Bat-caddy X3 Series Manuel utilisateur
ATTENTION: Please follow all assembly instructions. READ the
instructions carefully to understand the operating procedures
BEFORE you run your caddy.
MANUAL
X3SERIES
X8SERIES
X4SERIES
TABLE OF CONTENTS
Packing List...............................................................................................3
Parts Glossary
X3 Series.......................................……...............…………........................................………..4
X4 Series…………….………...............……................……………….....................................…..5
X8 Series...........................................................................................................................6
Assembly Instructions
Unpacking..……………........................................................…......................................….7
Wheels................................................................................................................................7
Frame Setup.............................................................................................................7, 8
Battery Setup................................................................................................................8
Anti-tip wheel..............................................................................................................9
Operating the Caddy
Manual Controls, X3 & X4..........................................................................................9
Manual Control X8.......................................................................................................10
Remote
Remote Control..............…….....................................................……..........…......…..….…11
Synchronizing Your Remote..........................................................................12
Additional Functions
USB port.............................................................................................................................12
Freewheeling Mode....................................................................................................12
Tracking Adjustments..............................................................................................13
Braking System..............................................................................................................13
Maintenance
Testing YourCaddy………………...................................................................………….….14
General Maintenance…………………...........................................…….............…...……14
Troubleshooting Guide............................................................................................15
ModelFeatures...............................................................................................................16
Weight and Measurements……….……........................................................…...…16
PACKING LIST
X3 SPORT, X4 SPORT
Caddy Frame with Front Wheel
2 Rear Wheels (Left & Right)
1 Battery Pack (Battery, Bag, Leads)
1 Charger
1 Tool Kit
Operational Instructions
User Manual, Warranty, Terms & Conditions
X3R, X4R, X8R
1 Caddy Frame with Front Wheel
1 Anti-Tip Wheel & Pin
2 Rear Wheels
1 Battery Pack, SLA or LI (Battery, Bag, Leads)
1 Charger
1 Tool Kit
1 Remote Control (AAA Batteries included)
Operational Instructions
User Manual, Warranty, Terms & Conditions
NOTE:
This device complies with part 15 of the FCC Rules and with Industry
Canada license-exempt RSS standard(s). Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY
RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT
BatCaddy
FCC ID: QSQ-REMOTE
IC ID: 10716A-Remote
3
4
1.T-Handle w/Power Button
and USB Port
2. Speed Control Dial (Rheostat)
3. Upper Bag Support
4. Lower Bag Support
5. Frame Locking Hinge
6. Battery w/Bag & Lead
7. Charger
8. Battery Connection Plug
9. Lower Frame Connector
10. Rear Wheels
11. Front Wheel Assembly
w/ Tracking Adjustment
& Quick Release Axle)
12. Motor Housing
13. Remote (X3R only)
14. Anti-tip Wheel & Pin
(X3R)
PARTS GLOSSARY X3
SERIES
1
23
4
6
8
9
10
11
5
14 12
13
7
5
X4
SERIES
X3
SERIES
1. T-Handle w/Power Button
2. USB Port
3. Speed Control Dial (Rheostat)
4. Upper Bag Support
5. Upper Frame Locking Knob
6. Lower Frame Locking Knob
7. Battery w/Bag & Lead
8. Charger
9. Battery Connection Plug
10. Lower Bag Support & Strap
11. Rear Wheels
12. Front Wheel
(w/ Tracking Adjustment &
Quick Release Axle)
13. Motor Housing
14. Remote (X4R only)
15. Anti-tip Wheel & Pin
(X4R only)
PARTS GLOSSARY
2
1
7
10
4
3
12
6
11
9
8
11
14
15
13
5
6
X8
SERIES
1. T-Handle w/Power Button
2. USB Port
3. Speed Control Dial (Rheostat)
4. Upper Bag Support
5. Upper Frame Locking Knob
6. Battery w/Bag & Lead
7. Charger
8. Battery Connection Plug
9. Lower Bag Support & Strap
10. Rear Wheels
11. Front Wheel
(w/ Tracking Adjustment &
Quick Release Axle)
12. Motor Housing
13. Remote (X8R only)
14. Anti-tip Wheel & Pin
PARTS GLOSSARY
2
3
1
6
9
4
3
11
12
10
8
7
10
13
14
5
7
Note; the X3 Sport and X4 Sport caddys have a right (R) and a left (L) wheel,
seen from behind in driving direction. Please make sure that the wheels
are assembled on the correct side, as the wheels have built-in one-way
clutches. The caddy will not move if the wheels are not on the proper side.
ASSEMBLY INSTRUCTIONS
X4 Locking button
1. Unpack all items carefully and check inventory. Place frame structure (one
piece) on soft clean ground to protect the frame from being scratched.
2. Attach rear wheels to axles by pushing the wheel locking button on the
wheel and inserting the axle extension into the wheel. Make sure to keep
the spring clip on the wheel depressed during this process, in order to
enable the wheel to be inserted fully onto the axle sprocket. If you have
inserted the wheel correctly onto the wheel, when you release the spring
clip it will lock onto a groove on the end of the axle. If not locked properly,
the wheel will not be connected to the axle and will not be propelled! Test
the lock by trying to pull the wheel out.
X8 Locking buttonX3 Locking button
3. Frame Setup
X3 SERIES
Erect the frame by first unfolding the u-shaped frame piece (Pic-4).
Bring up the frame piece with the main hinge attachment and first
attach bottom of the hinge to the outside of the pin on the top of the
u-shape frame (Pic-5). Open the top frame and using the hinge lever,
attach it to the inside of the pin locking the entire joint together (Pic-6).
Left, Right Markers
X4 Sport
Pic-6
Pic-5
Pic-4
Left, Right Markers
X3 Sport
8
Pic-4 Pic-5 Pic-6
Pic-2 Pic-3
.............................................................
.........................................................................
X4 Series. Erect frame by unfolding and connecting the main frame
tubes together at the two frame locks. On the lower frame lock screw
(Pic-2) make sure the middle frame sets securely against
the lower frame so the screw lines up with the threaded
insert. On the upper locking screw (Pic-3) you have a range of
adjustment to the height depending .........
on your preference.
X8 Series
Erect the frame by first unfolding and connecting the main frame
sections together at the upper frame lock by fastening the upper
frame locking knob (Pic-5). The lower frame connection stays
loose and will be in place once the golf bag is attached (Pic-6).
5. Proceed in reverse for folding the caddy.
6. Place the battery pack on the
battery tray. Insert the 3-prong
battery plug into the caddy outlet
so the notch aligns properly. On
Advanced Lithium battery attach the
T-Connector. The SLA and Standard LI
Battery lead is already attached to battery.
Attach the Velcro Strap. Tightly fasten the Velcro Strap
underneath the battery tray and around the battery. It
is recommended that you DO NOT fasten the screw on
the plug to the outlet, so in case of tip-over, the cable
can unplug from the socket.
Note: BEFORE CONNECTING make sure that caddy power is OFF, the
Rheostat Speed Control is in OFF position and the Remote Control is
stored securely!
4.Frame Setup (Continued)
9
7. Insert anti-tip wheel (X3R,
X4R, X8R) into holding bar on
motor housing and secure
with pin.
Pin
X3R & X4R Anti-tip Wheel X8R Anti-tip Wheel
Speed Control Dial - The dial on the side of the handle controls
the forward speed of your Batcaddy. This dial should always
be turned off prior to powering on
your Caddy. This is done
by turning the dial counter clockwise un
til it clicks. Once you
have powered on your Caddy, slowly turn the dial clockwise
until the Caddy matches your preferred walking speed. Once your
desired speed is set you can use the Start/Stop button as described
above to stop and start your Caddy for the rest of the round. Speed
can be adjusted on the fly at any time by turning the dial up or
down while in motion.
1. Control Panel:
Power Button – Holding down the button for 3-5 seconds
will turn your Batcaddy on or off. A green/red
LED light will turn on behind the battery icon
(On Batcaddys equipped with a Timer Button, the
Power Button also acts as the Start/Stop button).
Start/Stop Button – (on select models) Pushing the button
while the Caddy is in motion will stop the Caddy.
Pushing the button again will start the Caddy again
and resume at the same speed when stopped. .
*NOTE -This is not a parking brake. Caddys need to be
properly angled when parking on slopes to keep them
from drifting.
Timer Button (on all models) – When your Batcaddy
is stopped pressing this button once will advance
the Caddy approximately 10 yards and it will stop on its
own. Pressing the button twice will advance it 20 yards, and
pressing 3 times will advance it 30 yards.
OPERATING YOUR BATCADDY
Manual Controls, X3, X4, X8 Series
POWER -
START/STOP
POWER -
START/STOP
TIMER -
X3/X4
X8
TIMER -
8. Unpack remote ontrol and install batteries with
plus and minus poles as indicated in the diagram in
the battery compartment of the unit.
10
OPERATING YOUR BATCADDY Continued
2. Press ON/OFF power button for about 3-5 seconds to turn caddy
on or off. (LED will light up)
3. Digital Cruise Control - Once the Caddy is powered up, you can use
the power button along with the speed control dial (rheostat) to stop
the Caddy at the current speed and then resume at the that same
speed. Set the desired speed with the Speed Control Dial (rheostat)
and then press the power button for one second when you want to
stop. Press the power button again and the Caddy will resume at the
same speed.
4. The Caddy is equipped with a 10, 20, or 30 yard Advanced Distance
Timer. Press the T button once, the Caddy will advance approximately
10 yards and stop, press twice for 20 yards, and 3 times for 30 yards.
You can stop the Caddy via the remote by pressing the stop button at
any time.
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Bat-caddy Aide à la mobilité
Manuels Aide à la mobilité populaires d'autres marques
Rhythm Healthcare
Rhythm Healthcare B3800F Manuel utilisateur
AMF-BRUNS
AMF-BRUNS PROTEKTOR Manuel utilisateur
Drive DeVilbiss Healthcare
Drive DeVilbiss Healthcare OTTER Manuel utilisateur
Rhythm Healthcare
Rhythm Healthcare C500U Manuel utilisateur
Lumex
Lumex RJ4200A Manuel utilisateur
Rebotec
Rebotec Jumbo Manuel utilisateur