BCM Advanced Research OFT10W-3455J Manuel utilisateur
OFT10W-3455J User’s Manual
1
OFT10W-3455J
Intel® J3455 SoC
User’s Manual
Edition 1.01 – Nov, 2022
OFT10W-3455J User’s Manual
2
FCC Statement
THIS DEVICE SUPPORTS PART 15 FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS "A" DIGITAL DEVICE,
PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE
EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE
RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL,
MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH
CASE THE USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Notice
This guide is designed for experienced users to setup the system within the shortest time. For detailed
information, please always refer to the electronic user's manual.
Copyright Notice
Copyright 2022 BCM Advanced Research, ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form or by any
means, electronic or mechanical, for any purpose, without the prior written permission of the original
manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners.
OFT10W-3455J User’s Manual
3
Disclaimer
BCM Advanced Research reserves the right to make changes, without notice, to any product, including
circuits and/or software described or contained in this manual in order to improve design and/or
performance. BCM Advanced Research assumes no responsibility or liability for the use of the described
product(s), conveys no license or title under any patent, copyright, or masks work rights to these products,
and makes no representations or warranties that these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified. Applications that are described in this manual are for
illustration purposes only. BCM Advanced Research makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Life Support Policy
BCM Advanced Research PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE
SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL OF BCM Advanced
Research.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into
body, or (b) support or sustain life and whose failure to perform, when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in significant injury to
the user.
2. A critical component is any component of a life support device or system whose failure to perform can
be reasonably expected to cause the failure of the life support device or system, or to affect its safety
or effectiveness.
OFT10W-3455J User’s Manual
4
A Message to the Customer
BCM Customer Services
Each and every BCM product is built to the most exacting specifications to ensure reliable performance in
the harsh and demanding conditions typical of industrial environments. Whether your new BCM device is
destined for the laboratory or the factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name BCM has come to be known.
Your satisfaction is our primary concern. Here is a guide to BCM customer services. To ensure you get the
full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into technical difficulties,
we are here to help. For the most frequently asked questions, you can easily find answers in your product
documentation. These answers are normally a lot more detailed than the ones we can give over the phone.
So please consult the user’s manual first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.bcmcom.com.
If you still cannot find the answer, gather all the information or questions that apply to your problem, and
with the product close at hand, call your dealer. Our dealers are well trained and ready to give you the
support you need to get the most from your BCM products. In fact, most problems reported are minor and
are able to be easily solved over the phone.
In addition, free technical support is available from BCM engineers every business day. We are always
ready to give advice on application requirements or specific information on the installation and operation of
any of our products. Please do not hesitate to call or e-mail us.
BCM Advanced Research
11 Chrysler,
Irvine, California, 92618
USA
Tel : +1-949-470-1888
http://www.bcmcom.com
E-mail: [email protected]
OFT10W-3455J User’s Manual
5
Product Warranty
BCM warrants to you, the original purchaser, that each of its products will be free from defects in materials
and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by persons other than
repair personnel authorized by BCM, or which have been subject to misuse, abuse, accident or improper
installation. BCM assumes no liability under the terms of this warranty as a consequence of such events.
Because of BCM high quality-control standards and rigorous testing, most of our customers never need to
use our repair service. If any of BCM products is defective, it will be repaired or replaced at no charge
during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of
replacement materials, service time, and freight. Please consult your dealer for more details. If you think
you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU type and speed, BCM
products model name, hardware & BIOS revision number, other hardware and software used, etc.)
Note anything abnormal and list any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product, and any helpful
information available.
3. If your product is diagnosed as defective, obtain an RMA (return material authorization) number from
your dealer. This allows us to process your good return more quickly.
4. Carefully pack the defective product, a complete Repair and Replacement Order Card and a
photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product
returned without proof of the purchase date is not eligible for warranty service.
Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.
OFT10W-3455J User’s Manual
6
Manual Objectives
This manual describes in detail of BCM OFT10W-3455J System.
We strongly recommend that you study this manual carefully before attempting to interface with this
mainboard or change the standard configurations. Whilst all the necessary information is available in this
manual we would recommend that unless you are confident, you contact your supplier for guidance.
Please be aware that it is possible to create configurations within the CMOS RAM that make booting
impossible. If this should happen, clear the CMOS settings, (see the description of the Jumper Settings for
details).
If you have any suggestions or find any errors concerning this manual and want to inform us of these,
please contact our Customer Service department with the relevant details.
Safety Precautions
Warning!
Always completely disconnect the power cord from your chassis whenever you
work with the hardware. Do not make connections while the power is on. Sensitive
electronic components can be damaged by sudden power surges. Only
experienced electronics personnel should open the PC chassis.
Caution!
Always ground yourself to remove any static charge before touching the
mainboard. Modern electronic devices are very sensitive to static electric charges.
As a safety precaution, use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded bag when they are not
in the chassis.
Document Amendment History
Revision
Date Comment
1st (1.00) Jul, 2022 Initial Release
2nd (1.01)
Nov, 2022 Updated Release
OFT10W-3455J User’s Manual
7
Mainboard Specifications
Model MX310H
Processor/ Chipset Intel® J3455 SoC (1.5GHz Base Frequency, 2.3GHz Burst Frequency)
Memory One 204-pin SODIMM DDR3L-1600Mhz (PC3-12800) slot supports up to 8GB Max
Display Intel® Integrated HD Graphic Engine
Maximum Resolution HDMI: 3840 x 2160 @ 30Hz
LVDS: 1920x1200 @ 60Hz
Note: The max resolution could be lower which is limited by the type of monitor or
LVDS panel connected.
SATA 1 x SATA III connector
Expansion Slots 1 x mSATA/Mini-PCIe Slot
1 x M.2 Type E 2230 (with USB & PCIe x1) for wifi module
1 x uSIM Slot
USB 4 x USB 3.0 ports (2x stack-up @ Rear I/O)
4 x USB 2.0 ports (2x Header)
(“F_USB2” header port 0 (USB set on pin 2, 4, 6, 8, 10 only) supports Dual Role
(OTG) when BIOS “XDCI Support” is set at “Device Mode”).
Super I/O Controller Nuvoton® NCT6126D
Serial Ports 1 x RS-232/ Ring-In (1x 2.0mm Locking Type Header) (with Voltage Selection)
1 x RS-232/ RS-422/ RS-485/ Ring-In/ (1x 2.0mm Locking Type Header) (with
Voltage Selection)
LVDS 18/24bits Dual Channel LVDS through Chrontel® CH7511B
Watch Dog Timer 1sec ~ 255 min timer
HW Monitor Yes
Audio
Realtek® ALC255
HD Audio Codec with auto jack sensing
LAN
Realtek® RTL8111H PCIe Gigabit LAN
1 x 10/100/1000 LAN Port
Realtek® RTL8111H PCIe Gigabit LAN
1 x 10/100/1000 LAN Port
BIOS
AMI® UEFI BIOS
AMI BIOS with 64Mb SPI ROM
TPM 1 x TPM 2.0 Security Device (Infineon® SLB9665TT-2.0)
OFT10W-3455J User’s Manual
8
Onboard I/O Headers
SATA 1 x Std. SATA III Connector
1 x SATA Power Header
MSATA_MPCIE Supports mSATA SSDs
M2_E Supports E-Key WIFI modules3 (Supports WIFI Cards in 2230 Only)
U_SIM Supports uSIM card
USB 2 x USB2.0 Header (2 ports/header)
COM Port 2 x Header
Front Audio 1 x Header (supports 4 ohms/ 2W speaker)
Front Panel 1 x Header
Fan Header 1 x Headers (12V, 4-pins)
LVDS
1 x Header for LVDS Panel Connection
1 x Header for LVDS Panel Backlight Control
SMBUS 1 x Header
I2C 1 x Header
SPI 1 x Header
LPT/ GPIO 1 x Header
LPC 1 x Header
Volume Control 1 x Header
Chassis Intrusion 1 x Header
Onboard Jumpers
COM Port Ring-In/ Power Select 2 x Headers provide power selection of “12V” or “5V” or “Ring-In” on COM ports
AT/ATX Select 1 x Header
GPIO Power Select 1 x Header
GPIO High/Low Select 1 x Header
LPT/ GPIO Select 1 x Header
Clear CMOS 1 x Header
LVDS Backlight Enable Voltage
Select
1 x Header
Rear I/O Ports
HDMI 1 x HDMI Connector
USB3.0 2x Stack up USB3.0 Connectors
LAN 2 x 10/100/1000 LAN Ports
Audio 1 x Audio port
OFT10W-3455J User’s Manual
9
Power & Connector
1 x Wide Range DC-In (9V~36V, 6A Max. 19V Recommended)
1x Header (uses a 1x4 2.54mm to AC adapter barrel connector cable)
Form Factor
3.5” SBC (5.7” x 4”)
OFT10W-3455J User’s Manual
10
Chapter 1: IO Port, Mounting Hole Placements
1.1 IO Ports
Item Name Function Description
1 DC_PWR DC-In Jack
DC-In Jack for AC Adapter Power Connection.
(9V~36V, 6A max. 19V recommended) (Barrel Diameter: 5.5mm)
2 HDMI
HDMI Port The HDMI Port Connectors.
NOTE:
1. Under UEFI boot mode: The HDMI and LVDS will provide video signal
simultaneously.
2. Under Legacy boot mode: Only either HDMI (default) or LVDS
provides video signal. (if LVDS panel is attached, please disconnect the
HDMI monitor connection to ECM-3455J board in order for the video
signal to be switched to the LVDS panel).
3 R_USB30_2
USB3.0 Ports The USB3.0 Port Connectors
4 R_USB30_1
USB3.0 Ports The USB3.0 Port Connectors.
5 LAN1
Gigabit LAN
(RJ-45) Connectors
This port allows Gigabit connection to a Local Area Network (LAN)
through a network hub. Refer to the table below for the LAN port LED
indications.
ACT/Link LED Speed LED
Status Description Status Description
OFF No link OFF 10Mbps
connection
Table des matières
Autres manuels BCM Advanced Research Comprimé
