BEALE AK140 Manuel utilisateur

USER MANUAL

AK140

61 KEY ELECTRONIC KEYBOARD

INFORMATION FOR YOUR SAFETY

CAUTION

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Unauthorized changes or modication to this system can void the user’s authority to operate this equipment.

The normal function of the product may be disturbed by Strong Electro Magnetic Interference. If so, simply reset the product to resume

normal operation by following the owner’s manual. In case the function could not resume, please use the product in other location.

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe place for future reference.

Power Supply

Please connect the designated AC adaptor to an AC outlet of the correct voltage.

Do not connect the AK140 to an AC outlet of voltage other than that for which the keyboard is intended.

Unplug the AC power adaptor when not using the instrument, or during electrical storms.

Connections

Before connecting the AK140 to other devices, turn o the power to all units. This will help prevent malfunction and/or damage to

other devices.

Location

Do not expose the instrument to the following conditions to avoid deformation, discoloration, or more serious damage:

• Direct sunlight

• Extreme temperature or humidity

• Dusty or dirty locations

• Strong vibrations or shocks

• Close proximity to magnetic elds

Interference with other electrical devices

Radios and televisions placed nearby may experience reception interference. Operate this unit at a suitable distance from radios

and televisions.

Cleaning

Clean only with a soft, dry cloth.

Do not use paint thinners, solvents, cleaning uids, or chemical–impregnated wiping cloths.

Handling

Do not apply excessive force to the switches or controls.

Do not let paper, metallic, or other objects into the AK140. If this happens, unplug the AC adaptor from the wall outlet.

Then have the instrument inspected by qualied service personnel. Disconnect all cables before moving the instrument.

PRECAUTIONS

AK140

Other Function...........................................................................10

Function Menu ..................................................................................10

Mixer...................................................................................................11

Memory.......................................................................................12

Chord Dictionary........................................................................12

Songs ...........................................................................................13

Listening to the songs ......................................................................13

Lesson Mode .....................................................................................13

Song Recording...........................................................................14

MIDI Functions ...........................................................................15

What is MIDI?.....................................................................................15

MIDI Terminals ..................................................................................15

Troubleshooting.........................................................................16

Specications .............................................................................16

Appendices .................................................................................17

Voice List ............................................................................................17

Style List .............................................................................................19

Song List.............................................................................................20

MIDI Implementation Chart............................................................. 21

CONTENTS

Panel & Display Description .......................................................1

Front Panel .......................................................................................... 1

Rear Panel............................................................................................ 1

LCD Display.......................................................................................... 2

Setup .............................................................................................3

Power Supply....................................................................................... 3

Connections..................................................................................4

Connecting a Foot switch................................................................... 4

Connecting Headphones ................................................................... 4

Connecting Audio Equipment ........................................................... 4

Connecting a Computer..................................................................... 4

Playing Demos ................................................................................... 5

Voices ............................................................................................5

Playing Voices...................................................................................... 5

Playing Two Voices Simultaneously–DUAL ...................................... 5

Lower.................................................................................................... 6

Touch.................................................................................................... 6

Sustain.................................................................................................. 6

DSP Eect............................................................................................. 6

Auto Accompaniment..................................................................7

Play Auto Accompaniment................................................................. 7

Playing a Fill ......................................................................................... 7

Intro/Ending......................................................................................... 7

Sync Start ............................................................................................. 8

Fade In/Out.......................................................................................... 8

Tempo .................................................................................................. 8

One Touch Setting .............................................................................. 8

Auto Bass Chord ................................................................................. 9

AK140

1. POWER ON/OFF

Turn the power on or o.

2.MASTER VOLUME

Adjust the master volume.

3. LESSON

Enter Lesson Mode.

4.L/R PART

Select the left/right–hand part

in Lesson Mode.

5.CHORD DICT.

Enter the Chord Dictionary.

6.TEMPO +/–

Change the current tempo.

7. SHIFT

Press and hold to access secondary

functions of other buttons.

8.START/STOP

Start or stop playing the song in

Song Mode. Start or stop playing the

style in Style Mode.

PANEL & DISPLAY DESCRIPTION

REAR PANEL

FRONT PANEL

AK140

11 13 15 1712 14 16 18 19

9.SYNC START

Turn the Sync Start on or o.

10.INTRO/ENDING

Play the Intro or Ending.

11.FILL A

Play the ll–in pattern A.

12.FILL B

Play the ll–in pattern B.

When the SHIFT button is

released

13. FADE IN/OUT

Turn the Fade In or Fade Out on.

14. CHORD

Enter Chord Mode.

15. STORE

panel settings.

16-19. M1–M4

Recall the memory settings.

When the SHIFT button is pressed

13. DSP

Turn the DSP eect on and o.

14. O.T.S.

Enter the One Touch

Setting Mode.

15. RECORD

Start or stop real–time recording.

16. PLAY

Play back the recorded user song.

17. DUAL

Turn the Dual voice on or o.

18. LOWER

Turn the Lower voice on or o.

19. SUSTAIN

Turn the Sustain eect on or o.

1. USB

Connect to a computer.

2. SUSTAIN

Connect a Sustain pedal.

3. PHONE

Connect a pair of headphones.

4. DC IN

Connect DC IN power adaptor (optional).

21 3 4

FRONT PANEL

AK140

20. FUNCTION

Enter the Function Menu.

21. MIXER

Adjust the master volume.

22. METRONOME

Turn the metronome on and o.

23. TOUCH

Turn the Touch response on

and o.

1. A.B.C.

2. FADE

3. DUAL

4. LOWER

5. DSP

6. TOUCH

7. SUSTAIN

8. MODULATION

24. VOICE

Enter the Voice Mode.

25. STYLE

Enter the Style Mode.

24+25DEMO

Pressing the VOICE and STYLE

buttons simultaneously will

start the DEMO playback.

9. CHORD

10.

VOICES/STYLE/DEMO/SONG

11. TEMPO/COUNT

12. BEAT

13. STORE M1–M4/

ONE TOUCH SETTING

14. RECORD

15. NOR/VAR

26. SONG

Enter the Song Mode.

27. +, –, NUMBER KEYS

Select the number or set

parameter value.

16. BASS CLEF

17. TREBLE CLEF

18. USB CABLE

19. LEFT

20. RIGHT

21. LESSON 1/2/3

22. 61–KEY KEYBOARD

2524

LCD DISPLAY

AK140

SETUP

You can power the AK140 either by batteries or by using a power

adaptor. Follow the instructions described below.

Using Batteries

Insert 6x AA size (SUM–3 or Lr6) or equivalent alkaline batteries

into the battery compartment.

1. Open the battery compartment cover located on the

bottom of the AK140.

2. Insert the batteries. Ensure that you follow the polarity

markings on the cabinet.

3. Replace the compartment cover and ensure that it locks

rmly in place

Caution:

• Do not mix used and new batteries.

• Always use batteries of the same type.

• Always remove the batteries from the AK140 when it is not

being used for an extended period of time.

Using the Power Adapter

1. Please ensure the POWER ON/OFF switch of the

AK140 is set to OFF.

2. Connect the AC adaptor to the power supply jack.

3. Plug the AC adaptor into an AC outlet. This will

automatically cut o the battery power supply.

4. Turn on the AK140.

Note:

• When the keyboard is not in use or during

a thunderstorm, please disconnect the power for

safety purposes.

• The keyboard will automatically shutdown to preserve power

if not used for 30 minutes.

This section contains information about setting up the AK140 and preparing to play. Please read this section carefully before turning

the power on.

POWER SUPPLY

AK140

CONNECTIONS

CONNECTING A FOOT SWITCH

An optional foot switch can be plugged into the sustain jack and be

used to switch sustain on or o. By pressing a sustain foot switch,

you will ensure that you have a natural sustain as you play.

CONNECTING HEADPHONES

A standard pair of stereo headphones can be connected to the

PHONES jack for private practice or late–night playing. The internal

stereo speaker system is automatically shut o when a pair of

headphones is plugged into this jack.

Note:

Do not listen with the headphones at high volume for long periods

of time. Doing so may cause hearing loss.

CONNECTING AUDIO EQUIPMENT

The PHONES jack can also be connected to audio equipment, such

as ampliers, mixers, recorders, etc.

Note:

To avoid damaging the speakers, make sure the volume has been

set to the minimum level before connecting the power and other

devices.

CONNECTING A COMPUTER

Use a USB cable to connect the AK140 to a computer.

The AK140 receives and transmits MIDI messages via the

USB connector.

AK140

The AK140 features 100 demo songs.

1. Press the [STYLE] and [VOICE] buttons simultaneously

to start playing the demo.

2. Select a demo song.

Use the data dial, the number keys, the [+] button or the

[–] button to select the desired demo song.

3. Adjust the volume with the [VOLUME] knob.

4. Press the [STYLE] and [VOICE] buttons simultaneously

again or press the [START/STOP] button to stop playing

and exit the demo mode.

Note:

In the DEMO mode, all buttons except START/STOP, TEMPO+,

TEMPO–, +, –, DSP, VOLUME, POWER ON/OFF will not be available.

PLAYING DEMOS

VOICES

PLAYING VOICES

1. Press the [VOICE] button.

Enter the VOICE mode. The LCD will display “VOICE 1”,

and display the current voice name and number.

2. Select a voice.

Use the number keys, the [+] button or the [–] button

to select the voice you want to play.

3. Play the voice.

You can play the keyboard and listen to the voice.

Note:

In the DEMO mode, all buttons except START/STOP, TEMPO+,

TEMPO–, +, –, DSP, VOLUME, POWER ON/OFF

will not be available.

1. Hold down the [SHIFT] button and press the [DUAL]

button to turn the function on. The LCD will display “VOICE

2” and display the dual voice number.

2. Selecting a voice for VOICE 2.

Use the data dial, the number keys, the [+] button or the

[–] button to select the desired dual voice.

3. Play the voices.

You will hear two dierent voices layered together, just

like two instruments playing at the same time.

The AK140 has 320 remarkably realistic built–in voices, including Piano, Woodwind, Saxophone, Drum Kits and many more.

Please refer to Voice List.

PLAYING TWO VOICES SIMULTANEOUSLY–DUAL

AK140

LOWER

The lower function splits the keyboard into the left and the right

hand areas, each with a dierent voice. The left hand voice is the

lower voice “VOICE L”.

The default split point is #F3.

1. Hold down the [SHIFT] button and press the [LOWER]

button to turn on the LOWER VOICE. The LCD will display

the “LOWER VOICE” icon and display “VOICE L” and its

number. When you play in real time, you can activate Split

Mode simply by pressing this button.

2. Press [+]/[–] button, or numeric buttons to select the

voice you want.

TOUCH

The keyboard is equipped with a touch response feature that

lets you dynamically and expressively control the level of the

voice with your playing strength just like on an acoustic instrument.

Press the [TOUCH] button to adjust the touch parameter: OFF,

1, 2, 3. Press [+] and [–] buttons simultaneously to restore its

default value.

SUSTAIN

When the Sustain feature is ON, all notes played on the keyboard

will have a longer sustain. Hold down the [SHIFT] button and then

press the [SUSTAIN] button to turn the SUSTAIN eect ON or OFF.

Note:

When you step on the “sustain pedal”, the sustain eect is stronger

than the eect by pressing the [SUSTAIN] button.

The DSP simulates sounds in the real environment. With the DSP

eect, you can add ambiance and depth to your performance.

The DSP eect is set to ON when you turn on the AK140. Hold

down the [SHIFT] button and then press the [DSP] button to turn

on or o the DSP eect.

DSP EFFECT

AK140

AUTO ACCOMPANIMENT

1. Press the [STYLE] button.

Enter the STYLE mode. The LCD will display “STYLE” and

the style number.

2. Use the number keys, the [+] button or the [–] button to

select the style you want to play.

3. Press the [START/STOP] button to start the rhythm

tracks of the auto accompaniment.

Auto ll in function automatically adds a ll to your performance.

When the ll–in is nished, the accompaniment shifts to the Main

section (A, B).

Note:

By holding down the FILL–IN A/B button when the style is playing,

the selected FILL pattern repeats continuously until the button

is released. Press FILL–IN A/B when the style has stopped, it will

change to the normal section.

The intro is an opening section of the song. Each preset style features

two dierent patterns. When the intro pattern is nished, the system

will automatically shift to the main section. Ending is used for the

ending of the song. When the ending is nished, accompaniment

automatically stops. The length of the ending diers depending on

the selected style.

1. Press the [STYLE] button.

2. Select a style.

3. Turn the Chord Mode on.

4. Turn SYNCHRONIZED START on.

5. By pressing the [INTRO/ENDING], the “VAR” ashes on the

LCD. The style is ready to play.

6. It will start the accompaniment as soon as you start playing

in the Chord section. When the playback of the intro is

nished, it automatically leads into main A or B section.

7. Pressing the [INTRO/ENDING] again will lead it into the

ending section. When the ending is nished, the auto

accompaniment automatically stops.

Note:

Pressing [FILL A] or [FILL B] before the ending nishes will lead it

into main A or main B section.

The AK140 features 110 styles of dierent musical genres. Try selecting some of the dierent styles (refer to Style List) and play

with the auto accompaniment.

PLAY AUTO ACCOMPANIMENT

PLAY A FILL

INTRO/ENDING

AK140

Table des matières

Manuels Clavier électronique populaires d'autres marques

Casio

Casio LK-50 Guide de configuration

Casio

Casio VZ-1 Guide de dépannage

Casio

Casio Privia PX-100 Manuel utilisateur

Yamaha

Yamaha PortaTone PSR-225GM Manuel utilisateur

Behringer

Behringer U-CONTROL UMX49 Manuel utilisateur

Yamaha

Yamaha Portatone X2500 Manuel utilisateur

Yamaha

Yamaha Portatone PSR-100 Manuel utilisateur

Casio

Casio WK-1600 Manuel utilisateur

Keith McMillen Instruments

Keith McMillen Instruments K-Board Pro 4 Fiche technique

Yamaha

Yamaha PortaSound PCS-30 Manuel utilisateur

Roland

Roland Juno-6 Manuel utilisateur

McGrey

McGrey 6170 Manuel utilisateur

Yamaha

Yamaha PortaTone PSR-41 Manuel utilisateur

HDC

HDC Kurzweil KP300X Manuel utilisateur

Casio

Casio Celviano AP-45 Manuel utilisateur

Akai

Akai MPK88 Manuel utilisateur

Waldorf

Waldorf IRIDIUM Manuel utilisateur

Yamaha

Yamaha NP-30 Instructions de montage