B&B ARMR Vertical Pivot Manuel utilisateur

Installation and Operations Manual —VP Gate Operator 1

B&B ARMR

A Division of B&B Roadway and Security Solutions VP Revision B1

Vertical Pivot Gate

Operators

OPERATIONS AND MAINTENANCE

MANUAL

Model No.:_______________________

Serial No.: _______________________

B&B ARMR

Corporate Office & Tech Support:

5900 S. Lake Forest Drive

Suite 230

McKinney, TX 75070

Phone: (972) 385-7899

Toll Free: (800) 367-0387

Fax: (972) 385-9887

E-mail: [email protected]

[email protected]

www.bb-armr.com

MADE IN THE USA

Installation and Operations Manual —VP Gate Operator 2

B&B ARMR

A Division of B&B Roadway and Security Solutions VP Revision B1

Introduction

Welcome!

Congratulations on your purchase of a B&B ARMR Vertical Pivot (VP) gate operator. In

addition to providing detailed operating instructions, this manual describes how to install,

maintain, and troubleshoot your operator. If you require additional assistance with any aspect of

installation or operation, please contact us.

Safety

SYMBOL MEANING:

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of non-insulated "dangerous voltage" within the

product's enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instruction in the

literature accompanying the product.

Your safety is extremely important to us. If you have any

questions or are in doubt about any aspect of the equipment,

please contact us.

Installation and Operations Manual —VP Gate Operator 3

B&B ARMR

A Division of B&B Roadway and Security Solutions VP Revision B1

Important Safety Information

TO REDUCE THE RISK OF SERIOUS INJURY OR DEATH, READ AND

FOLLOW ALL INSTRUCTIONS PROVIDED IN THIS MANUAL.

1. Hydraulic slide gate operators are intended for vehicularuse only. Pedestrians

should use a separate walkthrough entrance designed for on-foot traffic.

2. Keep children away from gate movement area and off the gate operator. Never

let children operate or play with gate controls.

3. Install all warning signs provided with the gate operator so that they are

clearly visible from both sides of the gate.

4. It is the responsibility of the specifier, designer, purchaser, installer and end-

user to ensure the gate system is properly configured for its intended

application.

5. Use the emergency manual release only when the gate is not in motion.

6. Test gate operator and all related safety devices monthly. The gate must

reverse or stop when a safety device is tripped. The gate must stop upon

sensing a second sequential safety violation before reaching a limit switch. If

the gate utilizes a transmitting device on a safety edge, check the battery on a

regular basis to ensure proper operation. Failure to adjust and re-test the gate

operator properly can increase the risk of injury.

7. This gate operator utilizes a pumping system which contains hydraulic fluid.

Consult local EPA (Environmental Protection Agency) regulations for

damming requirements (if any) around the base of the gate operator.

8. Service and maintenanceof the gate operator should beperformed on a routine

basis bya qualified technician. Attempts to service the gate equipment by non-

qualified personnel could result in serious injury and will void all applicable

warranties.

SAVE THESE INSTRUCTIONS.

THIS MANUAL SHOULD BE LEFT WITH A RESPONSIBLE INDIVIDUAL AT THE

INSTALLATION SITE AND KEPT IN A DESIGNATED LOCATION FOR

MAINTENANCE OR TROUBLESHOOTING OPERATIONS

Installation and Operations Manual —VP Gate Operator 4

B&B ARMR

A Division of B&B Roadway and Security Solutions VP Revision B1

How to Contact Us

If you have any questions or experience any problems with your vehicle barrier—or if we can

help you with any other facility security issues—please contact us directly at:

Corporate/Tech Support:

B&B ARMR

5900 S. Lake Forest Drive, Suite 230

McKinney, TX 75070 USA

Telephone: (972) 385-7899

Toll Free: (800) 367-0387

Fax: (972) 385-9887

E-mail: [email protected]

[email protected]

Installation and Operations Manual —VP Gate Operator 5

B&B ARMR

A Division of B&B Roadway and Security Solutions VP Revision B1

Table of Contents

Introduction .............................................................................................................................. 2

Safety......................................................................................................................................... 2

How to Contact Us ................................................................................................................... 4

1General Description .......................................................................................................... 6

2Features............................................................................................................................. 7

3Models Available ............................................................................................................... 8

4Setting User Parameters on PLC ...................................................................................... 9

4.1 Setting The Date And Time (optional, not required).......................................................................................9

4.2 Setting The Max Run Timer.............................................................................................................................9

4.3 Turning ON / OFF The Timer To Close........................................................................................................10

4.4 Setting The Timer To Close...........................................................................................................................10

4.5 Setting The Inherent Safety ...........................................................................................................................11

5Initial Operation............................................................................................................... 11

5.1 Test Run the Operator...................................................................................................................................11

6Connecting Peripheral Devices .......................................................................................13

6.1 Test Peripheral/Safety Devices .....................................................................................................................14

6.2 Final Adjustments..........................................................................................................................................15

7The Interface Board .........................................................................................................16

8Maintenance.....................................................................................................................17

9Appendix ..........................................................................................................................18

9.1 General Parts Breakdown.............................................................................................................................19

10 Troubleshooting...............................................................................................................24

10.1 Alarm Definitions –..................................................................................................................................24

10.2 PLC Input/Output Definitions –...............................................................................................................24

Equipment Maintenance Log Form .......................................................................................27

11 Warranty Information ......................................................................................................28

Installation and Operations Manual —VP Gate Operator 6

B&B ARMR

A Division of B&B Roadway and Security Solutions VP Revision B1

1 General Description

The B&B ARMR VP series gate operators are designed to reliably operate any style gate

panel up to 24 feet long and 8 feet high, allowing for an additional 1 foot of barbed wire.

Common applications include automatic operation of commercial and residential entry

gates, condo and subdivision access control gates and airport security gates. The operator

is durable under heavy use in both commercial and residential installations. The design

incorporates a number of excellent features intended to improve safety and security,

increase reliability and reduce maintenance.

Controls operate on safe and reliable 24VAC voltage (24VDC on Fail Safe and Battery

Backup units). A transformer, completely prewired, is installed in each operator to step

down the input voltage.

The operator actuates the gate by using a hydraulic cylinder, causing the gate panel to

pivot upright on a sturdy pivot shaft, mounted on a series of pillow blocks. The gate panel

is bolted to the frame which is welded to the pivot shaft, which allows for easy servicing or

replacing of the gate panel should such an event become necessary.

Rotation direction (open or close) is determined by the hydraulic valve system, not by the

direction of the electric motor rotation. This independence from electric motor rotation

results in several advantages. Gate travel can be instantly reversed. And because this can

be accomplished with changing the motor rotation, brakes are not required.

B&B’s warranty reflects confidence in the commitment to the quality of the products. VP

operators carry a 2 year factory warranty, the best available.

B&B ARMR is a subsidiary of B&B Roadway and Security Solutions. B&B was founded

in 1926 and has built its reputation over the years on responsive customer service and the

highest quality products. B&B is proud of its reputation and strives to continually renew it

with each operator it manufactures.

Installation and Operations Manual —VP Gate Operator 7

B&B ARMR

A Division of B&B Roadway and Security Solutions VP Revision B1

2 Features

Safe 24VAC controls standard (24VDC on Fail Safe and Battery Backup units)

Low maintenance –no sprockets, chains, brakes, or springs to adjust

Prewired PLC board with many built in features and plug in options, eliminates complex

and confusing internal circuit wiring

Wide range of control options, including but not limited to combinations of:

Remote pushbutton station(s)

Loop detector

Single button control

Auto exit

Obstruction detector

Emergency open

Autoclose timer

Radio control

Master/slave control

Warning light/buzzer

Gate panel can be designed to match road gradient

Complete easy reference wiring diagrams for all standard control options

Built in adjustable maximum run timer

Instant reverse capability during close cycle for safety and obstruction detection

Inherent safety

115/208/230 single phase and 208/230/440 three phase units available

Continuous duty capability

Rigid steel channel pivot frame for easy gate panel mounting

No chains to cut or pins to remove, increases security

Pry resistance –hydraulic cylinder automatically locked when unit is de-energized

Clearly illustrated installation, maintenance and troubleshooting instructions

Bypass valve quick action release for manual operation

Limited 2 year factory warranty

Installation and Operations Manual —VP Gate Operator 8

B&B ARMR

A Division of B&B Roadway and Security Solutions VP Revision B1

3 Models Available

Standard model

Rotation speed: 90° to open in under 10 seconds

Recommended gate opening: up to 24 feet long

“B” Models

Battery Backup model

Rotation speed: 90° to open in under 10 seconds

Recommended gate opening: up to 24 feet long

Maintains normal operation during power failures

Primary power of 115 & 240VAC single phase only

Gate Panel Configuration

Amplimesh

Chain link

Ornamental picket

Custom

Other Gate Operator Models

B&B also manufactures the VL series of Vertical Lift gate operators, LXL series slide gate

operators, CF series of Correctional Facility gate operators as well as related crash rated

barriers and arms, and is continually developing new products.

Contact the factory or an authorized representative of B&B for additional information.

Installation and Operations Manual —VP Gate Operator 9

B&B ARMR

A Division of B&B Roadway and Security Solutions VP Revision B1

4 Setting User Parameters on PLC

4.1 Setting The Date And Time (optional, not required)

1. Turn power on. Date and time will be

flashing. Press the ESC key.

2. This is the main menu. Use the UP

and DOWN arrow keys to select ‘Set

Clock’, and press the OK button.

3. Press OK again. A cursor flashes

under the parameter to be changed.

4. Use the UP and DOWN arrow keys

to change the value. Use the LEFT

and RIGHT arrow keys to move

between lines.

5. Press OK when finished.

NOTE: *Time format is military time

only.

4.2 Setting The Max Run Timer

1. From the main menu, select ‘Set

Param’.

2. Use the UP arrow to scroll to the

MAX RUN screen and press OK.

3. Press OK again to activate cursor.

4. Use the arrow keys to set the desired

time.

5. Press OK to save

>Stop

Set Param

Set Clock

Prg Name

Set Clock

Su 00:00

YYYY-MM-DD

2003-01-01

MAX RUN

T =20:00

Ta=00:00

Bottom number

shows elapsed time.

Installation and Operations Manual —VP Gate Operator 10

B&B ARMR

A Division of B&B Roadway and Security Solutions VP Revision B1

4.3 Turning ON / OFF The Timer To Close

With the unit powered down and the gate

in the closed position, locate the supplied

3 button control station and do the

following (in order):

1. Press and hold the STOP button

2. While holding the STOP button,

press and hold the CLOSE

button.

3. While holding the STOP and

CLOSE buttons, press and

release the OPEN button.

4. Release the CLOSE button, then

the STOP button.

5. Trigger the open limit switch. If

the timer is on, you will see the

screen to the left.

6. Repeat step 1 to toggle the timer

off

NOTE: The AutoClose screen will not be

visible if the timer is turned off

There is a 3 minute window with which

to turn the timer to close on or off each

time the operator power is turned on.

4.4 Setting The Timer To Close

1. From the main menu, select ‘Set

Param’.

2. Use the UP arrow to scroll to the

AUTO CLS screen and press OK.

3. Press OK again to activate cursor.

Use the arrow keys to set the desired

time.

4. Press OK to save

Note: s = seconds, m = minutes, h =

hours

AutoClose

Activated

00:00s

Bottom number

shows elapsed time.

OPEN

STOP

AutoCLS

T =20:00s

Ta = 00:00

Bottom number shows

elapsed time.

Table des matières

Autres manuels B&B ARMR ouvre-porte

B&B ARMR

B&B ARMR LXL-15vp-SS Manuel utilisateur

Manuels ouvre-porte populaires d'autres marques

Elite

Elite CSW200UL Manuel utilisateur

CAME

CAME FROG-PM4 Manuel utilisateur

SOMFY

SOMFY FX230 Manuel utilisateur

Aprimatic

Aprimatic ONDA 500 Manuel utilisateur

Turnstiles

Turnstiles FSW 900 Manuel utilisateur

Erreka

Erreka BUL BL33 Mode d'emploi

Erreka

Erreka VULCAN S Manuel utilisateur

Beninca

Beninca R1-2 WBV Manuel utilisateur

Erreka

Erreka VULCAN D Manuel utilisateur

Motorline professional

Motorline professional FORT Mode d’emploi

Beninca

Beninca BOB5024 Manuel utilisateur

AGA

AGA GATEMASTER 900 HD Manuel utilisateur

Chamberlain

Chamberlain MotorLift HC280ML Manuel utilisateur

SOMFY

SOMFY Dexxo RTS Pro Manuel utilisateur

Cardin

Cardin BL Series Manuel utilisateur

Westfalia

Westfalia 85 27 06 Manuel utilisateur

CAME

CAME F500 Manuel utilisateur

Extel

Extel VERA Manuel utilisateur