Bayou Classic SP16 Manuel utilisateur

HIGH PRESSURE COOKER

with 6-ft EXTENSION HOSE

OWNER’S MANUAL

SAFETY ALERTS, ASSEMBLY & OPERATING INSTRUCTIONS

GENERAL MAINTENANCE & STORAGE

KEEP THIS MANUAL FOR FUTURE REFERENCE

NOT FOR COMMERCIAL USE

Barbour International, Inc. • 101 Cypress Way, Brandon, MS 39042

1-800-736-8028 (English Only) • Monday - Friday 7:30am - 4:30pm CST

www.bayouclassic.com

This Instruction Manual contains important information necessary for the proper assembly and

safe use of the appliance. You must carefully read and follow all warnings and instructions before

assembling and using the appliance. Follow all warnings and instructions when using the appliance.

This manual is for Barbour International Bayou Classic®products only. If you are using another

manufacturer’s product, refer to the manual supplied with that product. Only use approved

Bayou Classic®replacement parts and accessories with this appliance.

MODEL #

SP16

SAFETY

IF YOU SMELL GAS:

• Shut off gas to the appliance.

• Extinguish any open ﬂame.

• Open Lid.

• If odor continues, keep away from the

appliance and immediately call your ﬁre

department.

DANGER

Failure to follow these instructions could

result in ﬁre or explosion which could

cause property damage, personal injury

or death.

DANGER

Not following these instructions will most

certainly result in ﬁre or explosion which

will cause property damage, personal

injury, or death.

Hazard or unsafe practices possibly

resulting in minor property damages,

personal injury, or death.

CAUTION

Hazard or unsafe practices could result in

severe property damages, personal injury,

or death.

WARNING

• Never operate this appliance unattended.

• Never operate this appliance within 3 m/10 ft of any structure, combustible material or

other gas cylinder.

• Never operate this appliance within 7.5 m/25 ft of any ﬂammable liquid.

• Do not ﬁll cooking vessel beyond maximum ﬁll line.

• Never allow oil or grease to get hotter than 200°C/400°F. If temperature exceeds

200°C/400°F or if oil begins to smoke, immediately turn the burner or gas supply OFF.

• If the temperature exceeds 200°C/400°F or if oil begins to smoke, immediately turn the

burner or gas supply OFF and wait for the temperature to decrease to less than

175°C/350°F before relighting burner. If there is a lid (cover), do not remove the lid.

• The appliance and heated liquids will remain HOT long after the cooking process is

complete. Never touch any part of the appliance until it has cooled to 45°C/115°F or less.

• If a ﬁre should occur, keep away from the appliance and immediately call your ﬁre

department. Do not attempt to extinguish an oil or a grease ﬁre with water.

• This appliance is not intended for and should never be used as a heater.

• Do not place an empty cooking vessel on the appliance while in operation.

• Never use glassware, plastic, or ceramic cookware with this appliance.

• Keep the fuel supply hose away from any heated surface(s).

• Never use a cooking vessel larger than 40.6 cm/16-in diameter, or more than

58.7 L/62 Qt in volume.

• If a thermometer is used with this appliance, it must reach 75% of the cooking vessel

depth.

DANGER

Failure to follow these instructions could result in ﬁre or explosion

which could cause property damage, personal injury, or death!

WARNING

• Sober adult operation ONLY! The use of alcohol, prescription or non-prescription drugs

may impair ability to properly assemble or safely operate appliance.

• Do not use appliance for anything other than its intended purpose.

• This appliance is not for frying turkeys.

• This appliance is for OUTDOOR USE ONLY, and shall not be used in a building, garage or

any other enclosed area.

• Do not use appliance on or under any apartment or condominium balcony or deck. For

more details, see instructions for placement of cooker in this manual.

• This appliance is not intended for use in or on a boat or recreational vehicle.

• Do not attempt to light this appliance without ﬁrst following the instructions in this manual

for proper assembly, placement, and testing.

• Do not stand with head, body or arms over the appliance when lighting. Loose hair and

clothing can catch ﬁre.

• In sunlight or other bright light, the ﬂame may not be visible. Always use caution around

an open ﬂame.

• The hose and regulator assembly supplied with this appliance must be used.

• Always use a properly functioning thermometer to know the temperature of the cooking

liquid.

• Do not move the appliance while in use.

• Avoid bumping of or impact with the appliance to prevent spillage or splashing of hot

cooking liquid.

• Keep children and pets away from the cooking area at all times.

• Introduction of water or ice from any source into the oil/grease may cause overﬂow

and severe burns from hot oil and water splatter. When frying with oil/grease, all food

products MUST be completely thawed and towel dried before being immersed in the fryer.

• Use caution when placing food in a cooking vessel while the appliance is in operation.

Never drop food or accessories into hot cooking liquid. Lower food and accessories

S-L-O-W-L-Y into the cooking liquid in order to prevent splashing or overﬂow.

• Always take care when removing food to avoid burns from steam or hot cooking liquids.

• Always have a Type BC or ABC ﬁre extinguisher readily accessible during operation.

• In the event of an oil or grease ﬁre do not attempt to extinguish with water. Immediately

call the ﬁre department. A type BC or ABC ﬁre extinguisher may, in some circumstances

contain a ﬁre.

• In the event of rain, snow, hail, or sleet while cooking with oil or grease, cover the cooking

vessel immediately and turn off the appliance burner(s) and gas supply. Do not attempt to

move the appliance or cooking vessel.

• The appliance will be HOT after being operated. DO NOT TOUCH the frame or cooking

vessel when re-lighting or moving the burner before it has cooled down.

If you have any doubts or concerns about your ability to use this product contact Barbour International,

Inc. Should you still have concerns about operating this product, then do not use. Contact your dealer

for return or refund. Strict compliance to these instructions, plus common sense operation, are primary

accident prevention measures. Restrict the use of this appliance to adults who can read, understand and

follow the warnings and instructions found in this manual.

REMEMBER: THINK SAFETY AND USE COMMON SENSE!

This gas appliance has greater heat output than traditional kitchen stoves. It can be referred to as a cooker or

appliance in this manual. The appliance is designed to work with a cooking vessel (pot). The appliance is only

designed to work with the hose and regulator supplied with this product. This appliance is intended for cooking food

(fry, steam, boil, or brew). All other applications could void the warranty or create an unsafe situation.

ABOUT THIS PRODUCT

GENERAL OPERATING

• Always inspect the appliance and its components before every use as described in this manual:

A. Ensure appliance is properly assembled and connected to the LP cylinder

B. Inspect hose and tank for evidence of abrasion, wear, cuts or leaks

C. Conﬁrm that nothing is obstructing the burner

D. Perform Gas Leak Test before lighting

NOTE: If any part or component of this appliance appears damaged or inaccurate, DO NOT USE.

Call Barbour International, Inc. for a replacement part.

• Set up the cooking area in a safe location as outlined in this manual

• Follow Lighting/Re-Lighting Instructions in this manual

• Use these instructions to determine the maximum ﬁll level when using a vessel without a maximum ﬁll line:

A. Place the food product on the holder.

B. Place the food product and holder into the empty vessel.

C. Fill vessel with water just until the food product is completely submerged.

NOTE: There must be a minimum of 8 cm/3-in between the water level and top of the vessel.

D. Remove the food product from the vessel and either mark the water level on the side of the

vessel or measure the amount of water in the vessel.

E. Remove the water and completely dry the vessel and the food product.

F. This is the amount of liquid the vessel is to be ﬁlled with to cook the food product.

• This appliance will be hot during and after use; always wear protective clothing when operating. Use insulated

mitts or gloves for protection from hot surfaces or splatter from cooking liquids. Wear close-toed shoes.

• Carefully monitor all activity around cooker to avoid burns or other injuries.

• Control the cooker ﬂame by making adjustments to the valve and air shutter.

• If cooking requires the use of a thermometer, follow instructions included with the thermometer for proper use.

• Use caution when near cooker as splattered liquid may have created a slick surface.

• When adding or removing food from the vessel, care should be taken to avoid burns from hot cooking liquids.

• After cooking, continue to monitor the area. Never touch, move, or store the appliance or cooking liquids before

they have cooled to 45°C/115°F or less. NOTE: Cool down periods will vary with environment.

• When cooking is completed, turn off gas and follow the Care & Maintenance Instructions.

NEVER LEAVE

UNATTENDED

OUTDOOR USE

ONLY

NEVER USE UNDER

FLAMMABLE

OVERHANG

NEVER USE ON

FLAMMABLE

SURFACES

KEEP FIRE

EXTINGUISHER

NEARBY

NEVER LEAN OVER

BURNER

HOT DURING AND

AFTER USE! TRIP HAZARD

WATCH YOUR STEP

KEEP CHILDREN

AND PETS AWAY

ALWAYS PERFORM

GAS LEAK TEST

ASSEMBLY INSTRUCTIONS

Carefully assemble this appliance according to these instructions. Inspect contents in the box to ensure all parts are

included and undamaged. Please contact Barbour International, Inc. if any parts appear damaged, missing, or

inaccurate. Proof of purchase will be required.

To Assemble:

1. Remove components from the box and packaging.

2. Attach Burner to Support Bar: Remove locking nut from bottom of burner.

Insert mounting bolt into center hole of support bar. Holding burner in

place, attach locking nut and wrench tighten.

4. Attach Hose Assembly to Burner: It is important to properly connect the oriﬁce to the burner. The brass ﬁtting

with oriﬁce will screw directly into the burner. To attach, hold the air shutter up against the end of the burner.

Place the small end of the spring onto the brass ﬁtting, and insert into threaded hole of the burner. Screw the

brass ﬁtting into the burner until the spring is mostly compressed and connection is ﬁrm. The air shutter should be

allowed to turn freely, but still hold its position. ATTENTION: Do not cross-thread.

5. Read all instructions in this manual regarding the LP Cylinder and Hose Valve Regulator before connecting the

cooker to the fuel supply.

3. Assemble Regulator/Hose/Fitting:

Screw Brass ﬁtting into 3/8” Flare end of the 6-foot Extension Hose.

Connect male end of 6-foot Extension Hose to Needle Valve of Regulator Assembly.

ATTENTION: Do not cross-thread or over-tighten connections.

Parts List:

• Cooker Frame

• Cast Aluminum Burner

• Regulator with Needle Valve Assembly

• 6-foot Extension Hose

• Brass ﬁtting with #57 Oriﬁce

Adjustable

Wrench

Tools Required:

(Not Included)

(Hose length not to scale)

Brass Fitting with

#57 Oriﬁce

• Read and follow all warnings and instructions on the LP cylinder.

• Speciﬁcations (These features and speciﬁcations MUST be present):

LIQUID PROPANE (LP) CYLINDER

This appliance is designed to only operate using Liquid Propane (LP) gas in a self-contained gas supply system (tank).

Please follow these instructions for proper speciﬁcations and operation.

A. Never store a spare LP gas cylinder under or near this appliance.

B. Never ﬁll the cylinder beyond 80 percent full

If the information in (A) and (B) are not followed exactly, a ﬁre causing death or serious injury

may occur.

DANGER

CARBON MONOXIDE HAZARD

This appliance can produce Carbon Monoxide, an odorless and poisonous gas. Never operate

this appliance in a building or conﬁned area where ventilation may be restricted. Using it in

an enclosed space can kill you.

DANGER

9.1 Kg/20 lbs capacity; 31.75cm/12.5-in diameter by 45.72cm/18-in tall

• The LP cylinder must be constructed and marked in accordance

with the speciﬁcations for LP gas cylinders, U.S. Department of

Transportation (DOT) or the Standard for Cylinders, Spheres

and Tubes for the Transportation of Dangerous Goods, CAN/

CSA-B339.

• If you exchange the LP cylinder, make sure the new tank complies

with all the speciﬁcations listed here.

45.72cm/

18-in Tall

31.75cm/ 12.5-in Diameter

LP Cylinder Valve

(Trilobular Hand-wheel

indicates OPD is present)

Type-1

Outlet

Protective

Collar

Safety

Relief

Valve

Protective

Cap

Type-1 gas cylinder valve outlet to accommodate the hose

and regulator supplied with this appliance. The Type-1 valve

must prevent gas ﬂow until a positive seal is obtained.

Over-Filling Protection Device (OPD) - indicated by a

trilobular hand-wheel.

Collar to protect the cylinder valve. Required of any cylinder

whose capacity is in excess of 1 Kg/2.2 lbs.

Safety Relief Valve

Protective cap

Cylinder must be arranged for vapor withdrawal (not shown).

Place dust cap on cylinder valve outlet whenever

the cylinder is not in use. Only install the type of dust

cap on the cylinder valve outlet that is provided with

the cylinder valve. Other types of caps or plugs may

result in leakage of propane.

CAUTION

WARNING

• Do not attempt to move, alter, or disconnect the LP cylinder while the appliance is in use.

• Always secure the LP cylinder in an upright position.

• Always disconnect to move the appliance and/or LP cylinder.

• If the appliance is not in use, the gas must be turned off at the supply LP cylinder.

• LP cylinders must be stored outdoors out of the reach of children, and shall not be stored in

a building, garage or any other enclosed area.

• Allow only qualiﬁed LP gas dealers to properly ﬁll or repair your LP cylinder.

• Always use the protective cap when not connected to the hose and regulator. Only use the

cap supplied with the LP cylinder; any other type may result in leakage of propane.

• An over-ﬁlled or improperly stored cylinder could cause the safety relief valve to fail.

• If you see, smell, or hear gas escaping, immediately get away from the cooker and LP

cylinder, and call your local ﬁre department.

• Failure to follow these instructions could result in ﬁre or explosion which could cause

property damage, personal injury, or death!

• The hose and regulator assembly supplied with this appliance must be used.

• Do not attempt to disassemble, alter, or repair any part of the hose and regulator

assembly. Approved replacement parts can be obtained from Barbour International, Inc.

REGULATOR WITH VALVE

The Regulator supplied with this appliance is an

independently CSA certiﬁed product. It is designed to

connect the appliance to a 9.1 Kg/20 lbs LP Cylinder.

Read and follow all instructions and warnings on the

safety tags. If there is evidence of damage, wear or leaks,

the regulator must be replaced prior to the appliance

being put into operation. No matter the physical

appearance, replace the regulator with valve and every

two years. Replace only with Model #7000.

To CONNECT Hose Valve Regulator

to the LP Cylinder:

To DISCONNECT Hose Valve Regulator

to the LP Cylinder:

Replace

Dust Cap

Upright

Position

Hand

tighten only

Always conﬁrm both LP Cylinder Valve and Brass Valve are turned to the

off (closed) positions before connecting or disconnecting the HVR.

CAUTION

10 PSI Fixed

Regulator

Brass Valve

Type-1

Connector

Performing a Gas Leak Test:

1. Create a mixture of 50% water and 50% liquid dish-washing soap.

2. Turn the LP Cylinder Valve to the off (closed) position. Then turn

the Brass Valve to the off (closed) position.

3. To turn on the fuel supply, turn the LP Cylinder Valve one turn in

the open direction. Gas will ﬂow through the Regulator and stop

at the Brass Valve still turned to the off (closed) position.

4. Using a clean brush, apply the soap water mixture to the following:

GAS LEAK TEST

When to test for gas leaks:

• After assembling your cooker and before lighting for the ﬁrst time, even if purchased fully assembled.

• Every time the LP gas cylinder is reﬁlled, or if any of the gas components are replaced.

• Any time your cooker has been moved.

• At least once per year or if your cooker has not been used for more than 60 days.

NOTE: The gas leak test must be performed in an area that has adequate lighting in order to see if bubbles are

developing. DO NOT use a ﬂashlight to check for bubbles.

5. First, inspect areas A - F for growing bubbles.

6. Next, turn on (open) the Brass Valve and permit gas to pass

through the hose. Inspect areas G and H.

NOTE: Do not allow gas to ﬂow more than 5 - 10 seconds. During

this step, gas will be ﬂowing out the burner into the surrounding air.

7. Turn the LP Cylinder Valve to the off (closed) position. Then turn the

Brass Valve to the off (closed) position.

8. Tighten any leaking connections.

9. Repeat soap water mixture test until no leaks are detected.

10. After you are certain there are no leaks, turn the LP Cylinder

Valve to the OFF position. Wait 5 minutes for any gas fumes

to evacuate before lighting the burner.

WARNING

• If growing soap bubbles persist throughout any portion

of the Gas Leak Test, terminate use immediately.

• DO NOT use cooker if gas leaks cannot be stopped.

LP Cylinder to LP Cylinder Valve

LP Cylinder Valve to Regulator Connection

All Regulator Housing and Connections

Regulator to Brass Valve Connection

Brass Valve connection to Extension Hose

LP Cylinder Welds

Full length of 6-foot Extension Hose

Hose Swivel Connection and

Brass Fitting to Burner

Wind Direction

Make sure overhead is clear of combustible materials!

50.8cm/20-in

Minimum

• Choose a safe outdoor space, clear of combustible material to operate your appliance.

• Place the appliance on a level, stable noncombustible surface such as brick, concrete, or dirt.

• Prior to lighting, check wind direction. Place cooker DOWNWIND from the LP cylinder.

• Place LP cylinder at least 50.8cm/20-in away from the appliance.

• This appliance is portable and should not be installed into cabinetry or any other enclosed

casing. Any placement or installation of the appliance must conform with local codes or,

in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA 54,

Storage and Handling of Liqueﬁed Petroleum Gases, ANSI/NFPA 58; or Natural Gas and

Propane Installation Code, CSA B149.1; Propane Storage and Handling, CSA B149.2.

• Keep the cooking area clear and free of any combustible material such as spare LP tanks

(full or empty), household chemicals, paint, gasoline and other ﬂammable vapors and

liquids.

• Never enclose the appliance to block the wind. Either relocate your cooker to a less windy

location, or choose not to operate your appliance until the wind has stopped.

DANGER

PLACEMENT OF COOKER

• Do not walk between the cooker and the propane tank; the connecting hose creates a

tripping hazard. Tripping over the hose may cause the supply cylinder to tip.

• Do not locate appliance under overhead unprotected combustible construction or tree

limbs.

• Do not attempt to move the appliance or cooking vessel when cooking.

• Do not position cooker on wood, asphalt, or plastic/rubber mat which may burn blister or

melt.

WARNING

3 m/10 ft.

Clearance

Flame

Spreader

Paper Book

Match

(hand away

from burner)

CORRECT INCORRECT

Blue

Orange

LIGHTING INSTRUCTIONS

Follow these instructions for safe and proper lighting and re-lighting of the appliance.

• The Regulator supplied with this appliance is equipped with a Gas Flow Limiting Device

that will greatly restrict the ﬂow of gas if activated by a rapid release of gas. Reference

Trouble-Shooting Tips if ﬂame ever appears weak.

• If the appliance does not light after 2 or 3 attempts, turn OFF gas supply. Refer to Trouble

Shooting Tips and DO NOT attempt to operate the appliance until the problem is resolved.

CAUTION

Lighting the appliance:

1. Before lighting, completely turn off (close) the LP Cylinder Valve and the

Brass Valve to prevent any gas ﬂow. NOTE: If the Brass Valve is left in any

other position, the Gas Flow Limiting Device will activate.

2. Turn on (open) the fuel supply by S-L-O-W-L-Y rotating the LP Cylinder

Valve one full turn.

• Do not light burner at Air Shutter.

• Even if the ﬂame is extinguished, the tank and regulator will still allow some gas to release

until they are fully CLOSED. You must allow gas to evacuate/dissipate before re-lighting.

WARNING

Brass

Valve

LP Cylinder

Valve

3. Position a ﬁreplace match or long lighter directly over the burner, then turn

on (open) the Brass Valve. The burner should light in less than 5 seconds.

4. After lighting the burner, visually check the burner and adjust to the optimal burner

ﬂame. A blue ﬂame with little or no yellow ﬂame indicates a proper air/gas mixture

and provides the best heat. To adjust:

A. Fully open the LP Cylinder Valve

B. Turn Brass Valve to desired ﬂame height/intensity

C. Rotate Air Shutter until mostly blue ﬂame is achieved and

the ﬂames burn at all ports without lifting above the burner.

5. If ignition does not occur in 5 seconds, completely turn off (close) the LP Cylinder Valve and the Brass Valve wait

5 minutes, and repeat the lighting procedure.

6. If the appliance is accidentally extinguished, completely turn off (close) the LP Cylinder Valve and the Brass

Valve, wait 5 minutes to allow gas to evacuate/dissipate, and repeat Steps 1 thru 4.

Air Shutter

Long Fireplace

Match

3a. It is possible to light this appliance with a

standard paper book match. To light:

A. BEFORE turning on (open) the Brass Valve,

strike the paper book match and place it in

the cup of the burner with the ﬂame of the

match over the serrated edge of the ﬂame

spreader.

B. Remove hand a safe distance from the

burner.

C. Turn on (open) the Brass Valve. The burner

should light in less than 5 seconds.

Table des matières

Autres manuels Bayou Classic Cuisinière

Bayou Classic

Bayou Classic KDS-151 Manuel utilisateur

Bayou Classic

Bayou Classic 2212 Manuel utilisateur

Bayou Classic

Bayou Classic KDS-144 Manuel utilisateur

Bayou Classic

Bayou Classic KDS-1 Manuel utilisateur

Bayou Classic

Bayou Classic 300-100 Manuel utilisateur

Bayou Classic

Bayou Classic SS10 Manuel utilisateur

Bayou Classic

Bayou Classic SP10 Manuel utilisateur

Bayou Classic

Bayou Classic KAB4 Manuel utilisateur

Bayou Classic

Bayou Classic SP31 Manuel utilisateur

Manuels Cuisinière populaires d'autres marques

Modena

Modena FC 7645 SGM Manuel du propriétaire

Electrolux

Electrolux Insight EKG6049 Manuel utilisateur

Stanley

Stanley Donard 60 Manuel utilisateur

Bartscher

Bartscher 201TC Manuel utilisateur

Parkinson Cowan

Parkinson Cowan 50 GR/BU Manuel utilisateur

Siemens

Siemens HK9P00020U Manuel utilisateur

Creda

Creda S150E Mode d’emploi

Creda

Creda HB48309 Manuel utilisateur

Bosch

Bosch HCE743220F Manuel utilisateur

Tricity Bendix

Tricity Bendix SE545P Manuel utilisateur

NEFF

NEFF E1461A2/01 Manuel utilisateur

Zanussi

Zanussi ZCM 700 X Manuel utilisateur

Smeg

Smeg SNL61MA9 Manuel utilisateur

RiverGrille

RiverGrille TF2002501-RG Manuel utilisateur

Vollrath

Vollrath 69504F Manuel utilisateur

Tricity Bendix

Tricity Bendix CSIE500 Manuel utilisateur

AEG

AEG Competence 5731 V Manuel utilisateur

Euromaid

Euromaid ES60 Manuel utilisateur