5
Technical certi cate
1.
Before use of greenhouse, assemble
and install it in accordance with the
manual.
When installing the greenhouse by
third parties, buyer should supervise
compliance of assembling with the
manual.
Operating rules
Cleaning and washing of polycarbonate sheets
1. Rinse sheet with warm water.
2. To remove dirt, wash it with mild soap solution or domestic detergent using a soft
cloth or sponge.
3. To remove water, rinse the sheet with cold water and wipe with a soft cloth.
Do not use sulphur cartridges for disinfecting greenhouse against fungal
and bacterial agents in order to prevent corrosion (darkening) of frame.
Never use abrasives or high-alkali detergents for cleaning polycarbonate
sheets. Dry wiping damages protective layer of the coverage and shortens its
service life. Never rub surface of polycarbonate sheets with a brush, metalized
fabric or other abrasive materials.
2.
In winter, coverage of greenhouse should not be removed provided that snow load is
limited. If greenhouse be unattended all winter period, buyer should either remove the
coverage or estimate possible snow load. Ultimate load for the frame having complete
package with installed drawbars and side braces is 180 kg per 1 m2 corresponding to
rated snow load of IV snow region (according to 2.01.07-85 Loads and Impacts building
norms and rules (SNiP)). In case of correctly installed greenhouse manufacturer
guarantees snow resistance of the greenhouse in Moscow, Sverdlovsk, Novosibirsk and
other oblasts with snow region number not higher than IV. Under purchase clarify snow
region where greenhouse is installed.
Do not install greenhouse close to
buildings and trees from which snow or
ice can fall down. 2 m or more distance
is recommended.
