BCM ECM-WHL Manuel utilisateur

Part No. E2047394603R

ECM-WHL

8th Gen Intel® Whiskey Lake 3.5”Micro Module

User’s Manual

4th Ed –12 October 2020

ECM-WHL User’s Manual

FCC Statement

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS

FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST

HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A

COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN

RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE

HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO

CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

Notice

This guide is designed for experienced users to setup the system within the shortest time.

For detailed information, please always refer to the electronic user's manual.

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described

product(s), conveys no license or title under any patent, copyright, or masks work rights

to these products, and makes no representations or warranties that

2 ECM-WHL User’s Manual

ECM-WHL User’s Manual

User’s Manual

these products are free from patent, copyright, or mask work right infringement, unless

otherwise specified. Applications that are described in this manual are for illustration

purposes only. We make no representation or warranty that such application will be

suitable for the specified use without further testing or modification.

Life Support Policy

OUR PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE

SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL.

As used herein:

1. Life support devices or systems are devices or systems which, (a) are intended for

surgical implant into body, or (b) support or sustain life and whose failure to perform,

when properly used in accordance with instructions for use provided in the labeling, can

be reasonably expected to result in significant injury to the user.

2. A critical component is any component of a life support device or system whose

failure to perform can be reasonably expected to cause the failure of the life

support device or system, or to affect its safety or effectiveness.

A Message to the Customer

Customer Services

Each and every product is built to the most exacting specifications to ensure reliable

performance in the harsh and demanding conditions typical of industrial

environments. Whether your new device is destined for the laboratory or the factory floor,

you can be assured that your product will provide the reliability and ease of operation.

Your satisfaction is our primary concern. Here is a guide to our customer services. To

ensure you get the full benefit of our services, please follow the instructions below

carefully.

Technical Support

We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For the most frequently asked questions, you can

easily find answers in your product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone. So please consult the user’s manual

first.

4 ECM-WHL User’s Manual

ECM-WHL User’s Manual

Product Warranty

We warrant to you, the original purchaser, that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized,or which have been subject to misuse,

abuse, accident or improper installation. We assume no liability under the terms of

this warranty as a consequence of such events. Because of our high quality-control

standards and rigorous testing, most of our customers never need to use our repair

service. If any of our products is defective, it will be repaired or replaced at no charge

during the warranty period. For out-of-warranty repairs, you will be billed according to the

cost of replacement materials, service time, and freight. Please consult your dealer for

more details. If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example,

CPU type and speed, our products model name, hardware & BIOS

revision number, other hardware and software used, etc.) Note anything

abnormal and list any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information available.

3. If your product is diagnosed as defective, obtain an RMA (return material

authorization) number from your dealer. This allows us to process your good

return more quickly.

4. Carefully pack the defective product, a complete Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales

receipt) in a shippable container. A product returned without proof of the

purchase date is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it

prepaid to your dealer.

User’s  Manual 
ECM-WHL User’s  Manual 
 

 
Content
Getting Started............................................................................................................8 
1 Safety Precautions....................................................................................................8 
2 Packing List...............................................................................................................8 
3 Document Amendment History .................................................................................9 
4 Manual Objectives...................................................................................................10 
5 System Specifications.............................................................................................11 
6 Architecture Overview—Block Diagram..................................................................14 
Hardware Configuration...........................................................................................15 
1 Product Overview....................................................................................................16 
2 Jumper and Connector List.....................................................................................17 
3 Setting Jumpers & Connectors ...............................................................................19 
3.1 Serial port 1 pin9 signal select (JRI1) ............................................................................................ 19 
3.2 Clear CMOS (JBAT1)..................................................................................................................... 19 
3.3 LCD backlight brightness adjustment (JBKL_SEL1)...................................................................... 20 
3.4 AT/ATX Input power select (JAT1)................................................................................................. 20 
3.5 LCD inverter connector (JBKL1) .................................................................................................... 21 
3.6 CPU fan connector (CPU_FAN1)................................................................................................... 21 
3.7 Serial port 1 connector (JCOM1) ................................................................................................... 22 
3.8 General purpose I/O connector (JDIO1) ........................................................................................ 22 
3.9 SATA Power connector (SATA_PWR1)......................................................................................... 23 
3.10 Power connector (PWR1).......................................................................................................... 23 
3.11 LVDS connector (JLVDS1)........................................................................................................ 24 
3.12 USB2.0 connector (JUSB1)....................................................................................................... 25 
3.13 SPI connector (JSPI1) ............................................................................................................... 25 
3.14 EC Debug connector (JEC_ROM1)........................................................................................... 26 
3.15 Battery connector (BAT1) .......................................................................................................... 26 
3.16 LPC connector (JLPC1)............................................................................................................. 27 
3.17 Front Panel connector (JFP1).................................................................................................... 27 
3.18 PC Buzzer connector (JBZ1)..................................................................................................... 28 
4 Cooler Installation ...................................................................................................29 
5 Heatsink/Heat spreader Installation ........................................................................30 
BIOS Setup....................................................................................................................31 
1 Introduction .............................................................................................................32 
2 Starting Setup .........................................................................................................32 
3 Using Setup ............................................................................................................33 
4 Getting Help............................................................................................................34 

ECM-WHL User’s Manual 
ECM-WHL User’s Manual 
 
5 In Case of Problems................................................................................................34 
6 BIOS setup..............................................................................................................35 
6.1 Main Menu...................................................................................................................................... 35 
6.1.1 System Language.................................................................................................................. 36 
6.1.2 System Date.......................................................................................................................... 36 
6.1.3 System Time.......................................................................................................................... 36 
6.2 Advanced Menu ............................................................................................................................. 36 
6.2.1 Connectivity Configuration..................................................................................................... 37 
6.2.1.1 WWAN Configuration ............................................................................................................ 38 
6.2.2 CPU Configuration................................................................................................................. 38 
6.2.3 Power & Performance ........................................................................................................... 39 
6.2.3.1 CPU –Power Management Control...................................................................................... 40 
6.2.3.2 GT –Power Management Control......................................................................................... 42 
6.2.4 PCH-FW Configuration.......................................................................................................... 43 
6.2.4.1 Firmware Update Configuration............................................................................................. 43 
6.2.5 Trusted Computing................................................................................................................ 44 
6.2.6 APCI Settings ........................................................................................................................ 45 
6.2.7 IT8528 Super IO Configuration.............................................................................................. 46 
6.2.7.1 Serial Port 1 Configuration .................................................................................................... 46 
6.2.8 HW Monitor............................................................................................................................ 47 
6.2.9 S5 RTC Wake Settings.......................................................................................................... 47 
6.2.10 Serial Port Console Redirection ............................................................................................ 48 
6.2.10.1 Legacy Console Redirection Settings ................................................................................... 48 
6.2.11 USB Configuration................................................................................................................. 49 
6.2.12 Network Stack Configuration................................................................................................. 50 
6.3 Chipset.......................................................................................................................................... 50 
6.3.1 System Agent (SA) Configuration.......................................................................................... 51 
6.3.1.1 Memory Configuration ........................................................................................................... 51 
6.3.1.2 Graphics Configuration.......................................................................................................... 52 
6.3.2 PCH-IO Configuration............................................................................................................ 53 
6.3.2.1 PCI Express Configuration .................................................................................................... 53 
6.3.2.2 SATA And RST Configuration ............................................................................................... 57 
6.3.2.3 HD Audio Configuration......................................................................................................... 65 
6.3.3 Board & Panel Configuration................................................................................................. 66 
6.4 Security......................................................................................................................................... 67 
6.4.1 Secure Boot........................................................................................................................... 68 
6.4.1.1 Key Management..................................................................................................................... 69 
6.5 Boot .............................................................................................................................................. 70 
6.6 Save and exit................................................................................................................................ 71 
6.6.1 Save Changes and Reset...................................................................................................... 71 

User’s Manual

ECM-WHL User’s Manual

3.6.6.2 Discard Changes and Reset.................................................................................................. 71

3.6.6.3 Restore Defaults.................................................................................................................... 72

3.6.6.4 Launch EFI Shell from filesystem device .............................................................................. 72

4. Drivers Installation.......................................................................................................73

4.1 Install Chipset Driver...............................................................................................74

4.2 Install ME Driver......................................................................................................75

4.3 Install VGA Driver....................................................................................................76

4.4 Install Audio Driver (For Realtek ALC892) ..............................................................78

4.5 Install Ethernet Driver..............................................................................................79

4.6 Install HDMI_CEC Driver ........................................................................................81

4.7 Install IRST Driver...................................................................................................83

5. Mechanical Drawing ....................................................................................................85

ECM-WHL User’s Manual

8 ECM-WHL User’s Manual

1. Getting Started

1.1 Safety Precautions

Warning!

Always completely disconnect the power cord from your

chassis whenever you work with the hardware. Do not

make connections while the power is on. Sensitive

electronic components can be damaged by sudden power

surges. Only experienced electronics personnel should

open the PC chassis.

Caution!

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution,

use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded

bag when they are not in the chassis.

1.2 Packing List

Before you begin installing your single board, please make sure that the

following materials have been shipped:

1 x 3.5” ECM-WHL Micro Module

1 x Cable set contains the followings:

—1 x Serial ATA cable (7-pin, standard)

—1 x Wire SATA power cable (15-pin,2P/2.0mm)

—1 x Flat cable 9P(M)-PHD 10P/2.0mm)

3M foam (VHB-4622 10mm*20mm*1.1mm)

1 x CPU Cooler (128*75.6*37.5mm)

User’s Manual

ECM-WHL User’s Manual

1.3 Document Amendment History

Revision

Date

Comment

1st

October 2019

Initial Release

2nd

February 2020

Update 2.3.4 JAT1

3rd

April 2020

Add 2.5 Heatsink/Heat spreader Installation

4th

October 2020

Update 2.3.4 JAT1

ECM-WHL User’s Manual

10 ECM-WHL User’s Manual

1.4 Manual Objectives

We have tried to include as much information as possible but we have not duplicated

information that is provided in the standard IBM Technical References, unless it proved to

be necessary to aid in the understanding of this board.

We strongly recommend that you study this manual carefully before attempting to set

up ECM-WHL or change the standard configurations. Whilst all the necessary

information is available in this manual we would recommend that unless you are

confident, you contact your supplier for guidance.

Please be aware that it is possible to create configurations within the CMOS RAM that

make booting impossible. If this should happen, clear the CMOS settings, (see

the description of the Jumper Settings for details).

If you have any suggestions or find any errors regarding this manual and want to inform us

of these, please contact our Customer Service department with the relevant details.

Table des matières

Autres manuels BCM Ordinateur monocarte

BCM

BCM EBC-3615 Manuel utilisateur

BCM

BCM ECM-3455J Manuel utilisateur

BCM

BCM BI250-945GSE Manuel utilisateur

BCM

BCM ESM-APLM Manuel utilisateur

BCM

BCM MX57QM Manuel utilisateur

Manuels Ordinateur monocarte populaires d'autres marques

WIN Enterprises

WIN Enterprises PL-80910 Manuel utilisateur

AXIOMTEK

AXIOMTEK SBC81206 Series Manuel utilisateur

Embest

Embest SOM-PH8800 Manuel utilisateur

SeaLevel

SeaLevel SBC-R9 Manuel utilisateur

SMART Embedded Computing

SMART Embedded Computing ATCA-8310 Manuel utilisateur

WinSystems

WinSystems PPM-LX800-G Manuel utilisateur

GIGAIPC

GIGAIPC QBiX-PPC Series Manuel utilisateur

OLIMEX

OLIMEX A10S-OLinuXino-MICRO Manuel utilisateur

Commell

Commell FS-978 Manuel utilisateur

GIGAIPC

GIGAIPC QBiP-8665A/ Manuel utilisateur

VersaLogic

VersaLogic Python EBX-11 Manuel utilisateur

Micro Computer Specialists

Micro Computer Specialists IRV-3702 Manuel utilisateur

CompuLab

CompuLab SB-A510 Manuel utilisateur

Boser

Boser HS-7321 Manuel utilisateur

Premier Farnell

Premier Farnell Embest SBC8530 Manuel utilisateur

MicroSys Electronics

MicroSys Electronics miriac SBC-LS1043A2 Manuel utilisateur

Aaeon

Aaeon UP Manuel utilisateur

Portwell

Portwell WUX Series Manuel utilisateur