Baofeng BF-88ST Manuel utilisateur

BF-88ST PRO SERIES

User Manual -English

Thanks for choosing BAOFENG!BF-88ST PRO is a FM two-way radio transceiver suitable for use in the 446 private mobile

radio service (PMR446). Programmed with the 16 PMR446 frequencies, Max Transmission power 500 mW, Bandwidth 12.5

kHz, Maximum transmission time limit 180 seconds, fixed antenna, no registration or fees. but restrictions of use may apply

in some Non-EU countries. For further information, we suggest you look at the “Restrictions on the use” chart.

ATTENTION!

Before using this product, read the RF Energy Exposure and Product Safety Guide that ships with the radio which contains

instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulation.

BAOFENG BF-88ST PRO is a multi-task PMR446 transceiver.

Combining the latest technology in radio communication along with a sturdy mechanical frame, BF-88ST PRO is the ideal and

effective solution for the professionals who need to stay in touch with the working team (in construction sites, buildings,

shows, trade fairs or hotels) or for leisure users that just want to keep up with friends and family.

Coverage

The maximum range depends on terrain condition and is obtained during use in an open space.

The only limitation to maximum possible range are environmental factors such as blockage caused by trees, buildings, or

other obstructions. Inside a car or a metallic construction, the range can be reduced. Normally the coverage in the city, with

buidings or other obstructions is about 1 or 2 Km. In open space but with obstructions like trees, leafs or houses the

maximum possible range is about 4-6 Km. In open space, without obstructions and in sight, like for example in mountain, the

coverage can be 10 Km.

Package Contents

• 2BF-88ST PRO transceiver • 2 belt clip

• 2 1200mAh Li-ion rechargeable battery pack • 2 desktop charger

Frequency Chart

Ch. Freq. (MHz) Ch. Freq. (MHz) Ch. Freq. (MHz) Ch. Freq. (MHz)

1 446.00625 5 446.05625 9 446.10625 13 446.15625

2 446.01875 6 446.06875 10 446.11875 14 446.16875

3 446.03125 7 446.08125 11 446.13125 15 446.18125

4 446.04375 8 446.09375 12 446.14375 16 446.19375

Main features

• 16 PMR446 Channels • Output power: ≤0.5W

• 2 Channels Watch • Sub-Codes Scan and Store

• Channel Monitor • Channel Scan Function

• 155 Sub-Codes (50 CTCSS codes/ 105 DCS codes) • 10 Selectable Call Tone Alerts

• Hands-Free Operation (VOX) • Call Alert

• Roger Beep Tone • Keypad Lock

• Battery Level Meter • Emergency Strobe Light

• Battery/Power Saver • Backlit LCD Display

• Low Battery Audible Alert • TOT (Time out timer)

• 2pin Kenwood headset jack • Li-Ion 1200mAh battery pack

• Keystroke Tones • Up to 10 km range*

• Battery Life: up to 18 hours (under typical use conditions) •LED Torch

*Range may vary depending on environmental and/or topographical conditions.

Battery recharge

BF-88ST PRO is equipped for using a 3.7V Li-ion rechargeable battery pack which can be recharged connecting the socket of

the AC/DC wall adaptor to a mains power socket and inserting the jack of the wall adaptor into the desktop charger plug. It

takes 4-5 hours to fully recharge the radio. For maximum battery life, we recommend charging the battery pack when the

BF-88ST PRO is off and the battery pack is fully discharged.

! Using a different battery charger other than the one specified can cause damage to your device or may even cause

explosions and personal injuries.

Main controls and parts of the radio

1. Antenna

2. Flashlight

3. Volume Knob with Power SW

4. Led indicator: RED - TX; GREEN - RX.

5. PTT button (Push-To-Talk)

6. LAMP button - Turn the LED flashlight on or off.

7. SCAN button - Activate or deactivate scanning.

8. Emergency button - Turn emergency alerts on or off.

9. Speaker and Built-in microphone

10. : Short press for channel selection. Long press to

initiate a ringtone on the current channel.

11. : A short press is used to activate menu functions

and confirm settings. Long press is used to lock and unlock

function keys.

12. Headset jack (Headset not included)

13. LCD Display

14. : Short press for channel selection. Long press for monitoring (for weak signal monitoring).

15. Li-ion Battery pack

LCD DISPLAY

1. Channel (1-16) 8. Activate the VOX function

2. Keypad Lock 9. Battery Indicator

4. Transmit Status 10. Select the DCS/CTCSS type of squelch method

5. Receive Status 11. Scan Indicator

Transmit power indicator. Low power only in PMR mode

13. Emergency alert function activated

7. Dual Channel Monitor 14.

Displays the set CTCSS tone or DCS code (CTCSS: 1-50; DCS: 1-105)

Basic Operations

In order to get the most out of your new radio, read this reference guide completely before attempting to operate the unit.

Power on/off and volume adjustment

Rotate the Power/Volume knob clockwise to turn the radio on. Rotate the control clockwise /counter-clockwise to adjust the

volume level as you prefer. To turn the radio off, rotate the control counter-clockwise till hearing a mechanical “click”.

Choosing a Channel

Your radio has 16 channels and 155 Sub-Codes you can use to talk to others. In order to speak to someone, both your radios

must be set to the same channel and Privacy code.

If the or button is locked, please press and hold the button for 2 seconds to unlock. Press the or

buttons to select one of the 16 PMR channels.

Keypad Lock

To avoid accidentally changing the radio settings, press the button for 2 seconds. The icon will appear on the

display. [PTT], and keys will still be active. Repeat the same procedure to unlock the keypad.

Talking on Your Radio

To talk to others using the radio:

(1) Press and hold the [PTT] button and speak in a clear, normal voice about 2-3 inches away from the microphone. While

you are transmitting, the TX→icon appears on the display. To avoid cutting off the first part of your transmission, pause

slightly after pressing the [PTT] button before you start talking.

(2) When you have finished speaking, release the [PTT] button. You can now receive incoming calls. While receiving, RX

displays.

Monitor Mode Feature

Your radio allows you to listen for weak signals on the current channel at the press of a key. To turn ON Monitor mode: Press

and hold button for 2 seconds until two beeps sound. The receiver circuit stays open, and both noise and weak signals

can be heard. The RXicon blinks. To turn OFF Monitor mode: Press and hold button for 2 seconds to return to

"Normal" mode; two beeps sound and the RXicon stops blinking and disappears.

Channel Scanning

Your radio can scan all 16 channels for activity. To enter, quickly press the button. Repeat the same procedure to exit.

Your radio will rapidly scan each of the 16 channels and stop on any active channel. Your radio will resume scanning after 5

seconds when the channel is no longer active. When you press the [PTT] button to transmit on an active channel, the

scanning function will stop and remain on the active channel for 10 seconds before resuming scan when [PTT] button is no

longer pressed. To resume scanning, quickly press the or button.

Scanning Sub-Codes

Press and hold button to enter the Sub-Codes scanning.

A flashing "CTC/DCS" will be in the left status display to indicate the radio is in Sub-Codes scanning mode.

In this mode, the lower display will cycle through the Sub-Codes as they are being tested. Once the bits of the received

Privacy code are determined, the "CTC/DCS" indicator will stop flashing.

Press the [PTT] button to save the scanned tone into memory.

8. Using the Flashlight

You can use this radio in an emergency. If you press button, the radio turns on the high-intensity LED flashlight on your

radio.

•Your radio operates normally when the emergency strobe is activated.

(1) Press button once, it will turn on continuously. (Always On mode)

(2) And then, press button once, the Strobe Light emits the emergency signal. (Strobe emergency mode)

(3) And then, press button once, the light will be turned off.

9. Emergency Alert

The Emergency Alert feature can be used to signal members in your group for help. The emergency alarm function is activated by menu

operation.

To activate the emergency alert function, press and hold the [Emergency] button on the top for 3 seconds. The radio will

send out a loud siren sound and the flashlight will flash.

Press the [Emergency] button to exit the emergency alert function.

WARNING: The Emergency Alert feature should only be used in the even of an actual emergency.

Menu Options

CTCSS/DCS tones selection

BAOFENG BF-88ST PRO can receive in two modes:

• Open traffic: in this case you will hear any communication transmitted on the selected channel;

• Group mode CTCSS/DCS: CTCSS/DCS tones are access keys that allow you to receive only messages coming from parties

using the same channel and code. The speaker will remain muted until the correct tone is received.

To activate 1 of 50 different CTCSS/105 DCS tones in RX and TX

1) Turn on the radio.

2) Select the desired channel.

3) Press once until the Display shows oF (blinking on the right side).

4) By pushing the or button the display will show CTCSS (ct blinking) or DCS (dc blinking); press to enter

the CTCSS or DCS tones. Now select the desired tone with the or buttons.

5) Press the PTT button to exit menu or to continue set up.

VOX function

BAOFENG BF-88ST PRO enables hands free conversations through VOX function.

1) To activate VOX function press the button 3 times and ‘VOX’ will appear on the display.

2) Use the or buttons to select the desired setting:

The VOX sensitivity can be set in 3 different levels:

• 1 = high sensitivity (normal voice with no background noise)

• 2 = Medium Sensitivity for most environments

• 3 = low sensitivity (useful in very noisy areas or if you talk loudly)

3) Press the PTT button to exit menu or to continue set up.

To disable the VOX function follow the instructions above and select option oF (OF: Disabled).

Setting and Transmitting Call Tones

BAOFENG BF-88ST PRO can transmit different call tones to other radios in your group so you can alert them that you want to

talk. Your radio has 10 call tones for you to choose from.

To select the call tones:

1) Press the button 4 times and " " will appear on the display.

2) Press or to change and listen to the call tone.

3) Press the PTT button to exit menu or to continue set up.

• To disable the Call Tones follow the instructions above and select option oF (OF: Disabled).

In order to transmit your call tone to other radios, set up the same channel and Sub-Code on your radio and press and hold

the button.

Emergency alarm type

With the emergency alert feature, you can signal to your group members that you need help. The alarm signal can only be

signaled that you need help by pressing the [Emergency] button after the emergency alarm function of the BF-88ST PRO is

activated.

Select an emergency alert type:

1) To activate emergency alert function press the button 5 times and until the display shows “ ”.

2) Use the or buttons to select the desired setting:

oF: Disabled

1. Local alarm, the radio itself emits an alarm sound;

2. Send an alarm tone on the current channel to signal to group members that you need help.

3) Press the PTT button to exit menu or to continue set up.

WARNING: The Distress Alert feature should only be used in a true emergency. If the receiving group does not respond to the

distress signal, Baofeng will not assume any responsibility.

Keypad beep

To deactivate the keypad beep, follow these steps:

1) Press the button 6 times and until “ ” is displayed.

2) Use the or buttons until the display shows “ ”.

3) Press the PTT button to exit menu or to continue set up.

Now you won’t hear any beep at the pressure of any button.

ROGER BEEP (End transmission tone)

When your transmission is finished (PTT released), BAOFENG BF-88ST PRO gives out a sound that indicates to the other party

that s/he can start talking. This function is enabled by default.

To deactivate it:

1) Press the button 7 times and until the display shows “ ”;

2) Using the buttons or select “off” and “ ” will be displayed;

3) Press the PTT button to exit menu or to continue set up.

Autres manuels pour BF-88ST

Table des matières

Langues :

Autres manuels Baofeng Radio bidirectionnelle

Baofeng

Baofeng UV-5R Series Guide de démarrage rapide

Baofeng

Baofeng UV-5R Series Manuel utilisateur

Baofeng

Baofeng H-888S Manuel utilisateur

Baofeng

Baofeng UV-85 Manuel utilisateur

Baofeng

Baofeng GT-18 Manuel utilisateur

Baofeng

Baofeng UV-17R Series Manuel utilisateur

Baofeng

Baofeng BF-F8TD Mode d'emploi

Baofeng

Baofeng UV3RPLUS Manuel utilisateur

Baofeng

Baofeng BF-88A Manuel utilisateur

Baofeng

Baofeng UV-B5 Manuel utilisateur

Baofeng

Baofeng G11S Manuel utilisateur

Baofeng

Baofeng UV-5R Series Mode d'emploi

Baofeng

Baofeng BF-88E Series Manuel utilisateur

Baofeng

Baofeng UV-B5 Manuel utilisateur

Baofeng

Baofeng BF-F8HP Manuel utilisateur

Baofeng

Baofeng BF-888S Manuel utilisateur

Baofeng

Baofeng BF-H6 Manuel utilisateur

Baofeng

Baofeng UV-3R plus Manuel utilisateur

Baofeng

Baofeng MP25 Series Manuel utilisateur

Baofeng

Baofeng BF-888S Manuel utilisateur

Baofeng

Baofeng UV-6 Instructions d'installation

Baofeng

Baofeng UV-3R Manuel utilisateur

Baofeng

Baofeng BF-5RA Manuel utilisateur

Baofeng

Baofeng Pofung P10UV Series Manuel utilisateur

Manuels Radio bidirectionnelle populaires d'autres marques

Midland

Midland 70-1526A/B Manuel utilisateur

HYT

HYT TC700 Manuel utilisateur

DNT

DNT Space100 Manuel utilisateur

Legacy

Legacy ProLine Series Manuel utilisateur

Evolveo

Evolveo FreeTalk XM2-2 Manuel utilisateur

AWC

AWC AWR1688+ Manuel utilisateur

Motorola

Motorola XT665d Manuel utilisateur

Cobra

Cobra 2-Way Radio Manuel utilisateur

Klutch

Klutch KR-400 Manuel utilisateur

Garmin

Garmin Rino 655t Manuel utilisateur

Motorola

Motorola TLK 150 Manuel utilisateur

Midland

Midland MXT275J Manuel utilisateur

Titan

Titan TR200 Manuel utilisateur

Cobra

Cobra CXT645 Manuel utilisateur

Tait

Tait TM9100 Manuel utilisateur

Yaesu

Yaesu FT-65R Manuel utilisateur

RELM

RELM RP3000 Manuel utilisateur

Motorola

Motorola ASTRO SRX 2200 Series Manuel utilisateur