BE WHIRL-A-WAY Manuel utilisateur
operation manual
Model #
85.403.014
14”
WHIRL-A-WAY
85.403.014 Manual Curtis Dec 9 2014.indd 1 11/13/2015 8:02:51 AM
2
85.403.014 Manual Curtis Dec 9 2014.indd 2 11/13/2015 8:02:51 AM
3
Introduction
4 Using the Operator’s Manual
Product Identification
5 Record Identification Numbers
Pre-Operating Instructions
6 Before You Begin
6 Intended Use
6 Care
Operating
7 Operating
Recommended Applications
7 Use with a Gun and Lance
7 Attach to Long Wand
Parts List
8 Parts List
Warranty
9 Warranty
table of contents
85.403.014 Manual Curtis Dec 9 2014.indd 3 11/13/2015 8:02:51 AM
4
Using the Operator’s manual
The operating manual is an important part of your 14” Whirl-A-Way and
should be read thoroughly before initial use, and referred to often to make
sure adequate safety and service concerns are being addressed.
Reading the owner’s manual thoroughly will help avoid any personal injury
or damage to your Whirl-A-Way. The information in this manual will offer
you the most effective tools for cleaning as well as the safest. By knowing
how best to operate this machine you will be better positioned to show
others who may also operate the unit.
This manual contains information for the complete range of BE Whirl-A-
Ways, and is placed in order starting from the safety requirements to the
operating functions of your pump. You can refer back to the manual at any
time to help troubleshoot any specific operating functions, so store it with
the machine at all times.
Attention: Read through the complete
manual prior to the initial use of your
Whirl-A-Way.
introduction
85.403.014 Manual Curtis Dec 9 2014.indd 4 11/13/2015 8:02:51 AM
5
product identification
Record Identication Numbers
14” Whirl-A-Way
If you need to contact an Authorized Dealer or Customer Service line
(1-866-850-6662) for information on servicing, always provide the product
model and identification numbers.
You will need to locate the model and serial number for the pump and
record the information in the places provided below.
Date of Purchase:
Dealer Name:
Dealer Phone:
Product Identication Numbers
Model Number:
85.403.014 Manual Curtis Dec 9 2014.indd 5 11/13/2015 8:02:51 AM
6
WARNING
This product uses extreme water pressure and water force. This may
cause kickback when using the cleaner.
Pre-Operating Instructions
Before You Begin
Prior to initial operation of the unit carefully read the information
outlined in the operation instructions.
• Ensure that all components are in good working order and that they
operate safely.
• Do not use cleaner if any part is not in proper working condition.
• No modifications permitted on the machine.
• Before operation test the cleaner at low pressure (1500 PSI) to ensure you
can operate safely at high pressures.
Intended Use
The Whirl-A-Way is suitable for cleaning floors and walls in conjunction
with a high pressure cleaner.
(A) Recommend Operating pressure: 2000-3600 PSI
(B) Maximum pressure: 4000 PSI
(C) Maximum water temperature: 85°C/180°F
• Never exceed maximum operating pressure and temperature.
pre-operating instructions
The surface Cleaning System you have purchased connects directly to a
1/4” quick connect coupler, operating to a maximum of 4000 PSI.
This 14” Whirl-A-Way is designed to operate with cold water pressure
washers. We do not recommend the use of hot water as the nylon brush
skirt will soften and wear prematurely, voiding any warranty.
Before operation ensure that the pressure washer is on low pressure when
first using the Whirl-A-Way. Adjust pressure with adjustable unloader.
Please dispose of packaging environmentally responsibly
The packaging materials are recyclable. Please do not throw the packaging
in the household rubbish but take it to a recycling centre.
Care
•Protect from frost/ freezing.
•Ensure bristles are not deformed during storage.
85.403.014 Manual Curtis Dec 9 2014.indd 6 11/13/2015 8:02:51 AM
7
WARNING
Nozzle has been set according to factory set alignment.
operating
Operating
Never reach under the unit while the high-pressure cleaner is operating
• Never direct the 14” Whirl-A-Way at humans or animals.
• Do not operate on a ladder.
During operation, should you experience a buildup of small stones or other
foreign material within the cover, we recommend that you simply tip the
cleaner on its side at 45° which should expel any foreign materials. This
extend the life of your tips and swivel arm. The tips that have been installed
on your surface cleaning system permit the use of your cleaner with a
pressure washer producing up to 4 GPM at 4000 PSI. This unit will not
spin efficiently with pressure under 2.3 GPM. Periodically check the tips
to ensure they are not plugged by dirt particles. It is very important when
operating your 14” Whirl-A-Way, that you maintain a continuous motion.
Should you leave the cleaner in a stationary position, the surface being
cleaned can be seriously damaged by the high pressure.
Recommended Applications
use with a gun and lance
Connect to lance using q/c fittings on the lance and 14” Whirl-A-Way.
For 4GPM, use #020 nozzle
Attach to long wand
Attach to a longwand for cleaning hard to reach surfaces. Connect to
longwand using the QC fittings on the longwand and 14” Whirl-A-Way.
85.403.014 Manual Curtis Dec 9 2014.indd 7 11/13/2015 8:02:51 AM
8
parts list
C
A
Parts List
A. 85.792.037 - brush skirt
B. 85.790.037 rotary head
C. 85.791.037 - rotary arm
B
85.403.014 Manual Curtis Dec 9 2014.indd 8 11/13/2015 8:02:53 AM
9
warranty
Warranty
The rotary head has a six-month warranty from the date of purchase.
Should you encounter problems with the rotary head within that time
period, contact the place of purchase for RGA and return with authorized
RGA.
There is no warranty on the nylon brush ring.
All other components of the surface cleaning system have a 30-day
replacement warranty against manufacturer’s defects only.
85.403.014 Manual Curtis Dec 9 2014.indd 9 11/13/2015 8:02:53 AM
10
If you need assistance with the
assembly or operation of this
Whirl-A-Way please call
1-866-850-6662
85.403.014 Manual Curtis Dec 9 2014.indd 10 11/13/2015 8:02:53 AM
Table des matières
