[ Use Manual ]
05
04 >>
[ 1. Warning ]
Upon installation of this Monitor/DVD player (Unit) into a vehicle, the driver of the vehicle must not
operate this unit by watching videos or playing video games while driving.
Failure to follow this instruction could lead to driver distraction which could result in serious injury or
death to the vehicle’s occupants or persons outside the vehicle and/or property damage.
Several countries and states prohibit the installation of monitors/DVD players if the screen is visible
from the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be
installed so that the screen is visible from the driver’s seat.
When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing
the front passenger seat only. Failure to following this instruction could lead to driver distraction which
could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or
property damage.
This unit is designed so that it might be operated only when the vehicle is in “Park” and the parking brake
is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit
from operating if the vehicle is not in“Park” and/or the parking brake is not fully engaged. When installing
this unit, the installer must connect the parking brake detect wire to the parking brake mechanism in
order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake
detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lock-out feature
could lead to driver distraction which could result in serious injury or death to the driver’s occupants or
persons outside the vehicle and/or property damage.
Once the parking brake lock-out feature is installed, the owner/user must not attempt to disrupt/
neutralize the parking braking brake lock-out feature by (a) partially engaging the parking brake and/
or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure
to follow these instructions could lead to driver distraction which could result in serious injury or death
driver’s occupants or persons outside the vehicle and/or property damage.
When operating this unit, keep the unit’s volume level low enough so that the vehicle’s occupants can
hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction
could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or
persons outside the vehicle and/or property damage.
[ 2. Safety Information ]
Please read all instructions carefully before attempting to install or operate.
Due to its technical nature, it is highly recommended that your G 9 is installed by a professional installer
or an authorized dealer. This product is only for use in vehicles with 12VCD negative ground only.
Safety Notes:
The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety
feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in
Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the
vehicle is in motion.
To prevent damage or injury:
1. Make sure to ground the unit securely to the vehicle chassis ground.
2. Do not remove the top or bottom covers of the unit.
3. Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water
splashing.
4. Do not subject the unit to excessive shock.
5. When replace a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating
may cause the unit to malfunction.
6. To prevent short circuits when replacing a fuse, disconnect the wiring harness rst.
7. Use only the provided hardware and wire harness.
8. You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking
brake.
9. If you experience problems during installation, consult your nearest dealer.
10. If the unit malfunctions, reset the unit as described on manual rst.
If the problem stall persists, consult your nearest dealer or call tech assistance.
11. To clean the monitor, wipe only with a dry silicone cloth or soft cloth.
Do not use a sti cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the
surface of panel and/or remove the painting.
12. When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become
darker than usual. Normal brightness will return after using the monitor for a while.
Additional Notes:
1. When extending the ignition, battery or ground cables, make sure to use automotive-grade cables
or other cables with an area of 0.75mm or more to prevent voltage drops.
2. Do not touch the liquid crystal uid if the LCD is damaged or broken. The liquid crystal uid may be
hazardous to your health or fatal. If the liquid crystal uid from LCD contacts your body or clothing,
wash it o soap immediately.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired
operation.
I_ Before Using
