BCM Advanced Research HPM-SRSDE Manuel utilisateur

Part No: E2047P4S000R

HPM-SRSDE

Intel® dual 4th Gen. Xeon® Scalable Processor Proprietary

Server Board with Intel® C741 Chipset and IPMI2.0

User’s Manual

1st Ed –07 September 2023

HPM-SRSDE User’s Manual

FCC Statement

THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING

INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS

FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.

THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST

HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A

COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN

RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN

ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL

INTERFERENCE TO RADIO COMMUNICATIONS.

OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE

HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO

CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

Notice

This guide is designed for experienced users to setup the system within the shortest time.

For detailed information, please always refer to the electronic user's manual.

No part of this document may be reproduced, copied, translated, or transmitted in any form

or by any means, electronic or mechanical, for any purpose, without the prior written

permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including circuits

and/or software described or contained in this manual in order to improve design and/or

performance. We assume no responsibility or liability for the use of the described

product(s), conveys no license or title under any patent, copyright, or masks work rights

to these products, and makes no representations or warranties that

2 HPM-SRSDE User’s Manual

HPM-SRSDE User’s Manual

User’s Manual

these products are free from patent, copyright, or mask work right infringement, unless

otherwise specified. Applications that are described in this manual are for illustration

purposes only. We make no representation or warranty that such application will be

suitable for the specified use without further testing or modification.

Life Support Policy

OUR PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN LIFE

SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL.

As used herein:

1. Life support devices or systems are devices or systems which, (a) are intended for

surgical implant into body, or (b) support or sustain life and whose failure to perform,

when properly used in accordance with instructions for use provided in the labeling, can

be reasonably expected to result in significant injury to the user.

2. A critical component is any component of a life support device or system whose

failure to perform can be reasonably expected to cause the failure of the life

support device or system, or to affect its safety or effectiveness.

A Message to the Customer

Customer Services

Each and every our product is built to the most exacting specifications to ensure

reliable performance in the harsh and demanding conditions typical of

industrial environments. Whether your new device is destined for the laboratory or the

factory floor, you can be assured that your product will provide the reliability and ease of

operation.

Your satisfaction is our primary concern. Here is a guide to our customer services. To

ensure you get the full benefit of our services, please follow the instructions below

carefully.

Technical Support

We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For the most frequently asked questions, you can

easily find answers in your product documentation. These answers are normally a lot more

detailed than the ones we can give over the phone. So please consult the user’s manual

first.

4 HPM-SRSDE User’s Manual

HPM-SRSDE User’s Manual

Product Warranty

We warrant to you, the original purchaser, that each of its products will be free from

defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized, or which have been subject to misuse,

abuse, accident or improper installation. We assume no liability under the terms of

this warranty as a consequence of such events. Because of our high quality-control

standards and rigorous testing, most of our customers never need to use our repair

service. If any of our products is defective, it will be repaired or replaced at no charge

during the warranty period. For out-of-warranty repairs, you will be billed according to the

cost of replacement materials, service time, and freight. Please consult your dealer for

more details. If you think you have a defective product, follow these steps:

1. Collect all the information about the problem encountered. (For example,

CPU type and speed, our products model name, hardware & BIOS

revision number, other hardware and software used, etc.) Note anything

abnormal and list any on-screen messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product,

and any helpful information available.

3. If your product is diagnosed as defective, obtain an RMA (return material

authorization) number from your dealer. This allows us to process your good

return more quickly.

4. Carefully pack the defective product, a complete Repair and Replacement

Order Card and a photocopy proof of purchase date (such as your sales

receipt) in a shippable container. A product returned without proof of the

purchase date is not eligible for warranty service.

5. Write the RMA number visibly on the outside of the package and ship it

prepaid to your dealer.

User’s Manual

HPM-SRSDE User’s Manual

Content

1. Getting Started............................................................................................................9

1.1 Safety Precautions....................................................................................................9

1.2 Packing List.............................................................................................................10

1.3 Document Amendment History ...............................................................................11

1.4 Manual Objectives...................................................................................................12

1.5 System Specifications.............................................................................................13

1.6 Architecture Overview—Block Diagram..................................................................20

2. Hardware Configuration...........................................................................................21

2.1 Product Overview....................................................................................................22

2.2 Jumper and Connector List.....................................................................................23

2.3 Setting Jumpers & Connectors ...............................................................................26

2.3.1 Flash Security Override (JPFLASHSEC)....................................................................................... 26

2.3.2 ME FW update (JPME1) ................................................................................................................ 26

2.3.3 Force PWRON setting (JPALLPWRON1)...................................................................................... 27

2.3.4 Clear CMOS (JPBAT1) .................................................................................................................. 27

2.3.5 Boot UART5 setting (JPBOOT_UART5)........................................................................................ 28

2.3.6 SATA or PCIE select (JPSATASEL).............................................................................................. 28

2.3.7 CPLD JTAG header (JCPLD_JTAG1) ........................................................................................... 29

2.3.8 System fan connector 1 (SYS_FAN1)............................................................................................ 29

2.3.9 System fan connector 2 (SYS_FAN2)............................................................................................ 30

2.3.10 System fan connector 3 (SYS_FAN3) ....................................................................................... 30

2.3.11 System fan connector 4 (SYS_FAN4) ....................................................................................... 31

2.3.12 System fan connector 5 (SYS_FAN5) ....................................................................................... 31

2.3.13 System fan connector 6 (SYS_FAN6) ....................................................................................... 32

2.3.14 CPU fan connector 1 (CPU_FAN1) ........................................................................................... 32

2.3.15 CPU fan connector 2 (CPU_FAN2) ........................................................................................... 33

2.3.16 SPI connector (JSPI1) ............................................................................................................... 33

2.3.17 Serial port 2 connector (JCOM2)............................................................................................... 34

2.3.18 BMC_UART5 debug connector (JCOM5).................................................................................. 34

2.3.19 Serial General Purpose I/O connector (JSGPIO1).................................................................... 35

2.3.20 ATX 12V power connector 1 (ATX12V1)................................................................................... 35

2.3.21 ATX 12V power connector 2 (ATX12V2)................................................................................... 36

2.3.22 ATX 12V power connector 3 (ATX12V3)................................................................................... 36

2.3.23 ATX power connector (ATXPWR1) ........................................................................................... 37

2.3.24 Power supply PMBus connector (JPMBUS1)............................................................................ 37

2.3.25 Front Panel USB2.0 connector (JUSB1) ................................................................................... 38

2.3.26 Front Panel USB3.1 connector (JUSB2) ................................................................................... 38

HPM-SRSDE User’s Manual

6 HPM-SRSDE User’s Manual

2.3.27 Front Panel connector 1 (JFP1)................................................................................................. 39

2.3.28 Front Panel connector 2 (JFP2)................................................................................................. 39

2.3.29 Inlet Thermal Sensor (JINLET_SER1)....................................................................................... 40

2.3.30 Outlet Thermal Sensor (JOUTLET_SER1)................................................................................ 40

2.3.31 HDD Backplane thermal Sensor (JHDD_SER1) ....................................................................... 41

2.3.32 CASE OPEN connector (JCASE_OPEN1)................................................................................ 41

2.3.33 VROC Header (JRAID_KEY1)................................................................................................... 42

2.3.34 CPU PCIE HP SMB connector (JPEHPSMB1) ......................................................................... 42

2.3.35 AZALIA connector (JAUDIO1)................................................................................................... 43

2.3.36 SMBUS VR connector (JVR_PRG1) ......................................................................................... 43

2.3.37 ESPI connector (JESPI1)........................................................................................................... 44

2.4 Processor Installation SOP .....................................................................................45

3.BIOS Setup....................................................................................................................52

3.1 Introduction .............................................................................................................53

3.2 Starting Setup .........................................................................................................53

3.3 Using Setup ............................................................................................................54

3.4 Getting Help............................................................................................................55

3.5 In Case of Problems................................................................................................55

3.6 BIOS setup..............................................................................................................56

3.6.1 Main Menu...................................................................................................................................... 56

3.6.1.1 System Language.................................................................................................................. 56

3.6.1.2 System Date .......................................................................................................................... 56

3.6.1.3 System Time.......................................................................................................................... 56

3.6.2 Advanced Menu ............................................................................................................................. 57

3.6.2.1 Trusted Computing................................................................................................................ 57

3.6.2.2 ACPI Settings ........................................................................................................................ 58

3.6.2.3 AST2600 Super IO Configuration.......................................................................................... 59

3.6.2.3.1 Serial Port 1 Configuration .................................................................................................... 59

3.6.2.3.2 Serial Port 2 Configuration .................................................................................................... 60

3.6.2.4 Serial Port Console Redirection ............................................................................................ 60

3.6.2.5 Option ROM Dispatch Policy................................................................................................. 61

3.6.2.6 USB Configuration................................................................................................................. 63

3.6.2.7 Network Stack Configuration................................................................................................. 64

3.6.2.8 NVMe Configuration .............................................................................................................. 64

3.6.3 Platform Config............................................................................................................................. 65

3.6.3.1 PCH-IO Configuration............................................................................................................ 65

3.6.3.1.1 PCI Express Configuration .................................................................................................... 66

3.6.3.1.2 SATA And RST Configuration ............................................................................................... 71

3.6.3.1.3 USB Configuration................................................................................................................. 74

3.6.3.1.4 HD Audio Configuration......................................................................................................... 75

User’s Manual

HPM-SRSDE User’s Manual

3.6.3.2 Server ME Configuration ....................................................................................................... 75

3.6.4 Socket Config ............................................................................................................................... 76

3.6.4.1 Processor Configuration........................................................................................................ 76

3.6.4.1.1 Per-Socket Configuration ...................................................................................................... 77

3.6.4.1.1.1CPU Socket 0 Configuration.................................................................................................. 77

3.6.4.1.1.2CPU Socket 1 Configuration.................................................................................................. 78

3.6.4.2 Memory Configuration ........................................................................................................... 78

3.6.4.2.1 Memory Topology.................................................................................................................. 79

3.6.4.3 IIO Configuration.................................................................................................................... 79

3.6.4.3.1 Socket0 Configuration ........................................................................................................... 80

3.6.4.3.1.1Port DMI................................................................................................................................. 84

3.6.4.3.1.2Port 1A(PCIe Slot6), Port 2A(PCIe Slot4), Port 3A(PCIe Slot2), Port 4A(X550), Port 4C(M.2),

Port 4E(SAS1), Port 4G(SAS1), Port 5A(SAS2), Port 5C(SAS2), Port 5E(SAS3), Port 5G(SAS3)....... 85

3.6.4.3.2 Socket1 Configuration ........................................................................................................... 86

3.6.4.3.2.1Port 1A(PCIe Slot7), Port 2A(PCIe Slot5), Port 3A(PCIe Slot3), Port 5A(PCIe Slot1).......... 89

3.6.4.3.3 Intel VT for Directed I/O (VT-d).............................................................................................. 91

3.6.4.3.4 Intel VMD technology ............................................................................................................ 91

3.6.4.3.4.1Intel VMD for Volume Management Device on Socket 0 ...................................................... 92

3.6.4.3.4.2Intel VMD for Volume Management Device on Socket 1 ...................................................... 92

3.6.4.4 Advanced Power Management Configuration....................................................................... 93

3.6.4.4.1 CPU P State Control................................................................................................................ 93

3.6.4.4.2 CPU C State Control................................................................................................................ 94

3.6.5 Server Mgmt................................................................................................................................. 95

3.6.5.1 System Event Log.................................................................................................................. 97

3.6.5.2 Bmc self test log .................................................................................................................... 98

3.6.5.3 BMC network configuration ................................................................................................... 98

3.6.5.4 BMC User Settings................................................................................................................ 99

3.6.5.4.1 BMC Add User Details............................................................................................................. 99

3.6.5.4.2 BMC Delete User Details....................................................................................................... 100

3.6.5.4.3 BMC Change User Settings................................................................................................... 100

3.6.6 Security....................................................................................................................................... 101

3.6.6.1 Secure Boot......................................................................................................................... 101

3.6.7 Boot ............................................................................................................................................ 102

3.6.8 Save and exit.............................................................................................................................. 104

3.6.8.1 Save Changes and Exit....................................................................................................... 104

3.6.8.2 Discard Changes and Exit................................................................................................... 104

3.6.8.3 Save Changes and Reset.................................................................................................... 105

3.6.8.4 Discard Changes and Reset................................................................................................ 105

3.6.8.5 Save Changes..................................................................................................................... 105

3.6.8.6 Discard Changes................................................................................................................. 105

HPM-SRSDE User’s Manual

8 HPM-SRSDE User’s Manual

3.6.8.7 Restore Defaults.................................................................................................................. 105

3.6.8.8 Save as User Defaults......................................................................................................... 105

3.6.8.9 Restore User Defaults ......................................................................................................... 105

4. Drivers Installation.....................................................................................................106

4.1 Install Chipset Driver.............................................................................................107

4.2 Install VGA Driver..................................................................................................108

4.3 Install Audio Driver................................................................................................110

4.4 Install Ethernet Driver............................................................................................111

4.5 Install QuickAssist Technology Driver...................................................................112

4.6 Install VROC Driver...............................................................................................113

5. Mechanical Drawing ..................................................................................................115

User’s Manual

HPM-SRSDE User’s Manual

1.Getting Started

1.1 Safety Precautions

Warning!

Always completely disconnect the power cord from your

chassis whenever you work with the hardware. Do not make

connections while the power is on. Sensitive electronic

components can be damaged by sudden power surges.

Only experienced electronics personnel should open the PC

chassis.

Caution!

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution,

use a grounding wrist strap at all times. Place all electronic

components in a static-dissipative surface or static-shielded

bag when they are not in the chassis.

Risk of Explosion if Battery is replaced by an Incorrect Type.

Dispose of Used Batteries According to the Instructions.

Français:

Attention!

Débranchez le câble d'alimentation de votre châssis chaque

fois que vous travaillez avec le matériel. Ne faites pas de

connexion lorsque le système est allumé. Les composants

électroniques sensibles peuvent être endommagés par les

surtensions soudaines. Seule les personnels expérimentés

de l'électronique peuvent ouvrir le châssis du PC.

Précaution!

Il faut toujours mettre à la masse pour éliminer l’électricité

statique avant de toucher la carte CPU. Les appareils

électroniques modernes sont très sensibles aux électricité

statique. Pour des raisons de sécurité, utilisez un bracelet

électrostatique. Placez tous les composants électroniques

sur une surface antistatique ou dans un sac antistatique

quand ils ne sont pas dans le châssis.

Risque d'explosion si la batterie est remplacée par un type

incorrect. Jetez les piles usagées selon les instructions

HPM-SRSDE User’s Manual

10 HPM-SRSDE User’s Manual

Warning!

Class I Equipment. This equipment must be earthed. The

power plug must be connected to a properly wired earth

ground socket outlet. An improperly wired socket outlet

could place hazardous voltages on accessible metal parts.

Warning!

IT Room

Suitable for installation in Information Technology Rooms in

accordance with Article 645 of the National Electrical Code

and NFPA 75.

Warning!

RAL

The device can only be used in a fixed location such as a lab

or a machine room. When you install the device, ensure that

the protective earthing connection of the socket-outlet is

verified by a skilled person.

Warning!

For RTC battery, current statement in the manual is

acceptable.

There is danger of explosion if the battery is mishandled or

incorrectly replaced. Replace only with the same type of

battery. Do not disassemble it or attempt to recharge it

outside the system. Do not crush, puncture, dispose of in

fire, short the external contacts, or expose to water or other

liquids. Dispose of the battery in accordance with local

regulations and instructions from your service provider.

1.2 Packing List

⚫1 x HPM-SRSDE motherboard

⚫1 x I/O Shield

⚫2 x LGA4677 CPU carrier-E1B

Ce manuel convient aux modèles suivants

Table des matières

Manuels Carte serveur populaires d'autres marques

Abit

Abit SI-2PS Manuel utilisateur

Intel

Intel S2600KP Manuel utilisateur

Supermicro

Supermicro SUPERSERVER 6026TT-TF Manuel utilisateur

Intel

Intel S2600CO series Manuel utilisateur

Advantech

Advantech ASMB-935 Series Manuel d'installation et d'exploitation

Advantech

Advantech ASMB-784 Manuel utilisateur

Intel

Intel SE7520BD2 Manuel utilisateur

MSI

MSI 5000P Master2 Series Manuel utilisateur

MSI

MSI MS-S0131 Manuel utilisateur

Intel

Intel S845WD1-E - Server Board Motherboard Manuel utilisateur

TYAN

TYAN Transport GT24 (B2912) Service Manuel utilisateur

MSI

MSI E7320 Master-2S Manuel utilisateur

MSI

MSI 5000P Master-A4M Manuel utilisateur

Intel

Intel SC5650BCDP Guide de configuration

Gigabyte

Gigabyte R182-34A Manuel utilisateur

Asus

Asus ASMB3-SOL Manuel utilisateur

Supero

Supero H8QI6-F Manuel utilisateur

Intel

Intel SPKA4 - Server Platform - 0 MB RAM Manuel utilisateur