BC Acoustique EX PHONO-3X Manuel utilisateur

The oponal EX PHONO-3X module is a dedicated

pre-amplier that will allow you to connect your turntable

to your BC components. The EX PHONO is compable with

MM (Moving Magnet) and MC (Moving Coil) cartridges.

The EX PHONO-3X module is dedicated to be used with

BC Acousque EX products equipped with an « OPTIONAL

BOARD » slot. The board is compable with EX312 - EX322 -

EX332 - EX362 - EX888 - EX322.1 - EX888.1 products.

INSIDE THE PACKAGING

① 1x EX PHONO-3X card with its 4 Phillips screws

② 1x Large metal plate

-> Fit for ampliers EX322, EX888 specs

③ 1x Small metal plate

-> Fit for ampliers EX332D specs

④ 1x Stereo RCA cable

⑤ 1x 6 pin MOLEX cable - Short / POWER

-> For EX332D type ampliers

⑥ 1x 6 pin MOLEX cable - Long / POWER

-> For EX322 type ampliers

⑦ 1x 3 pin cable / LINE OUT

⑦ 1x This manual

Tools needed: Philips 2 screwdriver

Phono card MM & MC

WARNING !

Before starng the installaon of the EX PHONO-3X card,

make sure that your amplier EX Series is powered o AND

disconnected from the wall power cord.

Warning, never operate inside the product if the power

cord is connected. When opened, some internal parts of

the product might cause sever injuries as they are working

at high voltage.

All other internal operaons apart the one described in this

manual about oponal module installaon, must be done

by a qualied technician.

We invite you to contact our accredited service staons if

your product has been chocked, exposed to moisture or

humidity or if any parts has been introduce inside the

product. Internal fuses replacement is also an operaon

which should be done by accredited technician.

IMPORTANT !

PLEASE FOLLOW THESE STEPS IN THE ORDER INDICATED

Important safety instrucons

Introducon

QUICK INSTALLATION GUIDE

QUICK INSTALLATION - 8 Steps:

1- Turn o the amplier (POWER).

2- Remove the power cord from the amplier.

3- To operate inside the amplier, unscrew the cabinet or

the dedicated plate witch is

located on the boom of the

product (depending on the

model of your amplier).

Also remove the metal plate

on the read side.

4- Set the source selector (located on the input board) to

acvate the EX PHONO-3X device instead of the

«OPTIONAL » RCA input.

5- Screw the EX PHONO-3X card to the amplier.

Phono Card With large plate With small plate

( (without front plate) for EX322/888 types for EX332D type

Use the "large" plate for EX322 & EX888 ampliers family

and the "small" plate for EX332D ampliers family.

6- Connect the power and the signal cords from EX PHONO-

3X card to the pre-amplier board and the power module.

For EX322:

Make sure the 2

cables will not

be damaged or

crushed by the

cabinet.

For EX332D:

By the trap door

located below the

amplier, connect

the two cables on

the card dedicated

for this purpose.

For EX888:

Connect the two

cables from your

EX PHONO-3X card:

«LINE OUT » &

«POWER ».

For EX888.1:

Connect the two

cables from your EX

PHONO-3X card:

«LINE OUT » &

«POWER ».

7- Close the amplier.

8- Connect external cables: HP sources (including your

turntable) and at the end, connect the power cord cable.

For repair, during or aer the warranty, please contact your

dealer.

To obtain warranty service and technical support, thank you

kindly to register your product online on the website

www.bc-acousque.com at the product registraon

secon.

BC ACOUSTIQUE

BP 306

94709 Maisons-Alfort Cedex France

www.bc-acousque.com

Quick installaon guide Installaon

Troubleshoong

EX322D EX322

EX888

EX332D

EX888.1

Autres manuels BC Acoustique Amplificateur

BC Acoustique

BC Acoustique EX502 Guide de configuration

BC Acoustique

BC Acoustique EX888 Manuel utilisateur

BC Acoustique

BC Acoustique EX-214 Manuel utilisateur

BC Acoustique

BC Acoustique EX888 Manuel utilisateur

BC Acoustique

BC Acoustique EX202 Manuel utilisateur

BC Acoustique

BC Acoustique EX202 Manuel utilisateur

BC Acoustique

BC Acoustique EX322D Manuel utilisateur

BC Acoustique

BC Acoustique EX212 Manuel utilisateur

BC Acoustique

BC Acoustique EX242 Manuel utilisateur

BC Acoustique

BC Acoustique EX522 Manuel utilisateur

BC Acoustique

BC Acoustique EX332.2 Manuel utilisateur

BC Acoustique

BC Acoustique X-222 Manuel utilisateur

BC Acoustique

BC Acoustique EX222 Manuel utilisateur

BC Acoustique

BC Acoustique EX322 Manuel utilisateur

BC Acoustique

BC Acoustique EX362D Manuel utilisateur

BC Acoustique

BC Acoustique EX332D Manuel utilisateur

BC Acoustique

BC Acoustique EX222.3 Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur