Beam RST710 Manuel utilisateur

Pole Mount Assembly

1. Feed the cable through the pole

2. Feed the cable through the base plate

3. Connect the antenna cable to the antenna

4. Screw the base to the antenna housing using screws provided

5. Screw the pole into the base to secure the pole to the antenna

Bracket Mounting Assembly

1. Attach the antenna bracket to the base of the antenna housing using the

screws provided

2. Using the “U” bolt provided, the antenna can be affixed to either a horizontal

or pole mount.

Applications

LARGE VESSELS LEISURE CRAFT

Beam Antenna RST710

The antenna can be installed using either a pole mount or bracket mount provided.

4 x Nuts

4 x Small Screws

1 x Antenna Base

1 x Pole

2 x ‘U’ Bolts

1 x Bracket

1 x Antenna

Horizontal Pole

Mount

Vertical Pole

Mount

TRUCK

VEHICLES

For more information on Iridium Antenna Guidelines visit our website at www.beamcommunications.com/antennainstallationguide

1. 2.

Vehicle Antenna Installation

The ideal position for any vehicle-mounted

application is to capitalise on the greatest ground

plane from the surface of the vehicle.

Marine Antenna Installation

The antenna must be installed without obstruction of

other instruments or structures.

The antenna must not be positioned within range of

radar equipment or other RF interference.

Fixed Site Installation

The antenna must be installed without obstruction of

other buildings, chimneys or other structures.

Consideration should also be given to the

surrounding environments such as large trees,

mountains or other buildings.

Installation Guidelines

To ensure maximum performance of the antenna system and to maximise

availability and reliability of service the antenna must;

• have a clear line of site to the sky

• be clear and free of obstructions

• be clear of metal objects

• be located away from other transmitting devices

• be securely affixed in location

• not be located indoors

• be installed in conjunction with a certified cable

Installing Antenna Cables

When installing antenna cables, follow these guidelines:

• Route and restrain cables to prevent them from vibrating or moving under normal conditions,

which could result in damage to the antenna or the coaxial cable connections.

• Wherever the cables contact structures, protect the cables from chafing or abrasion. If a cable needs

to be bent, avoid kinking it, and ensure that each bend radius follows the cable supplier limits.

• Use coaxial sealant, shrink-wrap tubing, electrical tape, or another suitable product to seal all cable

connections appropriately to prevent moisture and corrosion damage from weather exposure.

• Mount all antennas vertically and clear of nearby metal obstructions

• Minimize horizontal obstructions as much as possible because

they can create areas of poor system coverage.

• To minimize the loss of radio signal from the antenna to the terminal, the specific coaxial cable system

between the antenna and the other component should be less than 3db including connector loss.

Preferred Antenna Location

Installation Options

The antenna system is suitable for marine, vehicle and fixed applications and is designed to meet Iridium

System performance requirements when installed according to the instructions in this guide.

The following figure shows typical Installations:

Antenna installation is critical for optimum performance of your Iridium service.

For more information on Iridium Antenna Guidelines visit our website at www.beamcommunications.com/antennainstallationguide

USRMAN003902 - Antenna Instructions

WARNING:

Do not place the antenna anywhere there is a source of heat or fumes such as the ship’s exhaust.

Table des matières

Autres manuels Beam Antenne

Manuels Antenne populaires d'autres marques

Alfa Network

Alfa Network APA-L01 Manuel utilisateur

Naval

Naval PR-422CA Manuel utilisateur

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuel utilisateur

TERK Technologies

TERK Technologies TV44 Manuel utilisateur

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuel utilisateur

HP J8999A Manuel utilisateur

MobilSat

MobilSat MSP-S Manuel utilisateur

Steren

Steren ANT-UHF 13 Manuel utilisateur

Novatel

Novatel 600-G Manuel d'utilisation

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuel utilisateur

TRENDnet

TRENDnet TEW-AO12O Manuel utilisateur

Radio Shack

Radio Shack 15-1837 Manuel utilisateur

CommScope

CommScope CMAX-OMFX-43M-I53 Manuel utilisateur

Ramsey Electronics

Ramsey Electronics DAP25 Manuel utilisateur

COBHAM

COBHAM SAILOR 800 VSAT Manuel d'utilisation et d'entretien

Trango Systems

Trango Systems AD900-9 Manuel utilisateur

Steren

Steren ANT-100 Manuel utilisateur

Proxim

Proxim 5054-PA-23 Manuel utilisateur