4
1. Long press power on/off button 1 to switch on unit, the LED below will
show steady blue. Once LED starts flashing, battery has run down and
needs to be recharged. During charging process, LED will show pulsating
and change back steady blue when battery becomes fully charged. To
switch off unit, long press button 1 again.
2. The unit now operates with Auto mode which means the fan speed will be
automatically adjusted according to the environmental condition (PM2.5
index, temperature and humidity). This can ensure the most appropriate
amount of clean air is delivered to baby.
3. Parents can switch to manual mode by short press fan speed button 3 .
The LED below button will light up white. To change fan speed, short press
aaabutton 3 again, the LED intensity will change accordingly. Higher
intensity means higher fan speed. There are total 3 speed for selection.
4. Short press button 1 to switch back to auto mode, the LED below
button will light up steady blue.
5. For baby to enjoy gentle breeze of clean air, short press button 4 to
switch on wind sweeping function. The LED below will light up white. When
baby is newly born, we recommend to keep wind sweeping ON as
continuously blowing air towards baby may impair his breathing. Short
press button 4 again to switch off wind sweeping.
6. The clean air blowing out from outlet 6 is filtered by a composite filter. This
filter has 3 layers. The first layer is active carbon which eliminates all the
bad smell, smoke, VOC and formaldehyde. The second layer filters off
99.5% of H1N1 flu virus and the third layer is a EPA filter that filters off
100% PM2.5 particulates and 99.7% PM1.0 particulates including pollen.
After passing through the filter, it can be sure the air delivered to baby is
purified, free from bad odour and flu virus.
7. Under normal working condition, the air quality indicator 7 will show
pulsating and with colour representing the air quality index. Short press the
night light button 5 can switch indicator 7 to become night light and
the LED below button 5 will light up white. The colour and intensity of
night light can be adjusted via the Bebcare Air app.
Operation
