Bajaj Juice Extractor Manuel utilisateur
bajaj electricals limited Page 1of 2
Know Your
bajaj
Juice Extractor
Dear Customer,
Welcome to the world of Bajaj Home Appliances, You are now the proud owner of a Bajaj Juice
Extractor. This compact, user friendly home appliance will help you to extract the juices from your
favourite fruits and vegetables. This juice Extractor is a great time saver and a convenient gadget.
Separate collecting bowls for juice and pulp, interlocking switch which ensures unit does not run till
the clamps are locked for total safety, transparent view window on top, on line removable juice
and pulp containers, durable stainless steel mesh, capacity marking on juice collecting bowl are
some of the salient features of the Bajaj Juice Extractor.
This booklet will help you to understand and use your Juice Extractor properly. It gives you ample
instructions on its operation.
We hope, in addition to the juice extractor, you would like to possess many more Bajaj Appliances
in future.
TECHNICAL DATA
Model : Bajaj Juice Extractor
Power Supply : 230 Volts A.C. 50 Hz.
Wattage : 250 Watts
R.P.M. : 16,000
Rating : 5 Minutes
Insulation : Class B
Juice container capacity : 600 ml.
Body material : ABS
Mesh material : Stainless Steel
PRECAUTIONS BEFORE USE
•Read the instructions carefully before use.
•Keep the juice Extractor away from heat and sunlight.
•Unplug when not in use.
•Chop the fruits/vegetables small enough to feed through the feeder opening.
•Never switch on the Juice Extractor unless the top cover is firmly locked in to position.
•Do not run the Juice Extractor for more than specified rating at a stretch.
•Do not run the unit without load.
•Clean the mesh/cutter after each use.
•Clean the main motor body unit only with moist cloth, do not immerse the body in water.
bajaj electricals limited Page 2of 2
•Do not attempt to repair the unit at home or allow any unauthorised person to do so
either.
•In the event of the unit needing attention, take it to the nearest Bajaj authorised service
dealer or branch service center.
IDENTIFICATION OF PARTS
HOW TO USE THE JUICE EXTRACTOR
01. Place the mesh housing on the main motor body unit.
02. Keep the mesh at its place inside the mesh housing.
03. Place the top cover over the mesh housing onto the juicer body and lock the side clamps.
Note that the Juice Extractor will not operate until the side clamps are locked in
place.
04. Keep the Pulp container & Juice container at their respective places. To keep the pulp
container in place, align the top horizontal edge of the pulp container with the top cover
edge, just below the view window on both the sides and push it firmly towards the vertical
edge of the top cover. Press the pulp container downwards to lock it firmly in place.
05. Wash and cut the fruit/vegetables to pieces, small enough to feed them through the feeder.
06. Plug in the unit to the power supply, switch on. Push the fruit/vegetable pieces through the
feeder with the help of pusher.
07. The juice will be collected in the juice container and the pulp will fall into the pulp container.
08. Remove the juice and the pulp from the respective containers whenever they are full. For
removing the pulp container, press the pulp container upwards and just pull it out.
09. At the end of the operation switch off the unit, unplug.
10. Unclamp the top cover and remove. Remove the mesh from the unit; clean it with the help
of nylon wire brush under a jet of tap water.
11. Clean the juice/pulp containers with the help of liquid detergent and water.
12. After drying, re-assemble the unit as described above and store it properly for the next use.
Table des matières
Autres manuels Bajaj presse-agrumes
