Barska BAR-AX13094 Manuel utilisateur
Read all instructions before using this safe.
User Manual Pistol Keypad Safe
©2018 BARSKA®
855 Towne Center Drive | Pomona, CA 91767
(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com
1/18
BC558
Start
Open pistol safe with emergency keys and install 4 AA
batteries. Pay attention to the polarity of the batteries.
Note: Do not mix new and old batteries.
Register Pin Code
Press and hold the initialization button inside the safe until light
on keypad come on and two beeps heard.
Enter in desired Pin Code(4-6 digits) and press initialization
button again when finished. Then, Pin Code is registered
successfully.
NOTE: Default Pin Code is 1234. Once the Pin Code has been
registered with new Pin Code, the default Pin Code will be
replaced.
Open
Press set pin code and safe should open
Sound Option
Sound On/Off
Press and hold 4 button until light is seen to turn the sound for
the safe on/off.
Mounting
Parts
A. Mounting Bracket
B. Indicator Light
C. Key Pad
D. Key Access
E. Initialization Button
F. Battery Compartment
G. Mounting Area
WARNING
- Avoid leaving door open and unattended; it will allow
unauthorized individuals to reprogram the safe, gaining full
access to the safe and contents.
- Store emergency keys in a secure place; NOT inside of
the safe.
- Be aware of the load bearing. Failure to do so can result in
personal injury and/or damage to property. Use appropriate
tools when performing work and always use eye protection.
- When mounting the safe make sure the compartment has
enough space to drop open. The compartment requires gravity
to fully release, always install in a vertical position.
- Keep safe away from children.
NOTE: BARSKA is not responsible if the safe or its contents
gets lost or stolen
The safe can be mounted from the left or right with the
included mounting bracket.
Use proper drill tools and mounting hardware for the type of
surface you are mounting the safe too. Included screws are
designed to be used on wood surfaces.
1. Open the safe with the pin code or key.
2. Unscrew the thumbscrews located on the inside of the safe.
3. Remove the bracket by sliding it down and off of the safe.
4. Use the wall mounting holes on the side or top of the
mounting bracket to mark the desired mounting location.
5. Use appropriate mounting hardware to screw the bracket
into desired location.
6. Slide the safe onto the bracket screw in thumbscrews
located on the inside of the safe.
7. Close the safe
The safe is now ready to be used.
See reverse side for more information
a. Mounting Bracket Hole
b. Thumb Screw Hole
c. Wall Mounting Hole
Mounting Holes Of The Safe Mounting Holes Of The
Mounting Bracket
c
b
a
b
a
A
D
B C
G
E
F
Inside
Safe
BC323
1 YEAR LIMITED WARRANTY
BARSKA warrants this new safe to be free of original defects
in material and/or workmanship under normal use for a
period of twelve (12) months from the date product is
received by purchaser. This warranty does not include
damage caused by improper installation or maintenance.
Damage from misuse, abuse, accident (such as dropping),
normal wear and tear, fire, flood, or acts of nature. Damage
from service or repairs other than those performed by
BARSKA. Labor, cost and shipping charges for the removal
and replacement of defective parts beyond the initial
twelve-month warranty period. All transportation and shipping
charges. Removing or altering the seal under any
circumstances will automatically void the warranty.
This warranty is limited to original purchaser and is not
transferable. This warranty applies only to products
purchased in the United States.
Return Merchandise Number (RMA#) before any returns. The
RMA number must appear on the outside of the shipping
package. Product must be packed carefully and sturdily in its
original packaging to prevent damage in transit and returned
freight pre-paid to:
BARSKA OPTICS
Repair Department
855 Towne Center Drive
Pomona, CA 91767
Please include all of the following when returning BARSKA
products for service and/or replacement:
1. Please write your complete details (Name, Address,
Telephone #, E-mail address, RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
4. A Check/Money Order of $40.00 to cover inspection,
shipping and handling.
*Please allow 6-8 weeks for delivery.
BARSKA will examine and test returned product and repair or
replace defective part(s) or units with new part(s) or a new
unit if necessary within the warranty period. Purchaser is
required to remit $40.00 to BARSKA for return shipping and
handling at time product is returned. If repair is required after
warranty period expiration, purchaser will be charged for
replacement parts and return shipping.
BARSKA® Optics shall not be liable for any consequential,
incidental and/or contingent damages whatsoever. We will
not pay shipping, insurance or transportation charges from
you to us, or any import fees, duties and or taxes. This
warranty supersedes all previous BARSKA®
Optics warranties.
Autres manuels Barska Sûr
Barska
Barska AX12476 Manuel utilisateur
Barska
Barska AX13104 Manuel utilisateur
Barska
Barska DX Series Manuel utilisateur
Barska
Barska AX11968 Manuel utilisateur
Barska
Barska Biometric Safe Manuel utilisateur
Barska
Barska AX11970 Manuel utilisateur
Barska
Barska AX11652 Manuel utilisateur
Barska
Barska AX12672 Manuel utilisateur
Barska
Barska AX13308 Manuel utilisateur
Barska
Barska AX11970 Manuel utilisateur
Barska
Barska Digital Keypad Safe Manuel utilisateur
Barska
Barska AX12218 Manuel utilisateur
Barska
Barska AX12404 Manuel utilisateur
Barska
Barska Biometric Safe Manuel utilisateur
Barska
Barska AX13262 Manuel utilisateur
Barska
Barska AX11556 Manuel utilisateur
Barska
Barska AX11648 Manuel utilisateur
Barska
Barska AX11934 Manuel utilisateur
Barska
Barska AX11644 Manuel utilisateur
Barska
Barska AX11224 Manuel utilisateur
Manuels Sûr populaires d'autres marques
Honeywell
Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur
Hornady
Hornady SnapSafe Trunk Safe II Manuel utilisateur
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Manuel utilisateur
Honeywell
Honeywell 5912 Manuel utilisateur
Phoenix
Phoenix FS1280F Manuel utilisateur
Phoenix
Phoenix SS0992K Fiche d'information produit
