detection and adjust desired sensitivity for the door station’s
motion sensor. Recommended setting is ‘High’.
3. Date & Time: Synchronize device’s time with your phone’s mobile time
4. Unlock settings: Revise the unlock password and unlock duration. “Enable Pairing” will set the doorbell
to pairing mode instead of taking the unit off the wall to press the physical button.
5. TF Card (SD Card): Check remaining flash storage available (Maximum supported storage is 32 GB)
6. Device info: Check doorbell software and manually patch to latest version.
Using the App —App Settings
Press “Edit” at the main screen. Here you can delete devices, rename devices, and provide the admin pass-
word for control.
Wi-Fi Video Intercom (B-WSP1)
6
Using the App —Video Surveillance
& Recent Activity
Click “Activity” and all recent actions can be viewed.
Photos/Videos can also be downloaded from here.
Mobile Network Settings (iOS Only)
To enable monitoring even while app is not open, change the following settings:
• Settings > Permission Manager > Notification Center > idoorphone > Enable “Allow Notifications” and
“Priority Display”.
• Settings > Permission Manager > Protected Apps > idoorphone > Enable “Protected”
• Settings > Networked Apps > idoorphone > Enable “Mobile Data” and “WLAN”
Indoor Chime (Optional)
To connect the optional wireless indoor chime, press and hold the two side buttons
“Volume” and “Chime” while simultaneously inserting the (2x) 1.5V AAA batteries into
the unit, the indicator light on the chime will rapidly flash red. Press the dial button on
the door station to complete pairing.
All calls, alarm tampers, motion detection, visitor
messages, and unlocks will trigger the doorbell to
automatically save a picture, that can later be viewed
in the activity feed. Videos of these scenarios can also
be recorded and saved.
Wi-Fi Video Intercom (B-WSP1)
7
Installation
Avoid sheltering or covering the camera’s
light sensor.
Do not install the unit where it can be exposed
to direct sunlight.
Ensure correct wiring is in place according to
the diagram (shown right).
Outdoor camera should be installed about 54”
-66” inches from the ground (4.5’ to 5.5’ ft).
Unlock by Keypad
The default 6-Digit unlock password is included in the box. Please
keep this safe in your records! You may change the unlock pass-
word in “Unlock Settings”.
1. Unlock Door from Phone —Tap the “Unlock” icon in the doorbell
controls and enter your unlock password and click “OK” to con-
firm. A confirmation message will appear when opened.
2. Unlock by Outdoor Unit —Enter the unlock password at the key-
pad and confirm with “#” key. App will notify with a push notifi-
cation that the door is unlocked. If password is incorrect 3
times, app will send a push notification saying “Illegal Unlock”
and an image will be taken and saved. If password is incorrect 5
times, doorbell will lock for 10 minutes.
3. Unlock Functions —The doorbell has a hidden “anti-peeping”
feature. For instance, if the password is 123456, you may enter in xxxxx123456xxxxx and press “#” and
the doorbell will recognize the password within the string of digits.
Wi-Fi Video Intercom (B-WSP1)
8
Introduction
Congratulations on your purchase of the Wireless Wi-Fi Doorbell! We pride ourselves in providing reliable,
convenient, and secure solutions for your home or business. Please read this manual thoroughly before
using your system.
This Wi-Fi video intercom operates on a 2.4GHz Wi-Fi band, integrating your iPhone/Android through the
“idoorphone” app, available through the App Store or Google Play.
Product Overview
1. Pairing is quick and easy. Just put the device in pairing mode and begin a
search within the app to connect. No manual ID or passwords to input.
2. The outdoor station has a magnetic sensor that will sound an alarm if it is
removed from the rain cover. Password verification is needed to release the
door strike. The outdoor unit intelligently determines what phone the unlock
request is sent from, whether or not the passcode is correct, and then will
unlock the door.
3. All functionality can be accessed through the app. This includes visitor information, alarm tampering,
motion detection, visitor messages, and unlock functions. The unit’s recordings and saved images can
be downloaded from anywhere at any time.
Android/Play Store iOS/App Store
Wi-Fi Video Intercom (B-WSP2)
9
Connecting Your Phone
1. Connect the doorbell using provided DC adapter, (red wire to ‘ + ’, black wire to ‘ - ’) then fully insert
into the rain cover. Indicator will blink from red to blue after initial boot is complete, indicating that the
device is in standby mode.
2. Place device into pairing status by using a paperclip or small pin to click the “Reset” button (located
underneath the battery cover) for 5 seconds. Indicator light will blink quickly from blue to red if done
correctly.
3. To pair with Android/iOS, open the application “idoorphone”, click “Add Device” and follow the on-
screen directions that appear. Pairing status will last for 90 seconds on the door station, if pairing
fails, doorbell tips “pairing failure”.
4. Once the device is connected to
the app, Go to > Settings > WLAN >
Scan. Select a network to connect
the doorbell to, and enter the
network password. Click
“Done”. Doorbell indicator will
sound and light blue if connect-
ed correctly. After this point,
the doorbell’s access point will
be hidden.
5. To connect another phone, con-
nect to the same Wi-Fi network
as the doorbell, and click Add
Device in the app.
*iOS devices and some Android devices will not auto connect to
the doorbell’s LAN, in which case you must manually link your
phone to the
doorbell’s
Wi-Fi hotspot.
Wi-Fi Video Intercom (B-WSP2)
10
Wi-Fi Video Intercom (B-WSP2)
Using the App —Device Settings
*
Device must be online to adjust doorbell settings
.*
1. User settings: By default, the admin password is “admin”. Revise this password to secure your device
2. Motion settings: Enable or disable motion detection and adjust desired sensitivity for the door station’s
motion sensor. Recommended setting is ‘High’
3. Date & Time: Synchronize device’s time with our phone’s mobile time
4. Unlock settings: Revise the unlock password and unlock duration. “Enable Pairing” will set the doorbell
to pairing mode instead of taking the unit off the wall to press the physical button.
5. TF Card (SD Card): Check remaining flash storage available (Maximum supported storage is 32 GB)
6. Device info: Check doorbell software and manually patch to latest version.
Using the App —App Settings
Press “Edit” at the main screen. Here you can delete devices, rename devices, and provide the admin pass-
word for control.
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels BEC Système d'interphone
